A numerical approach to characterize the compression and relaxation behavior of uncured prepreg laminates in the process of hot press-forming
Source abstract
Abstract
Abstract In the pre-forming process of uncured prepreg laminates with hot press, the compaction stress is an important parameter that affects the performance and quality of the final product. Therefore, it is necessary to explore the compaction response of the prepreg during manufacturing processes. In this study, the compression and relaxation viscoelastic behaviors of uncured prepreg laminates were investigated in different temperatures, displacements, velocities, and thicknesses. The results show that the power law model and the fractional viscoelastic model could accurately describe the compression and relaxation behaviors, respectively. The theoretical fitting curves match very well with experimental data at each condition and the R-squared value is greater than 0.95. The effect mechanism of compression and relaxation viscoelastic behaviors is analyzed and the obtained results could provide a reference for the process of hot press-forming and numerical simulation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Composite Structure Analysis and Optimization · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Micro-level mechanisms of fiber waviness and wrinkling during hot drape forming of unidirectional prepreg composites10.1016/j.compositesa.2017.10.008 ↗
2. Time–temperature equivalence in the tack and dynamic stiffness of polymer prepreg and its application to automated composites manufacturing10.1016/j.compositesa.2013.05.002 ↗
3. Development and verification of a finite element model for double diaphragm preforming of unidirectional carbon fiber prepreg10.1016/j.compositesa.2020.105924 ↗
4. Process for the realization of a stiffener made of composite material with an omega section
5. Method for forming fuselage stringers
6. Device and method of manufacturing omega stringers
7. Compressive failure of laminates containing an embedded wrinkle; experimental and numerical study10.1016/j.compositesa.2015.03.012 ↗
8. X-ray computed tomography characterization of manufacturing induced defects in a glass/polyester pultruded profile10.1016/j.compstruct.2018.04.030 ↗
9. The effect of fiber waviness on the fatigue life of CFRP materials10.1016/j.ijfatigue.2016.04.029 ↗
10. Characterisation of inter-ply shear in uncured carbon fibre prepreg10.1016/j.compositesa.2015.07.008 ↗
11. Buckling behaviour of laminated viscoelastic composites under axial loads10.1016/j.mechmat.2021.103897 ↗
12. A new test method for the characterization of the bending behavior of textile prepregs10.1016/j.compositesa.2017.02.027 ↗
13. Viscoelastic and cyclic compaction response of prepregs tested under isothermal temperatures and various compaction speeds10.1002/pc.26351 ↗
14. Through-thickness compression response of uncured prepreg during manufacture by automated layup10.1177/0954405411411817 ↗
15. A three-dimensional viscoelastic analysis of thermoplastic resin matrix composite laminates during hot stamping10.1088/2053-1591/abd733 ↗
16. A coupled hygrothermo-mechanical viscoelastic analysis of multilayered composite plates for long-term creep behaviors10.1016/j.compstruct.2020.112030 ↗
17. 2022 Prediction of curing process for thermosetting prepreg compression molding process based on machine learning10.1002/pc.26494 ↗
18. Using fractional derivatives for improved viscoelastic modeling of textile composites. Part I: Fabric yarns10.1177/0021998320912479 ↗
19. Development of fractional viscoelastic model for characterizing viscoelastic properties of food material during drying10.1016/j.fbio.2018.03.002 ↗
20. On the influence of the initial ramp for a correct definition of the parameters of fractional viscoelastic materials10.1016/j.mechmat.2013.09.017 ↗
21. The finite element implementation of 3D fractional viscoelastic constitutive models10.1016/j.finel.2018.04.003 ↗
22. Gel point determination of a thermoset prepreg by means of rheology10.1016/j.polymertesting.2019.105950 ↗
23. A method for the direct measurement of the fibre bed compaction curve of composite prepregs10.1016/S1359-835X(00)00143-3 ↗
24. Multiaxial mechanical characterization of latex skin for morphing wing application10.1016/j.polymertesting.2021.107408 ↗
25. Enhancement of electromechanical properties of natural rubber by adding barium titanate filler: An electro‐mechanical study10.1002/app.50991 ↗
26. Features and mechanical parameters of a fabric’s compressional property10.1080/00405009508658774 ↗
27. A 2001 nonlinear compaction model for fibrous preforms Compos10.1016/S1359-835X(00)00148-2 ↗
28. The role of psychophysics in rheology10.1016/0095-8522(47)90007-X ↗
29. Fractional viscoelastic models for power-law materials10.1039/D0SM00354A ↗
30. Influence of void content and morphology on the creep behavior on glass/epoxy composites10.1016/j.coco.2021.100712 ↗
31. Rate and temperature dependent compaction-creep-recovery and void analysis of compression molded prepregs10.1016/j.compositesb.2022.109757 ↗
32. Fracture toughness, hysteresis and stretchability of dielectric elastomers under equibiaxial and biaxial loading10.1016/j.polymertesting.2019.106038 ↗
33. A numerical approach to characterize the viscoelastic behaviour of fibre beds and to evaluate the influence of strain deviations on viscoelastic parameter extraction10.1016/j.compositesa.2021.106315 ↗
34. Compressibility and relaxation of fiber reinforcements during composite processing10.1002/pc.750120104 ↗