Experimental and numerical analysis on the utilization of combined chemical and soil binder in sandy soil stabilization for mechanical and microstructural enhancement
Source abstract
Abstract
Abstract Sandy soils are widely distributed worldwide but are often constrained in geotechnical applications due to their high permeability, low cohesion, and poor load-bearing capacity. This study evaluates the combined stabilization effect of a chemical additive (TX-95) and a soil binder (SB-95) on improving the mechanical and microstructural performance of sandy soils. Laboratory investigations, including unconfined compressive strength (UCS) and California bearing ratio (CBR) tests, were conducted with varying SB-95 contents under a constant TX-95 dosage and multiple curing periods. The results demonstrated substantial enhancement in strength, with UCS values increasing up to 893 kPa and CBR values rising from 21% to 278%. Through iterative testing, an optimal mixing and curing method was identified that maximized homogeneity and strength gain while minimizing material waste. Scanning electron microscopy revealed that the optimized process produced dense interparticle bonding through binder films and silane-based bridges, leading to a compact and cohesive soil matrix. Finite element analysis (PLAXIS 3D) further validated the experimental outcomes, showing improved stress distribution and deformation resistance of the treated subgrade. The findings confirm that the combined use of TX-95 and SB-95, coupled with the optimized preparation technique, offers an efficient stabilization strategy for sandy soils, making them suitable for durable road subgrades, embankments, and structural foundations.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Geotechnical Engineering and Soil Stabilization · Concrete and Cement Materials Research · Grouting, Rheology, and Soil Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Stabilization of pavement subgrades and base courses with lime
2. Soil stabilization principles and practice
3. Little · 1992
4. Use of microcracking to reduce shrinkage cracking in cement-treated bases10.1177/0361198105193600101 ↗
5. Evaluation of carbon emission factors in the cement industry: an emerging economy context10.3390/su152115407 ↗
6. Hardened and durability properties of concrete made with washed waste fines10.14359/51747872 ↗
7. High-density geopolymer concrete exposed to marine environment10.1002/suco.70260 ↗
8. Exploration of strength development and self-healing of concrete incorporating calcium lactate and bacillus subtilis
9. A case study on crack propagation law of cement stabilised macadam base10.1080/10298436.2018.1492135 ↗
10. Soil and environmental issues in sandy soils10.1016/j.earscirev.2020.103295 ↗
11. Factors affecting pre-failure instability of sand under plane-strain conditions10.1680/geot.9.P.111 ↗
12. Epoxy–resin–based chemical stabilization of a fine, poorly graded soil system
13. In situ soil cementation with ureolytic bacteria by surface percolation10.1016/j.ecoleng.2012.01.013 ↗
14. Stabilization of clay soils with nontraditional additives10.3141/1819b-10 ↗
15. A deep learning-based model for endorsing predictive accuracies of landslide prediction: insights into soil moisture dynamics10.1186/s40677-025-00333-9 ↗
16. Soil stabilization using proprietary liquid chemical stabilizers: sulphonated oil and a polymer10.1007/s10064-014-0667-8 ↗
17. Stabilization of collapsible soils with nanomaterials, fibers, polymers, industrial waste, and microbes: current trends10.1016/j.conbuildmat.2023.130463 ↗
18. A state-of-the-art review of polymers used in soil stabilization10.1016/j.conbuildmat.2021.124685 ↗
19. Performance of eco-friendly polymers for soil stabilization and their resistance to freeze–thaw action10.1016/j.conbuildmat.2023.131133 ↗
20. Improving mechanical properties of sand using biopolymers10.1061/(ASCE)GT.1943-5606.0000861 ↗
21. A critical review on the feasibility of synthetic polymers inclusion in enhancing the geotechnical behavior of soils10.3390/polym14225004 ↗
22. The effect of polymer‐cement stabilization on the unconfined compressive strength of liquefiable soils10.1155/2013/356214 ↗
23. Soil stabilization with cement and lime
24. Karol · 2003
25. Introduction of microbial biopolymers in soil treatment for future environmentally-friendly and sustainable geotechnical engineering10.3390/su8030251 ↗
26. The application of an eco-friendly synthetic polymer as a sandy soil stabilizer10.3390/polym15244626 ↗
27. Exploring the role of sample size on fracture growth mechanisms in intact rock: insights from 3D DEM-DFN analysis
28. Topsoil reinforcement of sandy slope for preventing erosion using water-based polyurethane soil stabilizer10.1016/j.enggeo.2019.03.003 ↗
29. Tensile behavior of polyurethane organic polymer and polypropylene fiber-reinforced sand10.3390/polym10050499 ↗
30. An experimental study on the shear behaviors of polymer-sand composite materials after immersion10.3390/polym10080924 ↗
31. Study on the permeability characteristics of polyurethane soil stabilizer reinforced sand10.1155/2017/5240186 ↗
32. Rock‐like strength enhancement of Indian desert sand using commercially available polysaccharide biopolymers10.1111/sum.12970 ↗
33. Testing the strengths of sandstone aggregates stabilized with cement and styrene–butadiene latex copolymer for road subbase applications10.1061/(ASCE)MT.1943-5533.0004250 ↗
34. Evaluation of curing method and mix design of a moisture activated polymer for sand stabilization10.1016/j.conbuildmat.2017.04.093 ↗
35. Reduction of the shrinkage–swelling potential with polymer nanocomposite stabilization10.1002/app.33642 ↗
36. Compressive and tensile behavior of polymer treated sulfate contaminated CL soil10.1007/s10706-013-9692-9 ↗
37. Stabilizing sulfate-rich high plasticity clay with moisture activated polymerization10.1016/j.enggeo.2016.07.007 ↗
38. Measured effects of liquid soil stabilizers on engineering properties of clay10.3141/1787-04 ↗
39. Effect of wet and dry conditions on strength of silty sand soils stabilized with epoxy resin polymer10.3923/jas.2010.2839.2846 ↗
40. Finite element analysis of flexible pavement with geogrids10.1016/j.proeng.2017.05.065 ↗
41. Investigation of the effect of asphalt layer and sub-base layer thicknesses on pavement surface deformation by the finite element method
42. The Influence of base layer thickness in flexible pavements10.48084/etasr.4573 ↗
43. Three-Dimensional finite element model for flexible pavement analyses based on field modulus measurements
44. Finite-element analyses of flexible pavements10.1061/(ASCE)0733-947X(1998)124:5(491) ↗
45. Finite element modelling of flexible pavements on soft soil subgrades10.1016/j.matdes.2005.12.006 ↗
46. Guidelines for the design of flexible pavements
47. Dynamic analysis and in situ validation of perpetual pavement response to vehicular loading10.3141/2087-04 ↗
48. Experimental study of Poisson’s ratio in indirect tensile test mode for asphalt mixtures10.1016/j.conbuildmat.2022.129288 ↗
49. Elastoplastic framework of relationships between CBR and Young’s modulus for granular material10.1080/14680629.2017.1347517 ↗
50. A finite element analysis for investigating the effects of moving loads on flexible pavements10.11648/j.ajtte.20240905.12 ↗