journal article·2019-09-13

Effect of quenching temperature on the microstructure and mechanical properties of 30MnBNbV hot stamping steel

Weijian Chen, Shuai Wang, Zhengzhi Zhao, Jiangtao Liang, Jie Guo

Materials Research Express· Volume 6· Issue 10
Publisher page

Abstract

A low carbon steel microalloyed with Nb-V subjected to hot stamping process, then quenching to different temperatures (30 °C, 230 °C, 300 °C) followed by air cooling to room temperature was investigated. The method in this article was significantly simplified compared with the conventional quenching & tempering (QT) process. The results shown that the best comprehensive mechanical properties could be obtained at 230 °C. The yield strength (YS) and ultimate tensile strength (UTS) were 1128.8 MPa and 1768.8 MPa respectively, and the total elongation was 8.8% without much compromise. The excellent properties were attributed to a multi-morphology microstructure which consisted of large amount of martensite (block fresh martensite and lath tempered martensite) and trace carbon-enriched retained austenite. In addition, the recovery of block fresh martensite (FM) and decomposition of unstable austenite were discussed during air cooling to room temperature process.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. 10.1126/science.aan017710.1126/science.aan0177 ↗
2. 10.1016/j.actamat.2012.03.00610.1016/j.actamat.2012.03.006 ↗
3. 10.1126/science.aal276610.1126/science.aal2766 ↗
4. 10.1016/j.msea.2014.04.05310.1016/j.msea.2014.04.053 ↗
5. 10.1016/j.cirp.2017.05.00710.1016/j.cirp.2017.05.007 ↗
6. 10.1016/j.msea.2014.11.00510.1016/j.msea.2014.11.005 ↗
7. 10.1016/j.msea.2014.12.05110.1016/j.msea.2014.12.051 ↗
8. 10.1007/s12613-018-1638-z10.1007/s12613-018-1638-z ↗
9. 10.1080/02670836.2018.152586010.1080/02670836.2018.1525860 ↗
10. 10.13374/j.issn1001-053x.2013.09.00710.13374/j.issn1001-053x.2013.09.007 ↗
11. 10.13374/j.issn1001-053x.2010.09.00810.13374/j.issn1001-053x.2010.09.008 ↗
12. 10.1002/srin.20170055210.1002/srin.201700552 ↗
13. 10.1002/srin.20170038910.1002/srin.201700389 ↗
14. 10.1016/j.msea.2014.06.09010.1016/j.msea.2014.06.090 ↗
15. 10.1016/j.actamat.2005.08.01710.1016/j.actamat.2005.08.017 ↗
16. 10.1016/j.msea.2015.08.01610.1016/j.msea.2015.08.016 ↗
17. 10.1016/j.msea.2015.01.00610.1016/j.msea.2015.01.006 ↗
18. 10.1016/j.jallcom.2016.08.09310.1016/j.jallcom.2016.08.093 ↗
19. 10.1016/j.matdes.2016.12.06510.1016/j.matdes.2016.12.065 ↗
20. 10.1016/j.actamat.2011.06.01410.1016/j.actamat.2011.06.014 ↗
21. 10.1016/j.msea.2014.07.05410.1016/j.msea.2014.07.054 ↗
22. 10.1016/j.actamat.2016.04.04810.1016/j.actamat.2016.04.048 ↗
23. 10.1111/j.1365-2818.2009.03275.x10.1111/j.1365-2818.2009.03275.x ↗
24. 10.1016/j.matdes.2013.03.01910.1016/j.matdes.2013.03.019 ↗
25. 10.1179/174328406X13094810.1179/174328406X130948 ↗
26. 10.1016/j.msea.2018.08.02710.1016/j.msea.2018.08.027 ↗
27. 10.1016/j.actamat.2005.11.00110.1016/j.actamat.2005.11.001 ↗
28. 10.1016/j.actamat.2007.08.05110.1016/j.actamat.2007.08.051 ↗
29. Liu Q D · Acta Metall Sin · 2009 · 45 · 1281
30. 10.106/j.jallcom.2009.07.12210.106/j.jallcom.2009.07.122 ↗
31. Liu Q D · Acta Metall Sin · 2009 · 45 · 1297
32. 10.2355/isijinternational.47.136310.2355/isijinternational.47.1363 ↗