Simulation of dynamic recrystallization process of SA-765Gr.II alloy steel using level-set method
Source abstract
Abstract
Abstract As a key component of steam generators and pressure vessels, the SA-765Gr.II nuclear power tube sheet’s mechanical properties are determined by microstructure, thus making the control and prediction of its microstructural evolution highly significant. A numerical method combining the Yoshie–Laasraoui–Jonas (L–J) dislocation dynamics model with level-set (LS) approach was proposed in this study. By employing this method, the SA-765Gr.II alloy steel dynamic recrystallization (DRX) process and microstructural evolution can be accurately predicted. Isothermal compression tests of SA-765Gr.II alloy steel using the Gleeble-1500D thermal-mechanical simulator were conducted within 950 °C–1200 °C temperature and 0.005–5 s −1 strain rates. Based on the experimental data, the L–J dislocation dynamics model using dislocation density as an internal variable was established. Through secondary development of software, the L–J dislocation dynamics model was integrated into the LS method finite element model. Meanwhile, in order to characterize the initial grain size of finite element model accurately, an in-situ reconstruction method was proposed using original metallographic images. This method was employed to rebuild precise initial grain size in the DRX finite element model, and the DRX behavior of SA-765Gr.II alloy steel during hot deformations were simulated by using the developed finite element DRX model. The results showed the average grain size maximum relative error between simulations and experiments was less than 9.3%, the established finite element model accuracy for material microstructure evolution was verified. In order to further investigate the effective of deformation conditions on the SA-765Gr.II alloy steel microstructure, DRX simulation under the 1050 °C–1200 °C temperature and 0.01–0.5 s −1 strain rates and 0.7 maximum true strain were analyzed. The simulation results showed that a fine and homogeneous grain structure was achieved at 1050 °C and 0.1 s −1 strain rate and 0.7 true strain. This research provided a theoretical basis for the accurate control and prediction of grain evolution and grain size in the hot forging process of SA-765 Gr. II alloy steel.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Henan University of Science and Technology
Jeju National University
References (40)
Show source-provided references
1. Dynamic recrystallization behavior and texture evolution during extrusion of Mg-2.0Y-2.0Zn-2.0Al-0.3Mn alloy10.1016/j.jallcom.2025.180499 ↗
2. Experimental study and numerical simulation of dynamic recrystallization behavior of TiAl-based alloy10.1016/j.matdes.2017.02.088 ↗
3. Study on the hot deformation behavior of a novel multi-element synergistic strengthening Mg-Al-Ca-Mn-Zn-Sn alloy10.1016/j.jallcom.2023.170156 ↗
4. Discontinuous dynamic recrystallization of TiNb alloys: experiment and cellular automaton simulation10.1007/s11771-023-5430-5 ↗
5. Multiscale modeling of discontinuous dynamic recrystallization during hot working by coupling multilevel cellular automaton and finite element method10.1016/j.ijplas.2021.103064 ↗
6. Coupled quantitative modeling of microstructural evolution and plastic flow during continuous dynamic recrystallization10.1016/j.ijplas.2022.103372 ↗
7. A multiscale coupled Monte Carlo model to characterize microstructure evolution during hot rolling of Mo-TRIP steel10.1016/j.actamat.2013.08.030 ↗
8. An integrated full-field model of concurrent plastic deformation and microstructure evolution: application to 3D simulation of dynamic recrystallization in polycrystalline copper10.1016/j.ijplas.2015.12.010 ↗
9. Developing and validating a fully coupled model of non-local crystal plasticity and probabilistic cellular automata for dynamic recrystallization simulation10.1016/j.ijplas.2025.104375 ↗
10. Review on modeling and simulation of dynamic recrystallization of martensitic stainless steels during bulk hot deformation10.1016/j.jmrt.2022.03.179 ↗
11. A new method for optimizing hot processing parameters of Mg-6.0Zn-0.5Mn-0.5Er alloy based on kinetic model of dynamic recrystallization and processing map10.1007/s11665-018-3443-2 ↗
12. A non-equilibrium thermodynamic framework for viscoplasticity incorporating dynamic recrystallization at large strains10.1016/j.ijplas.2021.102988 ↗
13. A multi-physics model for the evolution of grain microstructure10.1016/j.ijplas.2024.104201 ↗
14. Hot compression behavior, simulation verification and dynamic recrystallization mechanism of Mg-Gd-Y-Zr alloy10.1016/j.jmrt.2024.07.097 ↗
15. Coupled CA-FE simulation for dynamic recrystallization of Mg-8Gd-4Sm-1Zn-0.5Zr alloy during hot compression deformation10.1007/s12540-024-01839-x ↗
16. Combining crystal plasticity and phase field model for predicting texture evolution and the influence of nuclei clustering on recrystallization path kinetics in Ti-alloys10.1016/j.actamat.2023.119645 ↗
17. Coupled cellular automata-crystal plasticity modeling of microstructure-sensitive damage and fracture behaviors in deformation of α-titanium sheets affected by grain size10.1016/j.ijplas.2024.104138 ↗
18. Crystal plasticity-phase-field based analyses of interfacial microstructural evolution during dynamic recrystallization in a dual phase titanium alloy10.1016/j.ijplas.2024.104087 ↗
19. Modeling the dynamic recrystallization in austenitic stainless steel using cellular automaton method10.1016/j.commatsci.2013.11.029 ↗
20. Modeling of dynamic and post-dynamic recrystallization by coupling a full field approach to phenomenological laws10.1016/j.matdes.2017.08.015 ↗
21. A new micromechanics based full field numerical framework to simulate the effects of dynamic recrystallization on the formability of HCP metals10.1016/j.ijplas.2019.09.011 ↗
22. A new finite element strategy to simulate microstructural evolutions10.1016/j.commatsci.2019.109335 ↗
23. New finite element developments for the full field modeling of microstructural evolutions using the level-set method10.1016/j.commatsci.2015.07.042 ↗
24. Development of a level set methodology to simulate grain growth in the presence of real secondary phase particles and stored energy—application to a nickel-base superalloy10.1016/j.commatsci.2014.03.054 ↗
25. Finite element model of primary recrystallization in polycrystalline aggregates using a level set framework10.1088/0965-0393/17/6/064006 ↗
26. 2D finite element modeling of misorientation dependent anisotropic grain growth in polycrystalline materials: level set versus multi-phase-field method10.1016/j.commatsci.2015.03.012 ↗
27. 3D processing map and hot deformation behavior of 6A02 aluminum alloy10.1016/j.jallcom.2018.01.299 ↗
28. Coupled CA-FE simulation for dynamic recrystallization microstructure evolution of AZ61 magnesium alloy10.1007/s12540-024-01757-y ↗
29. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions10.1016/j.pmatsci.2013.09.002 ↗
30. An electron backscattered diffraction study on the dynamic recrystallization behavior of a nickel-chromium alloy (800H) during hot deformation10.1016/j.msea.2013.07.037 ↗
31. Cellular automata simulation of dynamic recrystallization behavior of AZ81-1Y magnesium alloy based on Laasraoui–Jonas model10.1007/s11665-024-09484-6 ↗
32. Investigation of hot deformation behavior of forged 42CrMoA steel by cellular automata method based on topological deformation technique10.1007/s10853-024-09649-7 ↗
33. Hot deformation and dynamic recrystallization behavior of Cu-3Ti-3Ni-0.5Si alloy10.1016/j.jallcom.2018.12.212 ↗
34. Hot deformation behavior and microstructure evolution model of 7055 aluminum alloy10.1016/j.jmrt.2023.10.165 ↗
35. Simulation of dynamic recrystallization in 7075 aluminum alloy using cellular automaton10.1007/s11595-024-2898-2 ↗
36. Prediction of steel flow stresses at high temperatures and strain rates10.1007/BF02667368 ↗
37. The mechanism of plastic deformation of crystals. Part I.-Theoretical10.1098/rspa.1934.0106 ↗
38. A one-parameter approach to determining the critical conditions for the initiation of dynamic recrystallization10.1016/1359-6454(95)00146-7 ↗
39. The effect of nucleation models on dynamic recrystallization I. Homogeneous stored energy distribution10.1080/13642819308215285 ↗
40. Arrhenius constitutive model and dynamic recrystallization behavior of 18CrNiMo7-6 steel10.1016/j.jmrt.2023.04.192 ↗