journal article·2025-11-01Open access

Development of hybrid materials from polypropylene and electronic waste plastics: characterization and potential application

Giovanni Savini, Philipe A P Silva, Virginia S T Ciminelli, Daniel Majuste, Rodrigo L Oréfice

Materials Research Express· Volume 12· Issue 11

Abstract

Abstract The growing volume of electronic waste (e-waste) poses a significant environmental challenge, demanding innovative recycling solutions. This study investigates the feasibility of incorporating monitor cabinet scraps (CS) from liquid crystal display (LCD) as a partial substitute for virgin polypropylene (PP), with the goal of developing sustainable and low-cost materials. PP/CS blends were prepared by melt mixing and injection molding. Morphological and rheological analyses revealed phase segregation and the amorphous nature of the CS, while thermal analysis indicated a reduction in PP’s crystallinity at high CS concentrations. Mechanical tests demonstrated that both composition and processing method critically influence the material’s performance. Notably, the direct injection molding of a blend with 10% CS resulted in a balanced set of properties, highlighting the potential for creating useful and environmentally friendly materials. This sample presented mechanical properties statistically equal to virgin PP. This approach not only offers a practical solution for recycling e-waste, in alignment with the principles of the circular economy, but also opens up new opportunities for producing value-added composite materials for industrial applications, thereby reducing environmental impact and production costs.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Recycling and Waste Management Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Baldé · 2024
2. Challenges and opportunities in the management of electronic waste and its impact on human health and environment10.3390/su15031837 ↗
3. Environmental impacts and benefits of state-of-the-art technologies for E-waste management10.1016/j.wasman.2017.06.038 ↗
4. E-waste recycling and resource recovery: a review on technologies, barriers and enablers with a focus on oceania10.3390/met11081313 ↗
5. Systematic quantification of waste compositions: a case study for waste of electric and electronic equipment plastics in the European union10.3390/su14127054 ↗
6. Composition of plastics from waste electrical and electronic equipment (WEEE) by direct sampling10.1016/j.wasman.2012.02.010 ↗
7. Recycling potential for non-valorized plastic fractions from electrical and electronic waste10.3390/recycling6020033 ↗
8. Forecasting waste compositions: a case study on plastic waste of electronic display housings10.1016/j.wasman.2015.09.019 ↗
9. A review on the applicability of life cycle assessment to evaluate the technical and environmental properties of waste electrical and electronic equipment10.1007/s10924-020-01966-7 ↗
10. Fire resistance and thermal performance of hybrid fibre-reinforced magnesium oxychloride cement-based composites10.1016/j.conbuildmat.2025.140867 ↗
11. Enhanced mechanical and axial resilience of recycled plastic aggregate concrete reinforced with silica fume and fibers10.1007/s41062-024-01803-z ↗
12. E-waste in concrete construction: recycling, applications, and impact on mechanical, durability, and thermal properties–a review10.1007/s41062-025-02038-2 ↗
13. Compatibilized PC/ABS blends from solvent recycled PC and ABS polymers from electronic equipment waste10.1016/j.polymertesting.2023.107969 ↗
14. ASTM-D256-18 · 2018
15. ASTM-D638-14 · 2014
16. Material recycling of acrylonitrile butadiene styrene (ABS) from toy waste using density separation and safer solvents10.1016/j.resconrec.2023.107090 ↗
17. Morphology and properties of polypropylene/ethylene vinyl acetate copolymer/wood powder blend composites10.3144/expresspolymlett.2009.24 ↗
18. The influence of loading rate and concurrent microstructural evolution in micrometric talc- and wollastonite-reinforced high isotactic polypropylene composites10.1016/j.msea.2004.03.035 ↗
19. Processing and characterization of high density polyethylene/ethylene vinyl acetate blends with different VA contents10.1155/2012/635693 ↗
20. Effects of filler treatments on the mechanical, flow, thermal, and morphological properties of talc and calcium carbonate filled polypropylene hybrid composites10.1002/app.21507 ↗
21. Talc as nucleating agent of polypropylene: morphology induced by lamellar particles addition and interface mineral-matrix modelization10.1023/A:1014929121367 ↗
22. Influence of ECAPressing temperature on crystallinity and mechanical behaviour of polypropylene and high-density polyethylene / Influência da temperatura de ECAPressing na cristalinidade e comportamento mecânico do polipropileno e do polietileno de alta densidade10.34117/bjdv8n5-318 ↗
23. Comparative study of the morphology and properties of PP/LLDPE/wood powder and MAPP/LLDPE/wood powder polymer blend composites10.3144/expresspolymlett.2010.88 ↗
24. Preliminary dynamic-mechanical analysis of polypropylene/short carbon fibers composites modified by a succinic anhydride-grafted atactic polypropylene10.1002/pen.24620 ↗
25. Sperling · 2005
26. Immiscible polymer blends made from industrial shredder residue mixed plastic with and without melt blending10.1021/acsapm.4c00360 ↗
27. Melt rheological behavior and morphology of poly(ethylene oxide)/natural rubber-graft-poly(methyl methacrylate) blends10.3390/polym12030724 ↗
28. Polymer/layered silicate nanocomposites: a review from preparation to processing10.1016/j.progpolymsci.2003.08.002 ↗
29. Recent trends and future outlooks in the field of clay-containing polymer nanocomposites10.1002/macp.201400069 ↗
30. Tensile and fracture behaviors of PC/ABS polymer alloy10.4028/www.scientific.net/KEM.183-187.779 ↗
31. Rheology and microscopic heterogeneity of poly(ethylene oxide) solid polymer electrolytes10.1002/masy.201700040 ↗
32. 3D printability of highly ductile poly(ethylene glycol-co-cyclohexane-1,4-dimethanol terephthalate)-EMAA blends10.1002/pen.25693 ↗
33. Bretas · 2005
34. Contributions of fourier transform infrared spectroscopy in microplastic pollution research: a review10.1080/10643389.2020.1807450 ↗
35. Changes during the weathering of polyolefins
36. Canevarolo · 2006
37. Mechanical, morphological, and thermal properties of nanotalc reinforced PA6/SEBS-g-MA composites10.1002/app.41381 ↗
38. Local and extended-order evolution of synthetic talc during hydrothermal synthesis: extended x-ray absorption fine structure, x-ray diffraction, and fourier transform infrared spectroscopy studies10.1021/acs.cgd.5b01076 ↗
39. Fundamentals of DMA
40. Quantification of the Young’s modulus for polypropylene: influence of initial crystallinity and service temperature
41. The effect of crosslink density on the cold crystallization behavior of polybutadiene elastomers10.3144/expresspolymlett.2023.51 ↗
42. Investigating the role of solvents in modulating glass transition and dynamic mechanical characteristics of polystyrene film10.1016/j.colsurfa.2024.135230 ↗
43. Mechanochemical degradation of amorphous polymers with ball-mill grinding: influence of the glass transition temperature10.1021/acs.macromol.0c01510 ↗
44. Investigation of fatigue behavior of ABS and PC-ABS polymers at different temperatures10.3390/ma11101818 ↗
45. Canevarolo · Técnicas De Caracterização de Polímeros · 2004 · 01 · 361