journal article·2020-09-01Open access

Grain refinement and the microstructure evolution of Mg–9Al–5Ca alloy solidified under permanent magnetic stirring

Huanming Ji

Materials Research Express· Volume 7· Issue 9

Abstract

Abstract To achieve the grain refinement of the as-cast Mg–9Al–5Ca alloy and understand the microstructure evolution during the grain refinement process, the permanent magnetic stirring(PMS) was applied to the solidification process of the alloy and the water-quenched experiment was carried out. The experimental results show that, the as-cast microstructure of Mg–9Al–5Ca alloy can be refined by PMS, and the better effect of grain refinement could be obtained with the increase of stirring rate. After applied PMS, the cooling of the melt is improved and the whole solidification time of the alloy is reduced. During the solidification process with PMS, there are more dendrite fragments produced in the melt and more initial dendrite grains at mold wall detached due to the forced convection, and then the grains would gradually grow into the fine and rose-like grains, which lead to the grain refinement of the as-cast alloy.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Microstructure of Al–4.99Zr–1.1B master alloy and its grain refinement effect on AZ31 magnesium alloy10.1016/S1875-5372(15)60002-9 ↗
2. Microstructure, mechanical properties and wear performance of AZ31 matrix composites reinforced by graphene nanoplatelets (GNPs)10.1016/j.jallcom.2018.04.035 ↗
3. What is going on in magnesium alloys?10.1016/j.jmst.2017.07.019 ↗
4. Utilization of VN particles for grain refinement and mechanical properties of AZ31 magnesium alloy10.1016/j.jallcom.2018.12.124 ↗
5. Magnesium: properties—applications—potential10.1016/S0921-5093(00)01351-4 ↗
6. Recent magnesium alloy development for elevated temperature applications10.1179/095066004225010497 ↗
7. Magnesium casting technology for structural applications10.1016/j.jma.2013.02.002 ↗
8. Discussion on grain refining mechanism of AM30 alloy inoculated by MgCO310.1016/j.jma.2017.04.001 ↗
9. Influence of aluminum content on twinning and texture development of cast Mg–Al–Zn alloy during compression10.1016/j.jallcom.2014.10.096 ↗
10. Microstructures and mechanical properties of SiCp/AZ91 magnesium matrix nanocomposites processed by multidirectional forging10.1016/j.jallcom.2014.11.045 ↗
11. Preparation, characterization and wear behavior of carbon coated magnesium alloy with electroless plating nickel interlayer10.1016/j.apsusc.2014.11.151 ↗
12. Corrosion inhibition of magnesium using biocompatible Alkyd coatings incorporated by mesoporous silica nanocontainers10.1016/j.porgcoat.2014.10.015 ↗
13. A review: past, present and future of grain refining of magnesium castings10.1016/j.jma.2019.05.001 ↗
14. A study of the influence of rotating magnetic field of permanent magnets on the cylindrical melt bath10.1088/1757-899X/560/1/012030 ↗
15. Effects of different rotation speeds on microstructure, hardness and corrosion resistance of the Au–Cu alloy10.1007/s13404-017-0202-3 ↗
16. A review of permanent magnet stirring during metal solidification10.1007/s11663-017-1077-7 ↗
17. Effect of permanent magnetic stirring on the solidification microstructure and ingot quality of Al–Cu alloys10.1016/j.jmatprotec.2016.10.012 ↗
18. Solidification structure of Al–Cu and Sn–Cu–Sb Alloys obtained by casting through induction stirring using permanent magnet10.2320/matertrans.F-M2014804 ↗
19. Elaboration of semisolid alloys by means of new electromagnetic rheocasting processes10.1007/BF02651854 ↗
20. Research on AZ61 magnesium alloy by electromagnetic stirring and force field analysis
21. Thermal and microstructural analysis of an A356 aluminium alloy solidified under the effect of magnetic stirring10.1007/BF03355451 ↗
22. Effect of permanent magnet stirring on solidification of Sn–Pb alloy10.1016/j.matdes.2016.07.006 ↗
23. Influence of rotating magnetic field on solidification microstructure and tensile properties of Sn–Bi lead-free solders10.1016/j.microrel.2017.10.035 ↗
24. Fluid flow and microstructure formation in a rotating magnetic field during the directional solidification process10.1016/j.jallcom.2009.10.194 ↗