journal article·2019-06-12Open access

Evaluation of the particle geometry and interphase influence on the filler-matrix debonding process

E Pérez, B Lauke

Materials Research Express· Volume 6· Issue 8

Abstract

Incorporation of rigid fillers into polymer matrices represents a widely used technique to obtain improved performance. The mechanical behavior finally obtained is closely related to a wide range of involved factors (filler type and size, internal structure, filler-matrix interaction, among others) and to activated dissipative mechanisms (debonding, plastic void growth, crazing, matrix yielding, etc). In this work, a debonding strength approach was applied for rigid particles (spherical, elliptical and fiber) surrounded by an interphase. The effect of interphase mechanical properties and thickness on the debonding process was investigated. The obtained results suggested a significant influence of the transition rigidity. In general, stiffer interphases promoted higher critical strength values. On the other hand, particle surrounded by a softer transition region displayed higher dissipated energy for all examined particle, except for spheres.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Polymer crystallization and properties · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. 10.1016/j.jiec.2008.06.01110.1016/j.jiec.2008.06.011 ↗
2. 10.1016/j.compscitech.2009.06.02010.1016/j.compscitech.2009.06.020 ↗
3. 10.1016/j.compositesb.2008.01.00210.1016/j.compositesb.2008.01.002 ↗
4. 10.1016/j.polymer.2004.02.06410.1016/j.polymer.2004.02.064 ↗
5. 10.1016/j.engfracmech.2006.12.02310.1016/j.engfracmech.2006.12.023 ↗
6. 10.1016/j.compscitech.2009.12.02410.1016/j.compscitech.2009.12.024 ↗
7. 10.1016/j.polymer.2011.03.05510.1016/j.polymer.2011.03.055 ↗
8. 10.1016/j.ijsolstr.2013.05.02410.1016/j.ijsolstr.2013.05.024 ↗
9. 10.1016/j.compscitech.2008.09.01110.1016/j.compscitech.2008.09.011 ↗
10. 10.1016/j.compscitech.2015.11.02710.1016/j.compscitech.2015.11.027 ↗
11. 10.1016/j.eurpolymj.2004.10.03510.1016/j.eurpolymj.2004.10.035 ↗
12. 10.1016/j.progpolymsci.2011.12.00510.1016/j.progpolymsci.2011.12.005 ↗
13. 10.1016/j.polymer.2005.12.01410.1016/j.polymer.2005.12.014 ↗
14. 10.1016/j.compscitech.2013.11.01510.1016/j.compscitech.2013.11.015 ↗
15. 10.1016/j.compscitech.2011.09.01610.1016/j.compscitech.2011.09.016 ↗
16. 10.1016/j.tafmec.2015.07.00910.1016/j.tafmec.2015.07.009 ↗
17. 10.1016/j.compscitech.2013.12.02010.1016/j.compscitech.2013.12.020 ↗
18. 10.1016/j.compositesb.2011.12.01210.1016/j.compositesb.2011.12.012 ↗
19. 10.1016/S0997-7538(01)01184-610.1016/S0997-7538(01)01184-6 ↗
20. 10.1016/j.compscitech.2007.05.02010.1016/j.compscitech.2007.05.020 ↗
21. 10.1016/j.compstruct.2017.02.02010.1016/j.compstruct.2017.02.020 ↗
22. 10.1016/j.compositesb.2018.10.03210.1016/j.compositesb.2018.10.032 ↗
23. 10.1002/pc.2436810.1002/pc.24368 ↗
24. 10.1016/j.engfracmech.2018.04.03310.1016/j.engfracmech.2018.04.033 ↗
25. 10.1016/j.polymer.2018.07.03110.1016/j.polymer.2018.07.031 ↗
26. 10.1016/j.addr.2016.04.00310.1016/j.addr.2016.04.003 ↗
27. 10.1016/j.compositesb.2013.03.03510.1016/j.compositesb.2013.03.035 ↗
28. 10.1016/S0266-3538(02)00212-910.1016/S0266-3538(02)00212-9 ↗
29. 10.1016/j.addma.2018.11.00810.1016/j.addma.2018.11.008 ↗
30. 10.1016/j.compscitech.2019.04.00610.1016/j.compscitech.2019.04.006 ↗
31. 10.3390/ma1105073210.3390/ma11050732 ↗
32. 10.1016/j.compositesb.2016.10.04310.1016/j.compositesb.2016.10.043 ↗