journal article·2024-12-01Open access

Microwave absorption properties in Ku-band of micro ferrite based on natural ferrite from iron sand prepared by high energy ball milling

Mashuri Mashuri, Suyatno Suyatno, Nasori Nasori, Aunurohim Aunurohim, Sunaryono Sunaryono, Frida Ulfah Ermawati

Materials Research Express· Volume 11· Issue 12

Abstract

Abstract Micro ferrite powder with magnetite phase has been successfully synthesized from iron sand using the extraction-milling method as an absorber for radar waves at the Ku-band frequency (12–18 GHz). The extraction of ferrite powder from iron sand using a strong permanent magnet. The formation of micro ferrite was carried out using a milling process with variations in time 2 h, 4 h and 6 h (hours), and milling speed 100 rpm, 150 rpm and 200 rpm. The increasing the milling speed and time causes the particle size to decrease, the average crystal size and the saturation magnetization value to decrease but the maximum Reflection Loss (RLm) value to increase in the Ku-band frequency band (12–18 GHz). Characterization of the crystalline phase, average crystal size, magnetic power, morphology of micro ferrite was carried out using XRD, VSM and SEM. The maximum Reflection Loss value is measured using the transmission line method with a VNA tool. The optimal influence of milling speed and time on radar wave absorption at a rotation speed of 150 rpm within 6 h with a saturation magnetization value of 40.60 emu g−1r−1, average crystal size of 93.95 nm, R{L}m=−30.04 dB, matching frequency ({f}m)=16. 57 GHz and in frequency band 15.95 − 17.52 GHz. Micro ferrite made from iron sand synthesized using the high energy ball milling method has the potential to be an inexpensive alternative for making microwave absorbing materials with a simpler and environmentally friendly process.
Source: crossref · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnetic Properties and Synthesis of Ferrites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. A review on electromagnetic microwave absorption properties: their materials and performance10.1016/j.jmrt.2022.07.140 ↗
2. Microwave applications of soft ferrites10.1016/S0304-8853(00)00106-2 ↗
3. Effect of high energy milling time on strutural and magnetic properties of nanocrystalline cobalt ferrite powders10.1016/j.jmmm.2013.04.015 ↗
4. Preparation of high saturation magnetic MgFe2O4 nanoparticles by microwave-assisted ball milling10.1016/j.matlet.2012.05.034 ↗
5. Effect of particle size on structural, magnetic and dielectric properties of manganese substituted nickel ferrite nanoparticles10.1016/j.jmmm.2014.11.019 ↗
6. Microwave absorption of nanosized barium ferrite particle prepared using high energy ball milling10.1016/j.powtec.2005.05.003 ↗
7. Structural and magnetic changes induced by high energy ball milling of CdFe2O410.1016/j.jmmm.2013.02.021 ↗
8. Structural, magnetic, and catalytic studies of microwave-combustion/ball-mill synthesized zinc ferrite nanoparticles10.1016/j.inoche.2022.109932 ↗
9. Purification and dissociation of raw palygorskite through wet ball milling as a carrier to enhance the microwave absorption performance of Fe3O410.1016/j.clay.2020.105915 ↗
10. Electromagnetic wave absorption properties in Ku-band of magnetic iron nitrides prepared by high energy ball milling10.1016/j.jmmm.2020.167246 ↗
11. Structure and magnetic properties of Fe4N Fe alloys produced by mechanical milling10.1016/0925-8388(94)90730-7 ↗
12. Processing of advanced materials using high-energy mechanical milling10.1016/S0079-6425(03)00034-3 ↗
13. Preparation and microwave absorbing properties in the X-band of natural ferrites from iron sands by high energy milling10.1088/2053-1591/aa68b4 ↗
14. Erbium-chromium substituted strontium hexaferrite particles: characterization of the physical and Ku-band microwave absorption properties10.1016/j.mseb.2020.114796 ↗
15. Edge selectively oxidized graphene on carbonyl iron composites for microwave absorption and radar cross-section performance at X- and Ku-band10.1016/j.jallcom.2021.161230 ↗
16. Enhanced microwave absorption properties of Zn-substituted SrW-type hexaferrite composites in the Ku-band10.1016/j.ceramint.2020.11.095 ↗
17. Microwave absorption characteristics of cobalt doped zinc spinel ferrites in Ku-band (12.4–18 GHz)10.1016/j.matpr.2022.09.612 ↗
18. Reduced graphene oxide-ferrite microcomposites based on petung bamboo (dendrocalamus asper) charcoal and iron sand as lightweight microwave absorbing materials10.1088/2053-1591/acb1a3 ↗
19. Structural, magnetic and microwave absorption properties of SrFe12O19/Ni0.6Zn0.4Fe2O4 composites prepared by one-pot solution combustion method10.1016/j.jmmm.2018.06.061 ↗
20. Design and evolution of Fe–Si–Al soft magnetic composites doped with carbonyl iron powders: overcoming the restrictive relation between permeability and core loss10.1016/j.ceramint.2024.02.274 ↗
21. Non-contact manipulation of nonmagnetic materials by using a uniform magnetic field: experiment and simulation10.1016/j.jmmm.2019.165957 ↗
22. To study the effect of laser frequency-chirp on trapped electrons in laser wakefield acceleration10.1088/1742-6596/2267/1/012097 ↗