journal article·2024-09-01Open access

Multivariate process capability analysis for evaluating metal additive manufacturing via electron beam melting

Wadea Ameen, Moath Alatefi, Abdulrahman Al-Ahmari, Murtadha Aldoukhi, Atef M Ghaleb, Abdullah Yahia Alfaify

Materials Research Express· Volume 11· Issue 9

Abstract

Abstract Electron beam melting (EBM) as one of the relatively new metal AM techniques showed promising and increasing applications. Therefore, there is a need to evaluate the quality of the EBM process using its critical quality characteristics. However, EBM and different AM process parts have many functionally or statistically correlated quality characteristics. Consequently, the quality characteristics of the EBM process should be evaluated together. Therefore, this research aims to evaluate the quality of the EBM process using a multivariate process capability index (MPCI). In this study, the dimensional accuracy in different directions is considered as a quality characteristics. The proposed methodology involves producing a large sample of small specimens of square shape using EBM technology. Three critical dimensions of the specimen in the X, Y, and Z axis are investigated as quality characteristics. The dimensions of quality characteristics are measured using a precise measurement device. The normality and stability assumptions of the collected data are investigated using skewness measure, and multivariate process control chart respectively. Then a large sample of the multivariate normal data is simulated using computer software to estimate the percent of nonconforming (PNC) from the established specification limits, which is used to estimate MPCI. Finally, the capable tolerance of the process is estimated and the sensitivity analysis of variation is investigated. The results show the capability of the EBM process under different specification limits designations. Estimating MPCI revealed that the EBM process is capable under very coarse limits only. Moreover, the sensitivity analysis showed that variation in quality characteristics data is very sensitive for MPCI estimation, especially variation in width quality characteristic.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Manufacturing Process and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Microstructure and mechanical behavior of Ti–6Al–4V produced by rapid-layer manufacturing, for biomedical applications10.1016/j.jmbbm.2008.05.004 ↗
2. Custom total knee replacement in a dog with femoral condylar bone loss10.1111/j.1532-950X.2007.00270.x ↗
3. Characterization of titanium aluminide alloy components fabricated by additive manufacturing using electron beam melting10.1016/j.actamat.2009.11.032 ↗
4. Soboyejo · 2006
5. A review on quality control in additive manufacturing10.1108/RPJ-03-2017-0048 ↗
6. Process capability analysis of a 3D printing process10.1080/09720502.2020.1721711 ↗
7. Process capability analysis of binder jetting 3D printing process for fabrication of calcium sulphate based porous bone scaffolds10.1080/14484846.2020.1842295 ↗
8. An investigation for process capability in additive manufacturing: Universitätsbibliothek Ilmenau Ilmenau
9. Feasibility and process capability of polymer additive injection molds with slide technology10.1016/j.procir.2020.03.057 ↗
10. System performance and process capability in additive manufacturing: quality control for polymer jetting10.3390/polym12061292 ↗
11. Quality control issues in 3D-printing manufacturing: a review10.1108/RPJ-02-2017-0031 ↗
12. A framework for multivariate statistical quality monitoring of additive manufacturing: fused filament fabrication process10.3390/pr11041216 ↗
13. New approach for process capability analysis using multivariate quality characteristics10.3390/app132111616 ↗
14. Review on quality control methods in metal additive manufacturing10.3390/app11041966 ↗
15. Electron beam additive manufacturing of titanium components: properties and performance10.1115/1.4025773 ↗
16. The effects of surface finish on the fatigue performance of electron beam melted Ti–6Al–4V10.1016/j.msea.2022.144050 ↗
17. Understanding the fatigue behaviour of Ti–6Al–4V manufactured via various additive processes10.1016/j.jmrt.2024.06.168 ↗
18. Evaluation of titanium alloy fabricated using electron beam melting system for dental applications10.1016/j.jmatprotec.2011.03.013 ↗
19. Optimization of electron beam melting for production of small components in biocompatible titanium grades
20. Review on powder-based electron beam additive manufacturing technology10.1051/mfreview/2014001 ↗
21. Characterization of H13 steel produced via electron beam melting10.1108/13552540410512516 ↗
22. Turbine component rapid manufacturing via electron beam melting/electrochemical machining phase I final report
23. Part 1: tolerances for linear and angular dimensions without individual tolerance indications