journal article·2024-09-01Open access

Microstructure and mechanical properties of TiC reinforced NbC-Ni4VC4Mo2C cermets

Asad Malik, Abdul Basit, Muhammad Farzik Ijaz, Furqan Anwar, Malik Adeel Umer, Yang Shao

Materials Research Express· Volume 11· Issue 9

Abstract

Abstract The class of NbC-Ni cermets has emerged as a promising environmentally friendly alternative to WC-Co cemented carbide tools, although some inherent properties i.e. room temperature hardness and flexural strength, of NbC-Ni cermets may require further enhancements. To enhance the properties of NbC-Ni cermets, diverse methodologies were applied, including grain inhibition and the strengthening of the cermet through the use of reinforcements. This study systematically examined the impact of TiC additions, specifically at 10% and 20%, on both the microstructure and mechanical properties of NbC-12Ni-4VC-4Mo2C cermets. NbC-12Ni cermets were fabricated via vacuum liquid phase sintering (LPS) at 1400 °C and 1450 °C. Enhancements by incorporating 4% VC and 4% Mo2C, followed by TiC at 10% and 20% concentrations to the NbC-Ni-4VC4Mo2C cermet were made. XRD and SEM results confirm the formation of (Nb, X, Y) C solid solution cubic FCC carbides. Significant grain refinement was evident in the cermet samples, subjected to grain inhibition. The observed grain sizes ranged from a maximum of 6.84 μm (in NbC12Ni) to a minimum of 2.154 μm (in the sample containing 20% TiC) at 1450 °C. The incorporation of 20TiC at 1450 °C led to a remarkable 26.5% enhancement in average hardness compared to NbC-Ni cermet, and a 4.2% improvement over the 4VC4Mo2C cermet. At 1450 °C, 20TiC reinforcement led to an average fracture toughness of 9.331 MPa√m, representing a 4.56% improvement over the 4VC4Mo2C cermet. However, there was a marginal reduction in toughness compared to the NbC-Ni cermet. Moreover, the addition of TiC led to a decrease in the flexural strength of the cermets, with a maximum flexural strength of 939 N mm−2 recorded for NbC-Ni-4VC4Mo2C, representing an 11.6% increase compared to the NbC-Ni cermet.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Sintering of tungsten carbide cermets with an iron-based ternary alloy binder: processing and thermodynamic considerations10.1016/j.ijrmhm.2018.05.008 ↗
2. Effect of different binders and secondary carbides on NbC cermets10.1007/s10010-022-00583-1 ↗
3. Ti(C,n) and wc-based cermets: a review of synthesis, properties and applications in additive manufacturing10.3390/ma14226786 ↗
4. REACH - Chemicals - Environment - European Commission · 2024
5. The evaluation of the non-toxic ferrous matrix based WC reinforced composites: a review10.18466/cbayarfbe.1020170 ↗
6. Rapid sintering of ultrafine WC–Ni cermets10.1016/j.ijrmhm.2005.07.002 ↗
7. The critical raw materials in cutting tools for machining applications: a review10.3390/ma13061377 ↗
8. EIP 2021 European Commission, EIP, on Raw Materials, Raw Materials Scoreboard 2021 10.2873/33156110.2873/331561 ↗
9. Physical properties of the NbC carbide10.3390/met6100250 ↗
10. Potentials of niobium carbide (NbC) as cutting tools and for wear protection10.1016/j.ijrmhm.2018.01.009 ↗
11. Assessment of improved tribocorrosion in novel in situ Ti and β Ti–40Nb alloy matrix composites produced with NbC addition during arc-melting for biomedical applications10.1016/j.matchemphys.2023.127597 ↗
12. Unravelling microstructure of novel as-cast in situ α Ti and β Ti-Nb alloy matrix composites with NbC addition10.1016/j.matlet.2023.134794 ↗
13. HV-KIC property charts of cemented carbides: a comprehensive data collection10.1016/j.ijrmhm.2021.105763 ↗
14. Properties of NbC-Co cermets obtained by spark plasma sintering10.1016/j.matlet.2006.05.011 ↗
15. Influence of WC addition on the microstructure and mechanical properties of NbC-Co cermets10.1016/j.jallcom.2006.05.015 ↗
16. The Tribological and echanical properties of niobium carbides (NbC) bonded with cobalt or Fe3Al10.1016/j.wear.2014.09.007 ↗
17. The use of niobium carbide (NbC) as cutting tools and for wear resistant tribosystems10.1016/j.ijrmhm.2014.07.002 ↗
18. Iron aluminides as an alternative binder for cemented carbides: a review and perspective towards additive manufacturing10.1016/j.mtcomm.2022.103335 ↗
19. Cermets with Fe-alloy binder: a review10.1016/j.ijrmhm.2020.105290 ↗
20. Sintering behavior of NbC based cemented carbides bonded with M2 high speed steel10.1016/j.ceramint.2019.01.181 ↗
21. Effect of sintering temperature on microstructural evolution of M48 high speed tool steel bonded NbC matrix cemented carbides sintered in inert atmosphere10.1016/j.ijrmhm.2018.02.021 ↗
22. Stainless steel bonded NbC matrix cermets using a submicron NbC starting powder10.1016/j.ijrmhm.2016.04.021 ↗
23. Study on the microstructure and mechanical properties of microwave sintered NbC–Ni cermets reinforced by multilayer graphene10.1016/J.CERAMINT.2023.03.136 ↗
24. Sintering behavior, microstructure and mechanical properties of NbC-Ni alloys with different carbon contents10.1016/j.ijrmhm.2021.105771 ↗
25. Microstructure and mechanical properties of (Nb,W,Ti)(C,N)-Ni solid solution cermets with 6 to 20 wt% Ni10.1016/j.ijrmhm.2021.105757 ↗
26. Microstructure and mechanical properties of WC or Mo2C modified NbC-Ni cermets10.1016/j.ijrmhm.2020.105440 ↗
27. Influence of sintering condition on the tool wear of NbC-based Ni binder-cemented carbide cutting tools10.1007/s00170-019-04838-0 ↗
28. Microstructure and mechanical properties of WC modified NbC-Ni cermets
29. Effect of TiC additions on the microstructure, mechanical and tribological properties of NbC-CoCrFeNiMn high entropy alloys cermets10.1016/j.ijrmhm.2023.106141 ↗
30. Fabrication and characterization of NbC-CoCrFeNiMn high-entropy alloy cermets10.1016/j.ijrmhm.2020.105388 ↗
31. NbC grain growth control and mechanical properties of Ni bonded NbC cermets prepared by vacuum liquid phase sintering10.1016/j.ijrmhm.2017.12.013 ↗
32. Microstructure and tribological performance of NbC-Ni cermets modified by VC and Mo2C10.1016/j.ijrmhm.2017.03.012 ↗
33. Microstructure and mechanical properties of NbC matrix cermets using Ni containing metal binder10.1016/j.mprp.2016.05.009 ↗
34. Development of NbC-based hardmetals: influence of secondary carbide addition and metal binder
35. Effect of TiC content on the carbide particle growth of NbC-Ni cemented carbide10.1016/j.ijrmhm.2022.105826 ↗
36. A review on the microstructure and properties of TiC and Ti(C,N) based cermets10.1016/J.IJRMHM.2023.106320 ↗
37. High-temperature sliding wear, elastic modulus and transverse rupture strength of Ni bonded NbC and WC cermets10.1016/j.ijrmhm.2019.105143 ↗
38. Microstructural investigation and machining performance of NbC-Ti(C0.5N0.5) matrix cermets10.1016/j.ijrmhm.2019.105038 ↗
39. Niobium carbide for machining and wear protection—Evolution of properties10.1016/j.mprp.2019.02.002 ↗
40. Effect of carbon content on the microstructure and mechanical properties of NbC-Ni based cermets10.3390/met8030178 ↗
41. Effect of Ti(C0.7N0.3) content on the microstructure and mechanical properties of ni bonded NbC-Ti(C0.7N0.3) based cermets10.4028/www.scientific.net/SSP.274.43 ↗
42. Effect of the atomic size distribution on glass forming ability of amorphous metallic alloys10.1016/S0025-5408(01)00715-2 ↗
43. Microstructural development during the liquid-phase sintering of two-phase alloys, with special reference to the NbC/Co system10.1007/BF00549730 ↗
44. Indentation fracture of WC-Co cermets10.1007/BF00555296 ↗
45. Microstructure, mechanical properties, and reinforcement mechanism of second-phase reinforced tic-based composites: a review10.3390/coatings12060801 ↗