journal article·2021-05-01Open access

A detailed electrochemical analysis of sensitized AISI 410 martensitic stainless steel

Khashayar Morshed-Behbahani, Pooria Najafisayar, Nika Zakerin, Mahmoud Pakshir

Materials Research Express· Volume 8· Issue 5

Abstract

Abstract In the present work, the effect of sensitization heat treatment on the intergranular corrosion (IGC) behavior of AISI 410 martensitic stainless steel was investigated using potentiodynamic electrochemical impedance spectroscopy (PDEIS) in conjunction with conventional methods including acid etching test, anodic potentiodynamic polarization, double-loop electrochemical potentiodynamic reactivation (DLEPR) and electrochemical noise (EN). Microstructural studies by scanning electron microscopy revealed that increasing tempering time up to 2h would be followed by more severe localized attack, but desensitization state attributed to specimens undergone prolonged tempering cannot be interpreted based on the standard test method. Susceptibility to IGC via DLEPR experiments indicates differences in the degree of sensitization (DOS) of specimens with varying tempering time, revealing a healing effect arising from prolonged tempering. The EN results elucidated the alloy tendency for active dissolution, but no obvious correlation can be established between the EN results and IGC behavior. The PDEIS data clarified that the charge transfer resistance values related to the AC responses in the middle of transpassive potential region can be utilized to investigate and compare the IGC susceptibility of the alloy. Moreover, the surface morphology of corroded samples under such experimental conditions can be used to qualitatively compare the severity of intergranular attack.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Influence of heat treatment on the microstructure and corrosion resistance of 13 wt pct Cr-type martensitic stainless steel10.1007/s11661-015-3180-1 ↗
2. Influence of the heat treatment on the corrosion resistance of the martensitic stainless steel type AISI 42010.1023/A:1025179128333 ↗
3. Metallic and ceramic biomaterials: current and future developments10.1007/978-0-387-47683-4_1 ↗
4. Metallic biomaterials
5. A survey on the passivity of tempered AISI 420 martensitic stainless steel10.1016/j.corsci.2021.109340 ↗
6. Intergranular corrosion in a martensitic stainless steel detected by electrochemical tests10.5006/1.3284032 ↗
7. Effect of austenitizing heat treatment on the microstructure and hardness of martensitic stainless steel AISI 42010.1007/s11665-011-0043-9 ↗
8. Influence of tempering treatment on microstructure and pitting corrosion of 13 wt.% Cr martensitic stainless steel10.1016/j.corsci.2017.12.012 ↗
9. Characterization of precipitates in X12CrMoWVNbN10-1-1 steel during heat treatment10.1016/j.jnucmat.2014.06.018 ↗
10. Intergranular corrosion susceptibility in supermartensitic stainless steel weldments10.1016/j.corsci.2009.06.009 ↗
11. Examination of the influence of heat treatment on the corrosion resistance of martensitic stainless steels10.1002/maco.201407861 ↗
12. Correlation between sensitisation and pitting corrosion of AISI 403 martensitic stainless steel10.1016/j.corsci.2014.12.009 ↗
13. The effect of surface modification on the corrosion protection ability of the passive films of sensitized UNS S31803 duplex stainless steel10.1080/1478422X.2018.1556865 ↗
14. Double loop electrochemical potentiokinetic reactivation test optimization in checking of duplex stainless steel intergranular corrosion susceptibility10.1007/s11661-004-0187-4 ↗
15. Effects of strain and grain size on carbide precipitation and corrosion sensitization behavior in 304 stainless steel10.1016/S1359-6454(97)00106-7 ↗
16. Effect of different degrees of sensitization on the EIS Response of 316L and 316 SS in transpassive region10.1007/s11665-014-1018-4 ↗
17. The effect of solution-annealing on the EIS response of AISI 316 SS with different degrees of sensitization in the transpassive region10.1134/S2070205115060039 ↗
18. Damage mechanism at different transpassive potentials of solution-annealed 316 and 316l stainless steels10.1007/s12613-015-1042-x ↗
19. An electrochemical study on the effect of stabilization and sensitization heat treatments on the intergranular corrosion behaviour of AISI 321H austenitic stainless steel10.1016/j.corsci.2018.03.043 ↗
20. The electrochemical behavior of austenitic stainless steel with different degrees of sensitization in the transpassive potential region in 1 M H2SO4 containing chloride10.1016/j.corsci.2003.09.020 ↗
21. Study of the intergranular corrosion of sensitized UNS S31803 Stainless Steel in transpassive region10.1007/s11665-016-2176-3 ↗
22. Lasia · 2014
23. Exploring the interfaces between metal electrodes and aqueous electrolytes with electrochemical impedance spectroscopy10.1039/c3an00791j ↗
24. Study on surface termination of boron-doped diamond electrodes under anodic polarization in H2SO4 by means of dynamic impedance technique10.1016/j.carbon.2015.10.064 ↗
25. Investigating the oxygen evolution reaction on Ir(111) electrode in acidic medium using conventional and dynamic electrochemical impedance spectroscopy10.1016/j.electacta.2019.07.047 ↗
26. Corrosion assessment of Ag and Cr modified Fe40Al intermetallic alloy in Hanks solution by electrochemical noise10.20964/2020.08.65 ↗
27. Electrochemical noise measurements of advanced high-strength steels in different solutions10.3390/met10091232 ↗
28. Electrochemical noise analysis to examine the corrosion behavior of Ni-P deposit on AM60B alloy plated by Zr pretreatment10.1016/j.surfcoat.2018.04.032 ↗
29. Electrochemical noise analysis in the frequency domain and determination of corrosion rates for SS-304 stainless steel10.1016/j.msea.2006.07.078 ↗
30. Effect of Tempering Treatments on Microstructure and Intergranular Corrosion of 13 wt% Cr Martensitic Stainless Steel10.5006/2141 ↗
31. Corrosion properties of a complex multi‐phase martensitic stainless steel depending on the tempering temperature10.1002/maco.201508229 ↗
32. Perspective on the Passivity of Ti6Al4V Alloy in H2SO4 and NaOH Solutions10.1016/j.molliq.2021.115947 ↗
33. An Electrochemical Study on the Passivity of Age Hardened Al-Mg-Si Alloy10.1016/j.jmrt.2020.10.077 ↗
34. In Vitro Electrochemical Behavior of Aged Ti-6Al-4V Alloy: A Trial of the Point Defect Model, Materials Today10.1016/j.mtcomm.2021.102327 ↗
35. Effect of aging temperature on corrosion behavior of sintered 17-4 PH stainless steel in dilute sulfuric acid solution10.1007/s11665-017-2778-4 ↗
36. Effect of chloride and sulfate ions in simulated boiler water on pitting corrosion behavior of 13Cr steel10.1016/j.corsci.2015.04.005 ↗
37. A New Method for Electroplating of Crack-Free Chromium
38. An electrochemical impedance spectroscopy study of the corrosion behaviour of PVD coated steels in 0.5 N NaCl aqueous solution: Part II.: EIS interpretation of corrosion behaviour10.1016/S0010-938X(02)00214-7 ↗
39. Understanding the inhibiting properties of 3-amino-1, 2, 4-triazole from fractal analysis10.1016/j.surfcoat.2003.11.019 ↗
40. Quantitative evaluation of aged AISI 316L stainless steel sensitization to intergranular corrosion: comparison between microstructural electrochemical and analytical methods10.1007/s11661-007-9114-9 ↗