Development of mechanical wear ability on aluminum LM grade metal matrix composite reinforced with silicon carbide, magnesium nitride and gallium nitride particles
Source abstract
Abstract
Abstract The superior mechanical and physical properties of aluminum metal matrix composites over the underlying Al alloy make them popular in a wide range of applications. The LM6, LM25, and LM4 alloys are reinforced with ceramic particles made of silicon carbide (SiC) 2% to 4%, magnesium nitride (Mg 3 N 2 ) 2% to 4%, and gallium nitride (GaN) 0.5% to 1%, despite their extreme strength and durability. The die casting process was used to create a hybrid aluminum metal matrix composite. The mechanical behavior of the created metal matrix composite (MMC) was assessed using wear and tensile tests. A material’s bonding ability, reinforcement pullout, and microcracks were discovered by SEM image analysis; its chemical composition was determined by XRD; and its thermal stability was assessed by TGA. A highest tensile strength of 258 N mm −2 was attained with the sample (LM25-3) that had 2% silicon carbide, 4% magnesium nitride, and 1% gallium nitride reinforcement. The sample (LM25-3) exhibits a minimum wear loss of 0.0011 mg m −1 at 1100 rpm with a load of 5 kg. A temperature before 400 °C, the thermal residual mass vary from 97.7% to 91.3%, while 54% to 32% was consistently found above 800 °C in all samples.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Sustainable tribology for reliability and efficiency10.1177/13506501231169548 ↗
2. An overview of the effect of stirrer design on the mechanical properties of aluminium alloy matrix composites fabricated by stir casting
3. Manufacturing of polymer/metal composites by fused deposition modeling process with polyethylene10.1002/app.48717 ↗
4. Wearable self-powered electrochemical devices for continuous health management10.1002/adfm.202107042 ↗
5. Stir casting process simulation by computational fluid dynamics for uniform nano particles distribution in Al semi solid metal10.1088/1757-899X/377/1/012191 ↗
6. Tensile and Wear Behaviour of in situ Al-7Si/TiB2 Particulate Composites10.1016/j.wear.2007.09.007 ↗
7. Study of abrasive and erosive wear behavior of Al 6063/TiB2 in situ composites10.1016/j.msea.2008.09.003 ↗
8. Dry sliding wear behaviour of Al6061–5%SiC—TiB2 hybrid metal matrix composites synthesized by stir casting process10.1088/2053-1591/abd19b ↗
9. Evaluation of microstructure, mechanical and wear properties of aluminium reinforced with boron carbide nano composite10.17485/ijst/2016/v9i20/84294 ↗
10. Analysis of boron carbide aluminum matrix composites10.1177/0021998308097731 ↗
11. Experimental investigation of WE43 (T6) magnesium metal matrix composites to enhance mechanical properties and EDM process parameters10.1016/j.ijoes.2024.100553 ↗
12. Experimental analysis of sugarcane and coconut shell fibre impregnated with glassfiber composite for aircraft application10.1016/j.matpr.2024.04.074 ↗
13. Fabrication and study on mechanical properties and fracture behavior of nanometric Al2O3 particle-reinforced A356 composites focusing on the parameters of vortex method10.1016/j.matdes.2012.10.008 ↗
14. Investigation of the mechanical properties of a squeeze-cast LM6 aluminium alloy reinforced with a zinc-coated steel-wire mesh10.17222/mit.2017.019 ↗
15. Mechanical properties of squeeze-cast A356 composites reinforced with B4C particulates10.1007/s11665-011-9867-6 ↗
16. Sliding wear of LM25 aluminium alloy with 7.5% SiC+2.5% TiO2 and 2.5% SiC+7.5% TiO2 hybrid composites10.1177/0021998313496592 ↗
17. Investigation on mechanical, tribological and microstructural properties of Al–Mg–Si–T6/SiC/muscovite-hybrid metal-matrix composites for high strength applications10.1016/j.jmrt.2021.03.095 ↗
18. Effect of Cu addition on microstructure and corrosion behavior of Al–15Mg2Si composite10.1515/mt-2023-0217 ↗
19. Effect of mechanical properties on multi axially forged LM4 aluminium alloy10.1016/j.matpr.2020.04.465 ↗
20. Influence of hybrid pin profile on enhancing microstructure and mechanical properties of AA5052/SiC surface composites fabricated via friction stir processing10.1080/00084433.2022.2114124 ↗
21. Investigation of microstructural, mechanical and corrosion properties of AA7010-TiB2 in situ metal matrix composite10.1515/secm-2020-0010 ↗
22. Effect of co-addition of Sn, traces of RE and Ca on the mechanical and micro structural properties of As-cast AZ80 Alloy10.5755/j02.ms.35474 ↗
23. Thermodynamics of dilute liquid silicon alloys10.1080/00084433.2020.1771012 ↗
24. The studies on gallium nitride-based materials: a bibliometric analysis10.3390/ma16010401 ↗
25. Low-cost fabrication of tunable band gap composite indium and gallium nitrides10.1038/s41598-019-38882-3 ↗
26. Experimental study of sugarcane bagasse fiber with rice husk and wood powder polymer matrix composite10.1080/15440478.2023.2224977 ↗
27. Development and characterization of glass fiber composites impregnated with limestone powder and bagasse fiber10.1515/ipp-2023-4427 ↗
28. Evaluation of mechanical properties of aluminium alloy–alumina–boron carbide metal matrix composites10.1016/j.matdes.2014.01.068 ↗
29. Effect of rotational speed on the microstructure and mechanical properties of rotary friction welded AISI 1018/AISI 1020 asymmetrical joints10.1515/mt-2022-0188 ↗
30. Mechanical properties of silicon carbide nanowires: effect of size-dependent defect density10.1021/nl404058r ↗
31. Magnesium nitride phase formation by means of ion beam implantation technique10.1016/j.apsusc.2011.01.061 ↗
32. Aluminum gallium nitride (GAN)/GAN high electron mobility transistor-based sensors for glucose detection in exhaled breath condensate10.1177/193229681000400122 ↗
33. Effects of dosing and mechanical activation on the performance of reservoir sediment-cement composite cementitious material10.5755/j02.ms.33947 ↗
34. Tribological behaviour of aluminium hybrid metal matrix composite10.1016/j.proeng.2014.12.295 ↗
35. Processing methods and mechanical properties of aluminium matrix composites10.1155/2020/3765791 ↗
36. Effect of reinforced aluminium alloy LM30 with pure ceramic particles to evaluate hardness and wear properties10.1080/14328917.2019.1614321 ↗
37. Synthesis, microstructure and properties of TiO2 reinforced AA7075 matrix composites via stir casting route10.1088/2053-1591/ab1d3b ↗
38. Recent developments in advanced aircraft aluminium alloys10.1016/j.matdes.2013.12.002 ↗
39. Effect of mixing method and particle size on hardness and compressive strength of aluminium based metal matrix composite prepared through powder metallurgy route10.1016/j.jmrt.2022.02.094 ↗