journal article·2023-06-01Open access

Measurement of the thermal properties of materials by the hot plate method considering the convection coefficient around the device

Mohameth Dia, Mactar Faye, Mamadou Salif Diallo, Vincent Sambou

Materials Research Express· Volume 10· Issue 6

Abstract

Abstract Measurement methods based on the hot plate did not consider the exchange coefficients around the device. These measurements were based on analytical solutions of the unidirectional (1D) heat conduction equation. This paper describes an experimental method to simultaneously estimate the thermal conductivity and thermal diffusivity of materials, taking into account the exchange coefficient around the device. This method is based on the measurement of the temperature at the center of a heating element inserted between two samples, with the unheated surface of the samples being kept constant. As a first step, a two-dimensional (2D) heat transfer model was solved using the finite volume method (FVM) and implemented in MATLAB ® . To validate the computational code developed with the 2D model, a comparative study was performed with the full 3D model simulated in COMSOL Multiphysics. This 2D model was then used to perform a sensitivity analysis on the different thermophysical parameters and the convection coefficient. The Levenberg–Marquardt algorithm was used to calculate the estimates. An experimental study was performed on several material samples, leading to an estimation of their thermal properties. In addition, a comparative study based on the asymmetric hot plate (AHP) method was performed, and the results obtained showed a relative error of less than 4%. Therefore, it can be concluded that the proposed model is validated to provide reliable thermophysical properties of materials.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Heat Transfer and Optimization · Phase Change Materials Research · Geothermal Energy Systems and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. AIE
2. 2022
3. Optimal control of natural ventilation as passive cooling strategy for improving the energy performance of building envelope with PCM integration10.1016/j.renene.2020.07.043 ↗
4. An overview of factors influencing thermal conductivity of building insulation materials10.1016/j.jobe.2021.102604 ↗
5. Guarded Hot-Plate (GHP) Method: Uncertainty Assessment10.1023/A:1020737900473 ↗
6. Conductivité thermique des isolants
7. Parameter estimations for measurements of thermal transport properties with the hot disk thermal constants analyzer10.1063/1.1150635 ↗
8. Dynamic plane source technique for simultaneous determination of specific heat, thermal conductivity and thermal diffusivity of metallic samples10.1088/0957-0233/2/8/007 ↗
9. Step-wise transient method10.1088/0957-0233/27/3/035601 ↗
10. Flash method of measuring the thermal diffusivity. A review10.1068/htjr119 ↗
11. Extension and optimization of a three-layer method for the estimation of thermal conductivity of super-insulating materials10.1063/1.4897507 ↗
12. An improved application of the transient hot-wire technique for the absolute accurate measurement of the thermal conductivity of pyroceram 9606 up to 420 K10.1007/s10765-007-0333-5 ↗
13. Measurement of the thermal conductivity of thin insulating anisotropic material with a stationary hot strip method10.1088/0957-0233/22/3/035705 ↗
14. Simplified estimation method for the determination of the thermal effusivity and thermal conductivity using a low cost hot strip10.1088/0957-0233/15/9/034 ↗
15. A quadrupolar complete model of the hot disc10.1088/0957-0233/18/5/009 ↗
16. Comparison of the new plane source method to the step wise transient method for thermal conductivity and diffusivity measurement10.1016/j.ijthermalsci.2021.106901 ↗
17. An extension to the dynamic plane source technique for measuring thermal conductivity, thermal diffusivity, and specific heat of dielectric solids10.1063/1.1143739 ↗
18. Improvements in the dynamic plane source method10.1007/s10765-008-0525-7 ↗
19. Contribution to the stepwise transient method10.1063/1.5047622 ↗
20. Mesure de l’effusivité thermique de matériaux solides et homogènes par une méthode de ‘sonde’ plane10.1051/jp3:1993196 ↗
21. Measurement of thermal conductivity and thermal resistance with a tiny hot plate
22. A centered hot plate method for measurement of thermal properties of thin insulating materials10.1088/0957-0233/21/3/035106 ↗
23. Transient hot plate method with two temperature measurements for thermal characterization of metals10.1088/0957-0233/17/1/012 ↗
24. Hot Plate Method with Two Simultaneous Temperature Measurements for Thermal Characterization of Building Materials10.1007/s10765-017-2217-7 ↗
25. Measurement and modelisation of the thermal conductivity of a wet composite porous medium: Laterite based bricks with millet waste additive10.1016/j.conbuildmat.2012.12.032 ↗
26. A new model based on experimental results for the thermal characterization of bricks10.1016/j.buildenv.2008.07.016 ↗
27. Miller · Method for Measuring Thermal Conductivity of Small Samples Having Very Low Thermal Conductivity · 2009 · 31
28. A passive guard for low thermal conductivity measurement of small samples by the hot plate method10.1088/1361-6501/28/1/015008 ↗
29. Flash method of determining thermal diffusivity, heat capacity, and thermal conductivity10.1063/1.1728417 ↗
30. Mesure automatique de la diffusivité thermique10.1051/rphysap:019790014011092700 ↗
31. Une nouvelle technique d’identification de la diffusivité thermique pour la méthode ≪flash ≫10.1051/rphysap:01986002103022900 ↗
32. Building materials thermal conductivity measurement and correlation with heat flow meter, laser flash analysis and TCi10.1007/s10973-011-1760-x ↗
33. Thermal conductivity measurement of insulating materials with a three layers device10.1016/j.ijheatmasstransfer.2008.09.017 ↗
34. Vincent · Caractérisation Thermique de Matériaux Isolants Légers Application à des Aérogels de Faible Poids Moléculaire · 2011 · 185
35. Parameter estimation in engineering and science
36. AIChE J. · 1978 · 24 · 36710.1002/aic.690240233 ↗
37. Water content dependence of the porosity, density and thermal capacity of laterite based bricks with millet waste additive10.1016/j.conbuildmat.2011.12.063 ↗
38. Hot plate method with two simultaneous temperature measurements for thermal characterization of building materials10.1007/s10765-017-2217-7 ↗
39. COMSOL Multiphysics Reference Manual · 2019 · 1742
40. A method for the solution of certain non-linear problems in least squares10.1090/qam/10666 ↗
41. An Algorithm for Least-Squares Estimation of Nonlinear Parameters10.1137/0111030 ↗