Molecular dynamics study on friction of low-carbon alloy steel 16MnCr5
Source abstract
Abstract
Abstract To enhance the durability and reliability of 16MnCr5 low-carbon alloy steel, it is essential to gain an in-depth understanding of the mechanisms underlying its friction and wear properties. While traditional pin-on-disk experiments can effectively investigate the influence of multiple factors on tribological performance, they are time-consuming and highly dependent on the machining accuracy of test specimens. In this study, molecular dynamics simulation was employed to systematically examine the effects of grinding depth, sliding velocity, temperature, and chromium content on the frictional properties of 16MnCr5 alloy. The tribological behavior of the alloy was analyzed by investigating the variations in normal force, friction coefficient, and number of atomic wear debris under different conditions. The results indicate that the aforementioned factors exert varying degrees of influence on the material’s friction coefficient and wear resistance. The friction coefficient and wear rate of 16MnCr5 alloy exhibit a positive correlation with indentation depth, sliding velocity, and temperature, driven by the enhanced interfacial interaction and atomic dislocations. An optimal chromium content of 1% balances hardness and ductility, minimizing the accumulation of wear debris while maintaining tribological stability.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Lubricants and Their Additives · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Brittle intermetallic compound makes ultrastrong low-density steel with large ductility10.1038/nature14144 ↗
2. Deformation-induced dynamic precipitation of 14H-LPSO structure and its effect on dynamic recrystallization in hot-extruded Mg-Y-Zn alloys10.1016/j.ijplas.2023.103573 ↗
3. Steels in additive manufacturing: a review of their microstructure and properties10.1016/j.msea.2019.138633 ↗
4. Effect of preheat & post-weld heat treatment on the microstructure and mechanical properties of 6061-T6 aluminum alloy welded sheets10.1016/j.msea.2022.143081 ↗
5. Study properties and mechanical behavior of the shaft material 16MnCr5
6. Effect of cryogenic treatment on the mechanical properties of alloy steel 16MnCr5
7. Distortion of ring type parts during fine-blanking
8. Investigating the effect of the deep cryogenic heat treatment on the corrosion and corrosive-wear behaviour of the carburised 16MnCr5 steel
9. 16MnCr5 gear shaft fracture caused by inclusions and heat treatment process10.1016/j.engfailanal.2021.105458 ↗
10. Experimental investigations and multiscale modeling to study the effect of sulfur content on formability of 16MnCr5 alloy steel10.1002/srin.201800369 ↗
11. Investigation on the case-hardening behavior of additively manufactured 16MnCr510.3390/met10040536 ↗
12. Correlation between microstructural alteration, mechanical properties and manufacturability after cryogenic treatment: a review10.3390/ma12203302 ↗
13. Micro-magnetic and microstructural characterization of wear progress on case-hardened 16MnCr5 gear wheels+10.3390/ma11112290 ↗
14. Friction and wear behavior of acetal and nylon gears10.1016/j.wear.2008.10.005 ↗
15. Investigation on wear characteristics of a titanium alloy/steel tribo-pair10.1016/j.matdes.2014.09.016 ↗
16. Molecular dynamics study on friction of polymer material polyamide 6 (PA 6)10.1080/08927022.2023.2276290 ↗
17. Molecular dynamic simulations of the roles of nanoparticles in sliding friction process10.1016/j.cplett.2019.04.076 ↗
18. Molecular dynamics simulation of a new inhomogeneous concentration distribution model based on frictional behavior of FeNiCrCoCu high-entropy alloy10.1016/j.mtcomm.2023.106337 ↗
19. Molecular dynamics study on friction of the iron-aluminum alloy10.1016/j.mtcomm.2022.104402 ↗
20. Effect of simulation conditions on friction in polytetrafluoroethylene (PTFE)10.1007/s10820-007-9087-4 ↗
21. Molecular dynamics study on dynamic interlayer friction of graphene and its strain effect10.1515/ntrev-2023-0128 ↗
22. Interface friction of double-walled carbon nanotubes investigated using molecular dynamics10.3390/mi8030084 ↗
23. Molecular dynamics simulations of nano-scale sliding friction
24. Exploring deformation mechanisms in a refractory high entropy alloy (MoNbTaW)10.1016/j.ijmecsci.2025.110000 ↗
25. Non-arrhenius migration and structural evolution of a faceted grain boundary in Ni-Cu alloy under shock-loading: molecular dynamics simulations10.1016/j.physb.2025.417072 ↗
26. Effects of grinding speeds on the subsurface damage of single crystal silicon based on molecular dynamics simulations10.1016/j.apsusc.2021.149668 ↗
27. Molecular dynamics study on friction of high-entropy alloy FeNiCrCoCu10.1016/j.mtcomm.2023.107107 ↗
28. Wear and friction between smooth or rough diamond-like carbon films and diamond tips10.1016/j.wear.2016.12.007 ↗
29. Molecular dynamics study on friction of polymer material polyoxymethylene (POM)10.1515/polyeng-2023-0260 ↗
30. Nano scratching of iron: a molecular dynamics study of the influence of surface orientation and scratching direction10.1016/j.commatsci.2015.03.011 ↗
31. Fracture mechanism of polycrystalline cubic boron nitride abrasive grains during single-grain grinding of Ti-6Al-4V titanium alloy10.1007/s00170-017-0873-1 ↗
32. Influence mechanism of grinding surface quality of 20CrMnTi steel on contact failure10.1038/s41598-024-64320-0 ↗
33. Contact and rubbing of flat surfaces10.1063/1.1721448 ↗
34. Influence of external load on the frictional characteristics of rotary model using a molecular dynamics approach10.1016/j.commatsci.2016.05.031 ↗
35. Hyaluronan random coils in electrolyte solutions-a molecular dynamics study10.1016/j.carbpol.2017.04.054 ↗
36. Micro CNC surface texturing on polyoxymethylene (POM) and its tribological performance in lubricated sliding10.1016/j.triboint.2011.03.001 ↗
37. Molecular dynamics simulation of friction coefficient of Fe-Al during lubrication10.1016/j.commatsci.2022.111895 ↗
38. Tribology of polymers: adhesion, friction, wear, and mass-transfer10.1016/j.triboint.2005.07.016 ↗
39. Mechanical response of ZrxCu100-x layer on Cu(001) substrate using molecular dynamics10.1016/j.tsf.2021.138954 ↗
40. Atomistic simulation and experimental verification of tribological behavior of high entropy alloy/graphene composite coatings10.1016/j.surfcoat.2023.129683 ↗
41. Structural design of flexible wheel of harmonic reducer based on efficiency improvement10.1016/j.ymssp.2023.110677 ↗