Research on microstructure and corrosion properties of 6061 aluminum alloy laser welding
Source abstract
Abstract
Abstract This paper analyzed the microstructure and properties of 6061 aluminum alloy laser weld seam, which focused on the effect of laser defocusing amount(LDA) on weld morphology, microstructure, and corrosion resistance. The microstructure and corrosion behavior were studied by scanning electron microscope (SEM), and electrochemical testing system. It indicated that corrosion behavior respectively correlated with the precipitated phase and LDA. Experiments confirmed that with the LDA set to +0.4 mm, the laser focal spot expands, and the weld seam microstructure exhibit better corrosion resistance,reaching the corrosion resistance of 63.23% of the BM. The precipitation of Mg2Si phases and the corrosion pits reduced to minimum levels by micro-galvanic corrosion. The weld width and the number of surface defects could be optimized by LDA adjustment. And the large LDA value coarsening the grain structure, dendrite spacing, and Mg2Si precipitates.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Advanced Welding Techniques Analysis · Engineering Applied Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. A comparative study on laser beam and electron beam welding of 5A06 aluminum alloy10.1088/2053-1591/ab0562 ↗
2. The effect of welding speed on mechanical and microstructural properties of 5754 Al (AlMg3) alloy joined by laser welding10.1088/2053-1591/aad3b0 ↗
3. Study on the microstructure and mechanical properties of continuous/pulsed hybrid laser shallow penetration welding joints of 6061 aluminium alloy10.1016/j.optlastec.2024.111390 ↗
4. The influence of thermal distribution on macro profile and dendrites morphology based on temperature field simulation of 6061 aluminum alloy laser welded joint10.1080/01694243.2020.1749485 ↗
5. Effect of laser power on microstructure and properties of 6061 aluminum alloy welded joint10.1007/s13632-023-00981-z ↗
6. A comparative study on microstructure and properties of pulsed laser welding and continuous laser welding of Al-25Si-4Cu-Mg high silicon aluminum alloy10.1016/j.jmapro.2021.05.064 ↗
7. Investigation of laser joining process of CFRTP and aluminum alloy10.1080/10426914.2020.1762205 ↗
8. Microstructure and mechanical properties of 6061 aluminum alloy laser-MIG hybrid welding joint10.1007/s11771-022-4954-4 ↗
9. Review and analysis of modern laser beam welding processes10.3390/ma17184657 ↗
10. Comparative study of laser swelding-brazing of aluminum alloy to galvanized steel butted joints using five different filler wires10.1016/j.optlastec.2021.107618 ↗
11. Influence of heat treatment on microstructure, mechanical and corrosion behavior of WE43 alloy fabricated by laser-beam powder bed fusion10.1088/2631-7990/acfad5 ↗
12. A study on a hybrid SERS substrates based on arrayed gold nanoparticle/graphene/copper cone cavities fabricated by a conical tip indentation10.1016/j.jmrt.2022.12.001 ↗
13. Study on microstructure evolution and properties of laser-welded joints of 6061 aluminum alloy body10.1007/s11665-025-11151-3 ↗
14. Effect of microstructure and precipitation phenomena on the mechanical behavior of AA6061-T6 aluminum alloy weld10.1007/s00170-019-03401-1 ↗
15. Effect of microstructural characteristics on high cycle fatigue properties of laser-arc hybrid welded AA6082 aluminum alloy10.1016/j.jmatprotec.2016.01.019 ↗
16. Effects of relative positioning of energy sources on weld integrity for hybrid laser arc welding10.1016/j.optlaseng.2016.01.010 ↗
17. Microstructure and porosity characteristics of 5A06 aluminum alloy joints using laser-MIG hybrid welding10.1016/j.jmapro.2018.08.011 ↗
18. Modeling of transport phenomena and solidification cracking in laser spot bead-on-plate welding of AA6063-T6 alloy. Part I—the mathematical model10.1007/s00170-014-5924-2 ↗
19. Non-equilibrium solute partitioning in a laser re-melted Al–Li–Cu alloy10.1016/j.actamat.2013.08.050 ↗
20. Removal of metal impurities by controlling columnar grain growth during directional solidification process10.1016/j.applthermaleng.2016.06.037 ↗
21. The influence of thermal distribution on macro profile and dendrites morphology based on temperature field simulation of 6061 aluminum alloy laser welded joint10.1080/01694243.2020.1749485 ↗
22. Corrosion behavior of Al6061 alloy weldment produced by friction stir welding process10.1016/j.jmrt.2015.01.007 ↗
23. Effect of laser power on hybrid laser-gas metal arc welding (GMAW) of a 6061 aluminum alloy10.3938/jkps.77.991 ↗
24. Effect of friction stirred Al-Fe-Si particles in 6061 aluminum alloy on structure and corrosion performance of MAO coating10.1016/j.surfcoat.2016.07.003 ↗
25. Corrosion behavior of aluminum 6061 alloy joined by friction stir welding and gas tungsten arc welding methods10.1016/j.matdes.2012.02.043 ↗
26. Corrosion and electrochemical behaviors of 7A09 Al–Zn–Mg–Cu alloy in chloride aqueous solution10.1016/s1003-6326(15)63869-9 ↗
27. Numerical and experimental investigation on weld formation during laser + MIG hybrid fillet welding of aluminum alloy in horizontal position10.1007/s00170-019-03372-3 ↗
28. Effect of laser power on microstructure and micro-galvanic corrosion behavior of a 6061-T6 aluminum alloy welding joints10.3390/met11010003 ↗
29. Role of intermetallic phases in localized corrosion of AA508310.1016/j.electacta.2006.12.072 ↗
30. Galvanic corrosion of laser weldments of AA6061 aluminium alloy10.1016/j.corsci.2007.04.010 ↗