journal article·2024-08-01Open access

Effect of tempering process on the mechanical properties and corrosion resistance of E690 marine steel

Zhimin Liu, Kuijun Fu, Zhen Xu, Jiaji Wang, Ming Zhao, Dong Wang

Materials Research Express· Volume 11· Issue 8

Abstract

Abstract To accurately replicate actual production and save production costs, this study examines the influence of the tempering process on the structure, mechanical properties, and corrosion resistance of E690 marine steel. Various techniques were employed to evaluate its properties, behavior, and performance, including metallurgical microscopy, scanning electron microscopy, transmission electron microscopy, electron backscatter diffraction, impact experiments, tensile tests, and electrochemical corrosion tests. The results indicate that as the tempering temperature increases, the tempering degree of the tempered martensite structure improves, the martensite strip coarsens, the size of the precipitated carbide increases, and the proportion of large-angle grain boundaries decreases. Consequently, the tensile strength and yield strength initially increase and then decrease, while the impact toughness and elongation gradually improve. At a tempering temperature of 600 °C, the steel exhibits the best overall mechanical properties, with a tensile strength of 729 MPa, yield strength of 649 MPa, and elongation of 18%. Furthermore, at a tempering temperature of 550 °C, the test steel shows an optimal corrosion resistance, with a corrosion rate of 0.03233 mm y −1 and an open-circuit potential of −0.36 V.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Galvanic corrosion of E690 offshore platform steel in a simulated marine thermocline10.3390/met14030287 ↗
2. Effects of environmental factors on corrosion behavior of E690 steel in simulated marine environment10.1007/s40195-023-01637-1 ↗
3. Effect of hydrogen charging on the corrosion behavior of E690 steel in 3.5 wt% NaCl solution10.1007/S11665-021-06473-X ↗
4. Effect of tempering on carbides and hydrogen embrittlement in E690 high strength marine structural steel10.1007/s42243-022-00745-Z ↗
5. Effects of Nb on stress corrosion cracking of various heat-affected zone microstructures of E690 steel under cathodic potential10.1007/s11665-023-07806-8 ↗
6. Effect of tempering process on microstructure and mechanical properties of E690 high strength steel10.14158/j.cnki.1001-3814.20192740 ↗
7. Effect of heat treatment on microstructure and properties of high strength and toughness E690 thick plate
8. Effect of quenching temperature on properties of Cu-containing 5Cr15MoV martensitic stainless steel10.11901/1005.3093.2021.214 ↗
9. Ti-Mo microalloyed steel during tempering Carbide precipitation behavior10.13251/j.issn.0254-6051.2019.01.043 ↗
10. Effect of critical quenching + tempering process on yield ratio of Ultra-high strength offshore steel10.14158/j.cnki.1001-3814.2018.24.038 ↗
11. Effect of Ca and Sb on the corrosion resistance of E690 steel in marine atmosphere environment10.3390/met13050826 ↗
12. Carbide in heat-treated microstructure of ultra-high strength steel Advances in evolutionary behavior research10.13228/j.boyuan.issn1001-0963.20210083 ↗
13. Effect of tempering process on microstructure and properties of ocean engineering steel E69010.13251/j.issn.0254-6051.2016.12.020 ↗
14. Characterization of precipitates in X12CrMoWVNbN10-1-1 steel during heat treatment10.1016/j.jnucmat.2014.06.018 ↗
15. Effect of tempering temperature on carbide precipitation of E690 steel10.14158/j.cnki.1001-3814.2015.04.065 ↗
16. Effect of tempering Temperature on microstructure and microhardness of E690 Marine Steel10.13374/j.issn1001-053x.2012.06.009 ↗
17. Effect of tempering temperature on microstructure and properties of 700 MPa class beam steel10.13228/j.boyuan.issn0449-749x.20230090 ↗
18. Microstructure and mechanical properties of Cu-V double alloyed 3Mn steel10.11900/0412.1961.2022.00101 ↗
19. Influence of tempering temperature on microstructure and properties of 500 MPa grade marine steel10.13228/j.boyuan.issn1001-0963.20220253 ↗
20. Yuwei · 2016
21. Ultra-high strength steel with yield strength of 1400 MPa development and application10.13228/j.boyuan.issn1003-9996.20220617 ↗