journal article·2026-05-28Open access

Charpy impact testing of direct metal laser sintering of AlSi10Mg alloy: process parameters and microstructural investigation

Sıla Ulusoy, Ahmet Meram, Mehmet Emin Çetin

Materials Research Express· Volume 13· Issue 10

Abstract

Abstract This study investigates the effect of manufacturing parameters on the impact behavior of Charpy test specimens produced from AlSi10Mg alloy using laser powder bed fusion (LPBF) process. For this purpose, specimens were produced using two layer thicknesses (30 µ m and 60 µ m), two infill patterns (grid and rectilinear), and three scanning angles (0°, 45°, and 90°). The effects of these parameters on impact toughness were experimentally evaluated. V-notched Charpy impact tests were performed, and the absorbed fracture energy (J) and fracture angle (°) were determined. Fracture surfaces were further examined with scanning electron microscopy (SEM) to evaluate pore morphology, dimple formation, and fusion quality. The results show that absorbed fracture energy decreases as the scan angle increases. Ductile fracture was predominantly observed at 0°, while brittle fracture behavior became dominant at 45° and 90°. Increasing layer thickness reduced interlayer bonding quality, leading to lack-of-fusion defects. Accordingly, the 30 µ m specimens generally exhibited a denser microstructure and higher absorbed energy (∼9 J). The grid ( G ) infill pattern provided more stable energy absorption compared to the rectilinear ( R ) pattern. SEM observations clearly demonstrated the effect of processing parameters. In particular, the 30 µ m specimens with rectilinear infill, exhibited homogeneous melt pools and distinct dimple formation, indicating ductile fracture. In contrast, the 60 µ m specimens showed larger pores, interlayer fusion defects, and directional tearing characteristics. At a scan angle of 90°, fracture surfaces exhibited a more multidirectional character, while at 0° crack propagation was predominantly uniaxial. The highest impact toughness was obtained for the 30- G -0 condition (∼9 J), and the lowest for the 30- R -90 condition (∼5 J). The findings indicate that LPBF processing parameters have a decisive effect on the impact strength and fracture morphology of AlSi10Mg alloy. These results provide insight into parameter optimization and a better understanding of microstructure mechanical property relationships in components manufactured with LPBF.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Cellular and Composite Structures · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

KTO Karatay University

Deceased.

References (42)

Show source-provided references
1. Evaluation of the impact behaviour of AlSi10Mg alloy produced using laser additive manufacturing10.1016/j.msea.2019.01.078 ↗
2. Additive manufacturing of metals10.1016/j.actamat.2016.07.019 ↗
3. A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: processing, microstructure, and properties10.1016/j.pmatsci.2015.03.002 ↗
4. Charpy impact testing of metallic selective laser melting parts virtual
5. Titanium-based alloys and composites for orthopedic implant applications: a comprehensive review10.1016/j.matdes.2024.112850 ↗
6. Frontiers of 3D printing/additive manufacturing: from human organs to aircraft fabrication10.1016/j.jmst.2016.08.011 ↗
7. Review of selective laser melting: materials and applications10.1063/1.4935926 ↗
8. Vasco · 2021 · 505
9. New possibilities in the fabrication of hybrid components with big dimensions by means of selective laser melting (SLM)10.1016/j.phpro.2016.08.087 ↗
10. Solidification in metal additive manufacturing: challenges, solutions, and opportunities10.1016/j.pmatsci.2024.101361 ↗
11. Additive manufacturing of metallic components: process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
12. Challenges and developments in wire arc additive manufacturing of steel: a review10.1016/j.rineng.2025.104657 ↗
13. A sustainable strategy for wire arc additive manufacturing of high-performance duplex stainless steel: microstructural refinement and mechanical anisotropy reduction10.1016/j.msea.2025.148785 ↗
14. Damage tolerance performance of high strength and toughness titanium alloys formed by additive manufacturing in aerospace: a review10.1016/j.revmat.2025.100003 ↗
15. Titanium alloys for biomedical applications: a review on additive manufacturing process and surface modification technology10.1007/s00170-025-15287-3 ↗
16. Progress in additive manufacturing of nickel-based superalloys: materials, processing, microstructures, properties and alloy design10.1007/s12598-025-03247-5 ↗
17. Advances and challenges in energy field assisted additive manufacturing nickel-based superalloys: printability, microstructure, and performance10.1016/j.jmst.2025.03.010 ↗
18. A comprehensive overview of additive manufacturing aluminum alloys: classifications, structures, properties and defects elimination10.1016/j.msea.2024.147464 ↗
19. Additive layer-by-layer simulation and process parameter optimization for dynamic performance by additive manufacturing using selective laser melting of AlSi10Mg alloy10.1007/s00170-025-16216-0 ↗
20. Recent progress in the development of aluminum alloys to prevent defects in additive manufacturing10.1007/s11837-025-07708-1 ↗
21. Analysis on the consequence of defect formation during the melt pool creation in the DMLS AlSi10Mg parts: additive ratio assessment (ARAS) and experimental study10.1016/j.engfailanal.2025.109285 ↗
22. The microstructure and mechanical properties of selectively laser melted AlSi10Mg: the effect of a conventional T6-like heat treatment10.1016/j.msea.2016.04.092 ↗
23. Additive manufactured AlSi10Mg samples using selective laser melting (SLM): microstructure, high cycle fatigue, and fracture behavior10.1016/j.matdes.2011.07.067 ↗
24. Mechanical properties of AlSi10Mg produced by selective laser melting10.1016/j.phpro.2012.10.059 ↗
25. A review on the correlation between microstructure, heat treatment and mechanical properties of additively manufactured AlSi10Mg by LPBF10.1080/10408436.2024.2414012 ↗
26. Selective laser melting of AlSi10Mg alloy: process optimisation and mechanical properties development10.1016/j.matdes.2014.09.044 ↗
27. Microstructure and mechanical properties of AlSi10Mg parts produced by laser beam additive manufacturing technology10.1007/s13632-014-0168-y ↗
28. Recent advances in the AlSi10Mg materials fabrication by selective laser melting: process parameters, optimization, low-velocity and ballistic impact responses10.1007/s40964-024-00856-x ↗
29. Processing AlSi10Mg by selective laser melting: parameter optimisation and material characterization10.1179/1743284714Y.0000000702 ↗
30. Strain rate sensitivity and fracture mechanism of AlSi10Mg parts produced by selective laser melting10.1016/j.msea.2016.11.070 ↗
31. Impact behavior of AlSi10Mg porous structures with varying single-unit cell rotation angles fabricated via laser powder bed fusion10.36922/MSAM025130019 ↗
32. Very high-cycle fatigue properties and microstructural damage mechanisms of selective laser melted AlSi10Mg alloy10.1016/j.ijfatigue.2019.02.040 ↗
33. Fatigue behavior of additively manufactured AlSi10Mg alloy under extreme environment for space applications10.1007/s11665-025-12781-3 ↗
34. A review on additively manufactured AlSi10Mg alloy: mechanical, tribological, and microstructure properties10.18311/jmmf/2025/46621 ↗
35. Effect of Zr and Sc additions on coarsening and creep resistance of AlSi10Mg fabricated by laser powder bed fusion10.1016/j.addma.2025.104707 ↗
36. High-rate characterization of L-PBF AlSi10Mg under impact conditions10.1007/s40870-024-00435-9 ↗
37. Manufacturing parameters’ effects on the flexural properties of 3D-printed PLA10.1515/mt-2024-0371 ↗
38. Experimental optimization on mechanical properties of 18Ni-300 maraging steel produced by direct metal laser sintering10.1088/2631-8695/acbd8a ↗
39. Influence of process parameters on microstructure and interfacial mechanical properties of Al6061/AlSi10Mg multi-material components fabricated via laser powder bed fusion10.1016/j.msea.2025.148061 ↗
40. Correlative analysis of build direction and post-processing heat treatments effect on microstructural evolution, porosity, residual stresses and micro-mechanical behavior of selective laser melted AlSi10Mg alloy10.1016/j.jallcom.2025.185328 ↗
41. Influence of different build orientation and laser scan strategies on surface quality, mechanical and material characteristics of 18 Ni-300 maraging steel processed through DMLS Australian10.1080/14484846.2021.2007620 ↗
42. Influence of post-heat treatment on microstructure, texture, and mechanical properties of 18Ni-300 maraging steel fabricated by using LPBF technique10.1007/s40964-023-00530-8 ↗