Simulation analysis of deformation spring-back of free-form surface composite with cellular foam filling
Source abstract
Abstract
Abstract Due to the complex thermo-chemical-mechanical coupling during the curing and forming process of composite materials, spring-back is commonly observed after forming, which makes the shape of parts after curing and forming deviate from the design shape, resulting in difficult or even impossible assembly. In order to reduce the influence of the spring-back deformation on the forming, the finite element analysis software was used to analyze the curing deformation of the free-form composite part with foam filling, and the numerical simulation and analysis of the curing deformation of the complex curved parts were realized. The simulation analysis involves warping deformation under different angles and radii, which breaks through the unitary shape of previous research objects. In addition, the effect of foam on skin is also considered in the simulation process, and it is found that the shrinkage of the foam will affect the spring-back deformation of parts. Through finite element software, the spring-back simulation of multi-surface composite material after curing was carried out, and the results were compared with those obtained by digital measurement, the comparative analysis shows the effectiveness of the curing deformation prediction model in this paper.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Cellular and Composite Structures · Polymer Foaming and Composites · Elasticity and Material Modeling
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Compensating process-induced distortions of composite structures: a short communication10.1016/j.compstruct.2018.02.059 ↗
2. Analysis and control of cured deformation of fiber-reinforced thermosetting composites: a review10.1631/jzus.A1800565 ↗
3. A review of numerical simulation of cure-induced distortions and residual stresses in thermoset composites10.13801/j.cnki.fhclxb.20170105.001 ↗
4. Modelling of the spring-in phenomenon in curved parts made of a thermosetting composite10.1016/j.compositesa.2009.11.008 ↗
5. Modelling manufacturing deformations in corner sections made of composite materials10.1177/0021998313477896 ↗
6. Numerical simulation of curing deformation of resin matrix composite curved structure10.13801/j.cnki.fhclxb.20141028.004 ↗
7. Numerical simulation for curing deformation of resin matrix thermosetting composite using viscoelastic constitutive model10.13801/j.cnki.fhclxb.20170106.002 ↗
8. Study on the fabrication processing of complicated curved surface sandwich composites with foam core
9. Mechanical properties and test method for foam core sandwich structure10.3969/j.issn.1003-0999.2005.02.001 ↗
10. Application of polymethacrylimide(PMI) foam cored sandwich structure in aerospace industry10.3969/j.issn.1007-2330.2011.02.005 ↗
11. Weighting Analysis of Factors of Spring-Back for C-Shaped Composite Spars10.16080/j.issn1671-833x.2017.07.072 ↗
12. Experimental and numerical study of the spring-in of angled brackets manufactured using different resins and fiber textiles10.1177/0021998319855423 ↗
13. Experimental and numerical study of the effect of cure cycle, tool surface, geometry, and lay-up on the dimensional fidelity of autoclave-processed composite parts10.1016/S1359-835X(01)00123-3 ↗
14. Process-induced residual stress analysis of AS4/3501-6 composite material10.1080/10759419808945897 ↗
15. Prediction of shape distortions Part I. FE-implementation of a path dependent constitutive model10.1016/j.compositesa.2004.02.005 ↗
16. Role of tool-part interaction in process-induced warpage of autoclave-manufactured composite structures10.1016/j.compositesa.2010.04.017 ↗
17. The generation of geometrical deformations due to tool/part interaction in the manufacture on composite components10.1016/S1359-835X(04)00150-2 ↗
18. Twordimensional cure simulation of thick thermosetting composites10.1177/002199839102500302 ↗
19. Constitutive modeling of the viscoelastic mechanical response of foam rubber-like materials10.1039/C5RA03116H ↗
20. Zhong · 2007
21. Distribution of interfacial temperature shear stress of sandwich structures with FRP skins and foam core10.14136/j.cnki.issn 1673-2812.2016.05.014 ↗
22. Yuanming · 2017
23. Xinjun · 2019
24. Lei · 2017