journal article·2023-10-01Open access

Constitutive equation and microstructure evolution of TiAl alloy during hot deformation

Shiwei Tian, Zhenyu Yang, Siyuan Zhang, Zhiqian Liao, Yongjun Zhang, Yonggang Yang, Yulai Chen, Haitao Jiang

Materials Research Express· Volume 10· Issue 10

Abstract

Abstract The hot deformation behavior of TiAl alloy is analyzed by combining the true stress–strain curve and microstructure analysis. The results show that the flow stress of TiAl alloy presents the characteristics of work hardening-dynamic softening, it increases with the increase of strain rate and decreases with the increase of temperature. Based on the true stress–strain curves, the flow stress of TiAl alloy under different deformation conditions is predicted by hyperbolic sinusoidal formula. In addition, the effects of deformation temperature and strain rate on the microstructure evolution of TiAl alloy are revealed. In the process of hot compression deformation, dynamic recrystallization and γ→α, β→α phase transformation occurs. During tensile deformation, TiAl alloy exhibits super-plasticity, which is mainly due to grain rotation and coordinated deformation of β phase.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Design, processing, microstructure, properties, and applications of advanced intermetallic TiAl alloys10.1002/adem.201200231 ↗
2. Design of novel β-solidifying TiAl alloys with adjustable β/B2-phase fraction and excellent hot-workability10.1002/adem.200800164 ↗
3. Characterization of hot deformation behavior of as-forged TiAl alloy10.1016/j.intermet.2014.07.010 ↗
4. A novel method to directional solidification of TiAlNb alloys by mixing binary TiAl ingot and Nb wire10.1016/j.msea.2017.01.078 ↗
5. Enhanced strength and ductility in Ti46Al4Nb1Mo alloys via boron addition10.1016/j.jmst.2021.06.037 ↗
6. High temperature oxidation resistance of TNM alloy coated with/without 8YSZ/NiCoCrAlY thermal barrier coatings10.1016/j.apsusc.2022.155704 ↗
7. Kinetic variables based constitutive model for high temperature deformation of Ti-46.5 Al–2Nb–2Cr10.1016/j.jmrt.2021.10.004 ↗
8. Hot deformation and dynamic recrystallization behavior of TiAl-based alloy10.1016/j.intermet.2019.106521 ↗
9. Oxidation resistance of TiAl alloy improved by hot-pack rolling and cyclic heat treatment
10. A study on the hot workability of a novel TNM-RE alloy (RE= Y, La, Ce)10.1088/2053-1591/acb63d ↗
11. Low-temperature superplasticity of β-stabilized Ti-43Al-9V-Y alloy sheet with bimodal γ-grain-size distribution10.1016/j.jmst.2021.03.077 ↗
12. Microstructural evolution and refinement of as-forged Ti–43Al–9V–Y alloy after quenching and tempering10.1016/j.intermet.2019.106576 ↗
13. Novel deformation mechanism of nanolamellar microstructure and its effect on mechanical properties of TiAl intermetallics10.1016/j.msea.2023.145138 ↗
14. Dynamic recrystallization mechanism and twinning behavior in hot deformation of Ti-46.5 Al-2Nb-2Cr with initial duplex microstructure10.1016/j.matchar.2023.112678 ↗
15. Investigation of the thermal shock behavior of Mo-containing TiAl Alloys10.1002/adem.202100884 ↗
16. Deformation behavior of Ti2AlNb-based alloy during dynamic compression10.1002/adem.201800281 ↗
17. A β-solidifying TiAl alloy reinforced with ultra-fine Y-rich precipitates10.1016/j.scriptamat.2020.10.010 ↗
18. Analysis and modeling of stress–strain curves in microalloyed steels based on a dislocation density evolution model10.3390/ma15196824 ↗
19. Exploration of the static softening behavior and dislocation density evolution of TA15 titanium alloy during double-pass hot compression deformation10.1016/j.jmrt.2022.02.122 ↗
20. The identification of improved Johnson-Cook constitutive model in a wide range of temperature and its application in predicting FLCs of Al–Mg–Li sheet10.1016/j.jmrt.2020.02.005 ↗
21. A comparative study on Johnson Cook, modified Zerilli–Armstrong, and Arrhenius-type constitutive models to predict compression flow behavior of SnSbCu Alloy10.3390/ma12101726 ↗
22. A comparative study on the phenomenological and artificial neural network models to predict hot deformation behavior of AlCuMgPb alloy10.1016/j.jallcom.2016.04.300 ↗
24. Effect of strain rate upon plastic flow of steel10.1063/1.1707363 ↗
25. Hot deformation behavior and constitutive modeling of fine grained Inconel 718 superalloy10.1016/j.jallcom.2017.12.265 ↗
26. Zhang · 2018
27. Microstructure and fracture toughness of a β phase containing TiAl alloy10.1016/j.intermet.2011.05.006 ↗
28. Investigation on the microstructure evolution and dynamic recrystallization mechanisms of TiAl alloy at elevated temperature10.1016/j.jmrt.2021.06.107 ↗
29. Deformation and phase transformation behaviors of a high Nb-containing TiAl alloy compressed at intermediate temperatures10.1016/j.jmst.2021.06.041 ↗
30. Dynamic recrystallization mechanism of γ and α phases during the isothermal compression of γ-TiAl alloy with duplex structure10.1016/j.jallcom.2020.156089 ↗
31. Twin and twin intersection phenomena in a creep deformed microalloyed directionally solidified high Nb containing TiAl alloy10.1016/j.jmst.2022.02.045 ↗
32. Lamellar grains distribution and plastic strain heterogeneities in TiAI cast samples. Experiments and modelling10.1051/mattech:2004008 ↗
33. Deformation structure in a Ti-24Al-11Nb alloy10.1007/BF02671934 ↗