journal article·2024-01-01Open access

Experimental study of the effect of the concentration of water/polyalkylene glycol solutions on heat transfer in steels subjected to quenching

Brandon Farrera Buenrostro, Constantin Alberto Hernández Bocanegra, José Angel Ramos Banderas, Luis Enrique Molina Valdovinos, Nancy Margarita López Granados, Sami Vapalahti

Materials Research Express· Volume 11· Issue 1

Abstract

Abstract In this work, the heat transfer coefficients were determined utilizing an experimental study for cooling a 15B35H boron steel, using aqueous solutions of polyalkylene glycol (PAG) as a cooling fluid. A cooling tank was designed and built to allow the fluid recirculation, where the effect of agitation and the PAG content in a concentration range of 2%–6% vol. were analyzed. The thermal histories of cylindrical probes instrumented with K-type thermocouples were obtained, and the heat transfer coefficients associated with the types of refrigeration were calculated, solving the IHCP. The results show the presence of two maximum surface heat flux denominated q1max for the low-temperature range and q2max for the high-temperature range. Getting higher q1max and low q2max is desirable to avoid distortion and cracking. It was found that 4% PAG exhibits a slight variation of heat flux values in both low and high-temperature regions, regardless of the degree of agitation, maintaining values of about 3 MW·m−2 for q1max and 5.5 MW·m−2 for q2max. In this case, q2max is higher than q1max, leading to higher cooling rates in the martensitic transformation zone, increasing the risk of distortion and cracking. In the cases of 2 y 6% PAG, agitation affects q1max ranging from 2.5 to 6 MW·m−2, and for q2max from 4 to 6 MW·m−2, where q1max is always higher than q2max, providing better conditions for quenching.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Heat Transfer and Optimization · Heat Transfer Mechanisms · Heat Transfer and Boiling Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Soni · Exp. Therm Fluid Sci. · 2023 · 14410.1016/j.expthermflusci.2023.110865 ↗
2. Chen · International J. of Heat and Mass Trans. · 2017 · 109 · 20910.1016/j.ijheatmasstransfer.2017.02.013 ↗
3. Kobasko · EUREKA: Phys. and Eng. · 2017 · 2 · 5510.21303/2461-4262.2017.00294 ↗
4. Kobasko · American J. of Mod. Phys. · 2019 · 8 · 7610.11648/j.ajmp.20190806.11 ↗
5. Mathews · Transactions of the Indian Inst. of Metals · 2019 · 72 · 140510.1007/s12666-018-1542-2 ↗
6. Kobasko · Met. Sci. and Heat Treat. · 1985 · 27 · 63910.1007/BF00701054 ↗
7. Ikkene · J. of Mater. Eng. and Perform. · 2014 · 23 · 381910.1007/s11665-014-1185-3 ↗
8. Momoh · Niger. J. Technol. Dev. · 2015 · 12 · 61
9. Ramesh · Metall. Mater. Trans. · 2016 · 47 · 85910.1007/s11663-015-0541-5 ↗
10. Banerjee · IJSTE · 2018 · 5 · 118
11. The effect of polymeric quenching media on mechanical properties of medium carbon steel
12. User’s manual for CONTA: program for calculating surface heat fluxes from transient temperatures inside solids
13. Beck · International J. of Heat and Mass Transf. · 1996 · 39 · 364910.1016/0017-9310(96)00034-8 ↗
14. Hernandez-Morales · J. of Mater. Eng. and Perform. · 1992 · 1 · 76310.1007/BF02658259 ↗
15. Chandler · Materials Park, OH: ASM International, VII · 1995
16. Quenching and quenching technology
17. Barrena-Rodríguez · Metals · 2021 · 11 · 97410.3390/met11060974 ↗
18. Totten · 2000