journal article·2022-10-01Open access

Enhancement of infrared shielding property of SnO2 using Sb as a dopant

Towseef Ahmad, Mohd Zubair Ansari

Materials Research Express· Volume 9· Issue 10

Abstract

Abstract Transparent conducting oxides (TCO) are essential to the operation of advanced energy harvesting and storage devices, as well as display technology. Doped tin oxide (SnO2) exhibits enhanced optical and thermal characteristics in comparison to undoped SnO2. In this article, the cost-effective sol-gel methodology was employed in the synthesis of tin oxide (SnO2) and antimony (Sb) doped tin oxide nanoparticles. According to the XRD analysis, the tetragonal structure was maintained despite the apparent reduction in crystal size as the amount of Sb increased. In the study, the effect that Sb doping has on absorption and reflection in the visible and near-infrared regions was analyzed. The band gap of the nanoparticles was observed to broaden as the concentration of Sb doping was increased from 3.44 eV (ATO-0) to 4.62 eV (ATO-6). The results from UV–vis-NIR spectra demonstrated that the ATO films efficiently reduced the amount of infrared light that passed through them. The results of the heat-insulation test showed that ATO-coated glass outperformed uncoated glass in terms of heat insulation. Because of these characteristics, ATO could be a good replacement material, especially for solar cells and smart windows.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Transition Metal Oxide Nanomaterials · Gas Sensing Nanomaterials and Sensors · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Effect of quantity of spraying solution on the properties of spray deposited fluorine doped tin oxide thin films10.1016/j.physb.2009.03.006 ↗
2. Recent status of chemical bath deposited metal chalcogenide and metal oxide thin films10.1016/j.cap.2010.07.007 ↗
3. Direct access to thermally stable and highly crystalline mesoporous transition-metal oxides with uniform pores10.1038/nmat2111 ↗
4. Electrochromics for smart windows: oxide-based thin films and devices10.1016/j.tsf.2014.02.002 ↗
5. Structural, morphological and opto-electrical properties of transparent conducting SnO2 thin films : influence of Sb doping10.1080/14328917.2020.1801272 ↗
6. Overview on transparent conducting oxides and state of the art of low-cost doped Zno systems
7. Effect of dopant elements on structure and morphology of SnO2 nanoparticles10.1007/s41779-019-00344-4 ↗
8. Properties of Sb-doped SnO2 transparent conductive thin films deposited by radio-frequency magnetron sputtering10.1016/j.tsf.2013.06.077 ↗
9. Influences of defects and Sb valence states on the temperature dependent conductivity of Sb doped SnO2 thin films10.1016/j.physleta.2015.06.033 ↗
10. Electrical properties of bulk and interface layers in Sb doped SnO2 thin films10.1016/j.ceramint.2018.10.131 ↗
11. Ultrasonic spray pyrolysis of antimony-doped Tin oxide transparent conductive10.1002/admi.202000655 ↗
12. High mobility in nanocrystal-based transparent conducting oxide thin films10.1021/acsnano.7b06783 ↗
13. Transparent conducting Sb-doped SnO2 thin films grown by pulsed laser deposition10.1016/j.jnoncrysol.2012.09.009 ↗
14. Effects of Sb doping on the structure and properties of SnO2 films10.1016/j.cap.2020.01.009 ↗
15. Sb-doped SnO2 nanoparticles synthesized by sonochemical-assisted precipitation process10.1166/jnn.2015.10222 ↗
16. Preparation and characterization of Sb-doped SnO2 ( ATO ) nanoparticles with NIR shielding by an oxidation coprecipitation hydrothermal method10.1080/01932691.2019.1645020 ↗
17. Effect of SnO2 and Sb doped SnO2 on the structure and electrical conductivity of epichlorohydrin rubber morphological analysis of particles10.1002/pc.23423 ↗
18. Superlattices and Microstructures Impedance studies of Sb doped SnO2 thin film prepared by sol gel process10.1016/j.spmi.2011.08.009 ↗
19. Substantial corrosion resistance improvement in heat-treated Mg e Gd e Zn alloys with a long period stacking ordered structure10.1016/j.matchemphys.2017.09.035 ↗
20. Microencapsulated phase change materials with TiO2-doped PMMA shell for thermal energy storage and UV-shielding10.1016/j.solmat.2017.04.014 ↗
21. Effect of pH and annealing temperature on the properties of tin oxide nanoparticles prepared by sol—gel method10.1007/s10854-017-7959-2 ↗
22. Synthesis and characterization of Sb doped SnO2 for the photovoltaic applications: different route10.1088/2053-1591/ab82c6 ↗
23. The scherrer formula for x-ray particle size determination10.1103/PhysRev.56.978 ↗
24. Effect of thickness on the electrical and optical properties of Sb doped SnO2 (ATO) thin films10.1007/s10832-004-5093-z ↗
25. Doping-dependent negative dielectric permittivity realized in mono-phase antimony tin oxide ceramics10.1039/D0TC02266G ↗
26. Effect of intrinsic strain on the optical band gap of single phase nanostructured Cu2ZnSnS410.1016/j.mssp.2017.02.011 ↗
27. Applied Surface Science Microstructure and physical properties of sol gel derived SnO2 : Sb thin films for optoelectronic applications10.1016/j.apsusc.2013.02.109 ↗
28. Structural and optical properties of CZTS thin films deposited by ultrasonically assisted chemical vapour deposition10.1088/0022-3727/47/18/185101 ↗
29. Structural and optoelectrical properties of nanostructured LiNiO2 thin films grown by spray pyrolysis technique10.1016/j.jallcom.2017.02.106 ↗
30. Impact of crystalline defects and size on x-ray line broadening: A phenomenological approach for tetragonal SnO2 nanocrystals10.1063/1.4921452 ↗
31. Intrinsic strain dependent redshift in optical band gap of Cu2ZnSnS4 nanostructured thin films10.1016/j.tsf.2018.05.003 ↗
32. Properties of ( 200 ) oriented , highly conductive SnO2 thin fi lms by chemical spray pyrolysis from non-aqueous medium : Effect of antimony doping10.1016/j.jallcom.2015.08.197 ↗
33. The effect of solvents on the growth and key properties of tin oxide thin films deposited via chemical spray pyrolysis10.1016/j.matchemphys.2020.124209 ↗
34. Influence of texture coefficient on surface morphology and sensing properties of W-doped nanocrystalline tin oxide thin films10.1021/am507397z ↗
35. Thermal-frequency dependence study of the sub-band localized states effect in Sb-doped SnO2 based sol-gel thin films10.1016/j.tsf.2017.02.060 ↗
36. The FTIR studies of SnO2:Sb(ATO) films deposited by spray pyrolysis10.1016/j.matlet.2011.01.052 ↗
37. Structural, ultrasonic and spectroscopic studies of tin oxide thin films; effect of Ir and (Ni, Ir) double doping10.1088/2053-1591/aac80a ↗
38. Synthesis and characterization of antimony doped tin oxide aerogel nanoparticles using a facile sol—gel method10.1007/s10854-017-7965-4 ↗
39. Optical characterization of ZnO nanoparticles capped with various surfactants10.1016/j.jlumin.2008.11.021 ↗
40. Fabrication of highly transparent and conductive indium-tin oxide thin films with a high figure of merit via solution processing10.1021/la4033282 ↗
41. Enhanced electrical properties of antimony doped tin oxide thin films deposited via aerosol assisted chemical vapour deposition10.1039/c8tc01929k ↗
42. Influence of Sb doping on the structural and optical properties of tin oxide nanocrystals10.1039/C3CE40241J ↗
43. Sb-doped SnO2 ( ATO ) hollow submicron spheres for solar heat insulation coating10.1016/j.ceramint.2020.08.162 ↗
44. Assessing Tauc plot slope quantification: ZnO thin films as a model system10.1002/pssb.201700393 ↗
45. Evaluation of the Tauc method for optical absorption edge determination: ZnO thin films as a model system10.1002/pssb.201552007 ↗
46. Structure and luminescent properties of electrodeposited Eu3+-doped CaF2 thin films10.1016/j.tsf.2014.04.019 ↗
47. Determination of energy band gap of nanocrystalline SbSI using diffuse reflectance spectroscopy10.1063/1.3103603 ↗
48. How to correctly determine the band gap energy of modified semiconductor photocatalysts based on UV–vis spectra10.1021/acs.jpclett.8b02892 ↗
49. Band-gap energy estimation from diffuse reflectance measurements on sol-gel and commercial TiO2: a comparative study10.1007/s10971-011-2582-9 ↗
50. Anisotropic optical properties of highly doped rutile SnO2 : Valence band contributions to the Burstein-Moss shift10.1063/1.5054351 ↗
51. Synthesis of Cu2ZnSnS4 nanoparticles by solvothermal route10.1063/1.4948096 ↗
52. Sun · Effects of Sb doping on the structure and properties of SnO2 films · 2020 · 20 · 46210.1016/j.cap.2020.01.009 ↗