Chloride-Related Phenomena in Limestone Cement Materials: Effect of Mineral Admixtures and Sulfates
Source abstract
Abstract
First Name is required invalid characters Last Name is required invalid characters Email Address is required Invalid Email Address Invalid Email Address
Only a short abstract or summary was supplied by the source.
Source: openalex_inverted_index · Quality: short
Research context
OpenAlex topics: Concrete and Cement Materials Research · Concrete Corrosion and Durability · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (77)
Show source-provided references
1. Worrell, E., and Galitsky, C., “Energy Efficiency Improvement and Cost Saving Opportunities for Cement Making. An ENERGY STAR® Guide for Energy and Plant Managers,” Report LBNL-4779E, Energy Analysis & Environmental Impacts Division, Berkeley Lab, Berkeley, CA, 2008. doi: LBNL-4779E.10.2172/927882 ↗
2. Tsivilis, S.; Batis, G.; Chaniotakis, E.; Grigoriadis, G.; and Theodossis, D., “Properties and Behavior of Limestone Cement Concrete and Mortar,” Cement and Concrete Research, V. 30, No. 10, 2000, pp. 1679-1683. doi: 10.1016/S0008-8846(00)00372-010.1016/S0008-8846(00)00372-0 ↗
3. CEN, “Cement—Part 1: Composition, Specifications and Conformity Criteria for Common Cements (EN 197-1. EN/TC 51/WG 6),” European Committee for Standardization, Brussels, Belgium, 2011.
4. CEN, “Concrete—Specification, Performance, Production and Conformity (EN 206. CEN/TC 104),” European Committee for Standardization, Brussels, Belgium, 2013.
5. HOS, “Greek National Annex to ELOT EN 206: 2013 Concrete—Specification, Performance, Production and Conformity (draft),” 2016.
6. Crammond, N. J., “The Thaumasite Form of Sulfate Attack in the UK,” Cement and Concrete Composites, V. 25, No. 8, 2003, pp. 809-818. doi: 10.1016/S0958-9465(03)00106-910.1016/S0958-9465(03)00106-9 ↗
7. Bensted, J., “Thaumasite—Background and Nature in Deterioration of Cements, Mortars and Concretes,” Cement and Concrete Composites, V. 21, No. 2, 1999, pp. 117-121. doi: 10.1016/S0958-9465(97)00076-010.1016/S0958-9465(97)00076-0 ↗
8. Sotiriadis, K.; Rakanta, E.; Mitzithra, M. E.; Batis, G.; and Tsivilis, S., “Influence of Sulfates on Chloride Diffusion and Chloride-Induced Reinforcement Corrosion in Limestone Cement Materials at Low Temperature,” Journal of Materials in Civil Engineering, ASCE, V. 29, No. 8, 2017, p. 04017060 doi: 10.1061/(ASCE)MT.1943-5533.000189510.1061/(ASCE)MT.1943-5533.0001895 ↗
9. Song, H. W.; Lee, C. H.; and Ann, K. Y., “Factors Influencing Chloride Transport in Concrete Structures Exposed to Marine Environments,” Cement and Concrete Composites, V. 30, No. 2, 2008, pp. 113-121. doi: 10.1016/j.cemconcomp.2007.09.00510.1016/j.cemconcomp.2007.09.005 ↗
10. Shi, X.; Xie, N.; Fortune, K.; and Gong, J., “Durability of Steel Reinforced Concrete in Chloride Environments: An Overview,” Construction and Building Materials, V. 30, 2012, pp. 125-138. doi: 10.1016/j.conbuildmat.2011.12.03810.1016/j.conbuildmat.2011.12.038 ↗
11. Sotiriadis, K.; Nikolopoulou, E.; Tsivilis, S.; Pavlou, A.; Chaniotakis, E.; and Swamy, R. N., “The Effect of Chlorides on the Thaumasite Form of Sulfate Attack of Limestone Cement Concrete Containing Mineral Admixtures at Low Temperature,” Construction and Building Materials, V. 43, 2013, pp. 156-164. doi: 10.1016/j.conbuildmat.2013.02.01410.1016/j.conbuildmat.2013.02.014 ↗
12. Florea, M. V. A., and Brouwers, H. J., “Chloride Binding Related to Hydration Products Part I: Ordinary Portland Cement,” Cement and Concrete Research, V. 42, No. 2, 2012, pp. 282-290. doi: 10.1016/j.cemconres.2011.09.01610.1016/j.cemconres.2011.09.016 ↗
13. Florea, M. V. A., and Brouwers, H. J. H., “Modelling of Chloride Binding Related to Hydration Products in Slag-Blended Cements,” Construction and Building Materials, V. 64, 2014, pp. 421-430. doi: 10.1016/j.conbuildmat.2014.04.03810.1016/j.conbuildmat.2014.04.038 ↗
14. Baroghel-Bouny, V.; Wang, X.; Thiery, M.; Saillio, M.; and Barberon, F., “Prediction of Chloride Binding Isotherms of Cementitious Materials by ‘Analytical’ Model or ‘Numerical’ Inverse Analysis,” Cement and Concrete Research, V. 42, No. 9, 2012, pp. 1207-1224. doi: 10.1016/j.cemconres.2012.05.00810.1016/j.cemconres.2012.05.008 ↗
15. Barberon, F.; Baroghel-Bouny, V.; Zanni, H.; Bresson, B.; D’Espinose De La Caillerie, J. B.; Malosse, L.; and Gan, Z., “Interactions between Chloride and Cement-Paste Materials,” Magnetic Resonance Imaging, V. 23, No. 2, 2005, pp. 267-272. doi: 10.1016/j.mri.2004.11.02110.1016/j.mri.2004.11.021 ↗
16. Glass, G. K.; Reddy, B.; and Buenfeld, N. R., “The Participation of Bound Chloride in Passive Film Breakdown on Steel in Concrete,” Corrosion Science, V. 42, No. 11, 2000, pp. 2013-2021. doi: 10.1016/S0010-938X(00)00040-810.1016/S0010-938X(00)00040-8 ↗
17. Ann, K. Y., and Song, H. W., “Chloride Threshold Level for Corrosion of Steel in Concrete,” Corrosion Science, V. 49, No. 11, 2007, pp. 4113-4133. doi: 10.1016/j.corsci.2007.05.00710.1016/j.corsci.2007.05.007 ↗
18. Bernal Camacho, J.; Mahmoud Abdelkader, S.; Reyes Pozo, E.; and Moragues Terrades, A., “The Influence of Ion Chloride on Concretes Made with Sulfate-Resistant Cements and Mineral Admixtures,” Construction and Building Materials, V. 70, 2014, pp. 483-493. doi: 10.1016/j.conbuildmat.2014.07.10910.1016/j.conbuildmat.2014.07.109 ↗
19. Boubitsas, D., “Replacement of Cement by Limestone Filler or Ground Granulate Blast Furnace Slag: The Effect on Chloride Penetration in Cement Mortars,” Nordic Concrete Research, V. 36, 2007, pp. 1-13.
20. Bouteiller, V.; Cremona, C.; Baroghel-Bouny, V.; and Maloula, A., “Corrosion Initiation of Reinforced Concretes Based on Portland or GGBS Cements: Chloride Contents and Electrochemical Characterizations Versus Time,” Cement and Concrete Research, V. 42, No. 11, 2012, pp. 1456-1467. doi: 10.1016/j.cemconres.2012.07.00410.1016/j.cemconres.2012.07.004 ↗
21. Chen, H. J.; Huang, S. S.; Tang, C. W.; Malek, M. A.; and Ean, L. W., “Effect of Curing Environments on Strength, Porosity and Chloride Ingress Resistance of Blast Furnace Slag Cement Concretes: A Construction Site Study,” Construction and Building Materials, V. 35, 2012, pp. 1063-1070. doi: 10.1016/j.conbuildmat.2012.06.05210.1016/j.conbuildmat.2012.06.052 ↗
22. Gibas, K., and Glinicki, M. A., “Influence of Calcerous Fly Ash on Concrete Resistance to Migration of Chlorides,” Brittle Matrix Composites, V. 10, 2012, pp. 367-376. doi: 10.1533/9780857099891.36710.1533/9780857099891.367 ↗
23. Gruber, K. A.; Ramlochan, T.; Boddy, A.; Hooton, R. D.; and Thomas, M. D. A., “Increasing Concrete Durability with High-Reactivity Metakaolin,” Cement and Concrete Composites, V. 23, No. 6, 2001, pp. 479-484. doi: 10.1016/S0958-9465(00)00097-410.1016/S0958-9465(00)00097-4 ↗
24. Maes, M., and De Belie, N., “Resistance of Concrete and Mortar against Combined Attack of Chloride and Sodium Sulphate,” Cement and Concrete Composites, V. 53, 2014, pp. 59-72. doi: 10.1016/j.cemconcomp.2014.06.01310.1016/j.cemconcomp.2014.06.013 ↗
25. Mardani-Aghabaglou, A.; Inan Sezer, G.; and Ramyar, K., “Comparison of Fly Ash, Silica Fume and Metakaolin from Mechanical Properties and Durability Performance of Mortar Mixtures View Point,” Construction and Building Materials, V. 70, 2014, pp. 17-25. doi: 10.1016/j.conbuildmat.2014.07.08910.1016/j.conbuildmat.2014.07.089 ↗
26. Dhir, R. K.; El-Mohr, M. A. K.; and Dyer, T. D., “Chloride Binding in GGBS Concrete,” Cement and Concrete Research, V. 26, No. 12, 1996, pp. 1767-1773. doi: 10.1016/S0008-8846(96)00180-910.1016/S0008-8846(96)00180-9 ↗
27. Ogirigbo, O. R., and Black, L., “Chloride Binding and Diffusion in Slag Blends: Influence of Slag Composition and Temperature,” Construction and Building Materials, V. 149, 2017, pp. 816-825. doi: 10.1016/j.conbuildmat.2017.05.18410.1016/j.conbuildmat.2017.05.184 ↗
28. Xu, Y., “The Influence of Sulphates on Chloride Binding and Pore Solution Chemistry,” Cement and Concrete Research, V. 27, No. 12, 1997, pp. 1841-1850. doi: 10.1016/S0008-8846(97)00196-810.1016/S0008-8846(97)00196-8 ↗
29. Yuan, Q.; Shi, C.; De Schutter, G.; Audenaert, K.; and Deng, D., “Chloride Binding of Cement-Based Materials Subjected to External Chloride Environment—A Review,” Construction and Building Materials, V. 23, No. 1, 2009, pp. 1-13. doi: 10.1016/j.conbuildmat.2008.02.00410.1016/j.conbuildmat.2008.02.004 ↗
30. Badogiannis, E.; Aggeli, E.; Papadakis, V. G.; and Tsivilis, S., “Evaluation of Chloride-Penetration Resistance of Metakaolin Concrete by Means of a Diffusion—Binding Model and of the K-Value Concept,” Cement and Concrete Composites, V. 63, 2015, pp. 1-7. doi: 10.1016/j.cemconcomp.2015.07.01210.1016/j.cemconcomp.2015.07.012 ↗
31. Cheewaket, T.; Jaturapitakkul, C.; and Chalee, W., “Initial Corrosion Presented by Chloride Threshold Penetration of Concrete up to 10 Year-Results under Marine Site,” Construction and Building Materials, V. 37, 2012, pp. 693-698. doi: 10.1016/j.conbuildmat.2012.07.06110.1016/j.conbuildmat.2012.07.061 ↗
32. Chousidis, N.; Ioannou, I.; Rakanta, E.; Koutsodontis, C.; and Batis, G., “Effect of Fly Ash Chemical Composition on the Reinforcement Corrosion, Thermal Diffusion and Strength of Blended Cement Concretes,” Construction and Building Materials, V. 126, 2016, pp. 86-97. doi: 10.1016/j.conbuildmat.2016.09.02410.1016/j.conbuildmat.2016.09.024 ↗
33. Güneyisi, E.; Özturan, T.; and Gesoǧlu, M., “Effect of Initial Curing on Chloride Ingress and Corrosion Resistance Characteristics of Concretes Made with Plain and Blended Cements,” Building and Environment, V. 42, No. 7, 2007, pp. 2676-2685. doi: 10.1016/j.buildenv.2006.07.00810.1016/j.buildenv.2006.07.008 ↗
34. Moon, H. Y., and Shin, K. J., “Evaluation on Steel Bar Corrosion Embedded in Antiwashout Underwater Concrete Containing Mineral Admixtures,” Cement and Concrete Research, V. 36, No. 3, 2006, pp. 521-529. doi: 10.1016/j.cemconres.2005.09.01410.1016/j.cemconres.2005.09.014 ↗
35. Parande, A. K.; Ramesh Babu, B.; Aswin Karthik, M.; Deepak Kumaar, K. K.; and Palaniswamy, N., “Study on Strength and Corrosion Performance for Steel Embedded in Metakaolin Blended Concrete/Mortar,” Construction and Building Materials, V. 22, No. 3, 2008, pp. 127-134. doi: 10.1016/j.conbuildmat.2006.10.00310.1016/j.conbuildmat.2006.10.003 ↗
36. Shaheen, F., and Pradhan, B., “Influence of Sulfate Ion and Associated Cation Type on Steel Reinforcement Corrosion in Concrete Powder Aqueous Solution in the Presence of Chloride Ions,” Cement and Concrete Research, V. 91, 2017, pp. 73-86. doi: 10.1016/j.cemconres.2016.10.00810.1016/j.cemconres.2016.10.008 ↗
37. Türkmen, I.; Gavgali, M.; and Gül, R., “Influence of Mineral Admixtures on the Mechanical Properties and Corrosion of Steel Embedded in High Strength Concrete,” Materials Letters, V. 57, No. 13-14, 2003, pp. 2037-2043. doi: 10.1016/S0167-577X(02)01136-910.1016/S0167-577X(02)01136-9 ↗
38. Hossain, M. M.; Karim, M. R.; Hasan, M.; Hossain, M. K.; and Zain, M. F. M., “Durability of Mortar and Concrete Made Up of Pozzolans as a Partial Replacement of Cement: A Review,” Construction and Building Materials, V. 116, 2016, pp. 128-140. doi: 10.1016/j.conbuildmat.2016.04.14710.1016/j.conbuildmat.2016.04.147 ↗
39. Pradhan, B., “Corrosion Behavior of Steel Reinforcement in Concrete Exposed to Composite Chloride-Sulfate Environment,” Construction and Building Materials, V. 72, 2014, pp. 398-410. doi: 10.1016/j.conbuildmat.2014.09.02610.1016/j.conbuildmat.2014.09.026 ↗
40. Yildirim, H.; Ilica, T.; and Sengul, O., “Effect of Cement Type on the Resistance of Concrete against Chloride Penetration,” Construction and Building Materials, V. 25, No. 3, 2011, pp. 1282-1288. doi: 10.1016/j.conbuildmat.2010.09.02310.1016/j.conbuildmat.2010.09.023 ↗
41. Divsholi, B. S.; Lim, T. Y. D.; and Teng, S., “Durability Properties and Microstructure of Ground Granulated Blast Furnace Slag Cement Concrete,” International Journal of Concrete Structures and Materials, V. 8, No. 2, 2014, pp. 157-164. doi: 10.1007/s40069-013-0063-y10.1007/s40069-013-0063-y ↗
42. Sangoju, B.; Pillai, R. G.; Gettu, R.; Bharatkumar, B. H.; and Iyer, N. R., “Use of Portland Pozzolana Cement to Enhance the Service Life of Reinforced Concrete Exposed to Chloride Attack,” Journal of Materials in Civil Engineering, ASCE, V. 27, No. 11, 2015, p. 04015031 doi: 10.1061/(ASCE)MT.1943-5533.000129310.1061/(ASCE)MT.1943-5533.0001293 ↗
43. Thomas, M. D.; Hooton, D.; Cail, K.; Smith, B.; De Wal, J.; and Kazanis, K. G., “Field Trials of Concretes Produced with Portland Limestone Cement,” Concrete International, V. 32, No. 1, Jan. 2010, pp. 35-41.
44. Ipavec, A.; Vuk, T.; Gabrovšek, R.; and Kaučič, V., “Chloride Binding into Hydrated Blended Cements: The Influence of Limestone and Alkalinity,” Cement and Concrete Research, V. 48, 2013, pp. 74-85. doi: 10.1016/j.cemconres.2013.02.01010.1016/j.cemconres.2013.02.010 ↗
45. CEN, “Methods of Testing Cement—Part 6: Determination of Fineness (EN 196-6. CEN/TC 51),” European Committee for Standardization, Brussels, Belgium, 2010.
46. Tennis, P. D.; Thomas, M. D. A.; and Weiss, W. J., “State-of-the-Art Report on Use of Limestone in Cements at Levels of up to 15%,” Report SN3148, Portland Cement Association, Skokie, IL, 2011.
47. Tsivilis, S.; Voglis, N.; and Photou, J., “A Study on the Intergrinding of Clinker and Limestone,” Minerals Engineering, V. 12, No. 7, 1999, pp. 837-840. doi: 10.1016/S0892-6875(99)00068-010.1016/S0892-6875(99)00068-0 ↗
48. ASTM C618-15, “Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete,” ASTM International, West Conshohocken, PA, 2015, 5 pp.
49. Kosmatka, S. H.; Kerkhoff, B.; and Panarese, W. C., Design and Control of Concrete Mixtures, Portland Cement Association, Skokie, IL, 2002.
50. CEN, “Corrosion of Metals and Alloys—Removal of Corrosion Products from Corrosion Test Specimens (EN ISO 8407. CEN/TC 262),” European Committee for Standardization, Brussels, Belgium, 2014.
51. Irassar, E. F., “Sulfate Attack on Cementitious Materials Containing Limestone Filler—A Review,” Cement and Concrete Research, V. 39, No. 3, 2009, pp. 241-254. doi: 10.1016/j.cemconres.2008.11.00710.1016/j.cemconres.2008.11.007 ↗
52. CEN, “Method of Testing Cement—Part 2: Chemical Analysis of Cement (EN 196-2. CEN/TC 51),” European Committee for Standardization, Brussels, Belgium, 2013.
53. ASTM C1218/C1218M-15, “Standard Test Method for Water-Soluble Chloride in Mortar and Concrete,” ASTM International, West Conshohocken, PA, 2015, 3 pp.
54. Andrade, C.; Diez, J. M.; and Alonso, C., “Mathematical Modeling of a Concrete Surface ‘Skin Effect’ on Diffusion in Chloride Contaminated Media,” Advanced Cement Based Materials, V. 6, No. 2, 1997, pp. 39-44. doi: 10.1016/S1065-7355(97)00002-310.1016/S1065-7355(97)00002-3 ↗
55. ASTM C876-15, “Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete,” ASTM International, West Conshohocken, PA, 2015, 8 pp.
56. ASTM G59-97(2014), “Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements,” ASTM International, West Conshohocken, PA, 2014, 4 pp.
57. Stern, M., and Geary, A. L., “Electrochemical Polarization. I. A Theoretical Analysis of the Shape of Polarization Curves,” Journal of the Electrochemical Society, V. 104, No. 9, 1957, pp. 559-563. doi: 10.1149/1.242865310.1149/1.2428653 ↗
58. Andrade, C., and Alonso, C., “Corrosion Rate Monitoring in the Laboratory and On-Site,” Construction and Building Materials, V. 10, No. 5, 1996, pp. 315-328. doi: 10.1016/0950-0618(95)00044-510.1016/0950-0618(95)00044-5 ↗
59. Zuquan, J.; Wei, S.; Yunsheng, Z.; Jinyang, J.; and Jianzhong, L., “Interaction between Sulfate and Chloride Solution Attack of Concretes with and without Fly Ash,” Cement and Concrete Research, V. 37, No. 8, 2007, pp. 1223-1232. doi: 10.1016/j.cemconres.2007.02.01610.1016/j.cemconres.2007.02.016 ↗
60. Talero, R., “Comparative XRD Analysis Ettringite Originating from Pozzolan and from Portland Cement,” Cement and Concrete Research, V. 26, No. 8, 1996, pp. 1277-1283. doi: 10.1016/0008-8846(96)00092-010.1016/0008-8846(96)00092-0 ↗
61. Talero, R., “Expansive Synergic Effect of Ettringite from Pozzolan (Metakaolin) and from OPC, Co-Precipitating in a Common Plaster-Bearing Solution: Part I: By Cement Pastes and Mortars,” Construction and Building Materials, V. 24, No. 9, 2010, pp. 1779-1789. doi: 10.1016/j.conbuildmat.2010.02.00910.1016/j.conbuildmat.2010.02.009 ↗
62. Talero, R., “Expansive Synergic Effect of Ettringite from Pozzolan (Metakaolin) and from OPC, Co-Precipitating in a Common Plaster-Bearing Solution. Part II: Fundamentals, Explanation and Justification,” Construction and Building Materials, V. 25, No. 3, 2011, pp. 1139-1158. doi: 10.1016/j.conbuildmat.2010.09.00610.1016/j.conbuildmat.2010.09.006 ↗
63. Watt, J. D., and Thorne, D. J., “The Composition and Pozzolanic Properties of Pulverized Fuel Ashes,” Journal of Applied Chemistry (London), V. 16, No. 2, 1966, pp. 33-39. doi: 10.1002/jctb.501016020110.1002/jctb.5010160201 ↗
64. Walker, R., and Pavía, S., “Physical Properties and Reactivity of Pozzolans, and their Influence on the Properties of Lime-Pozzolan Pastes,” Materials and Structures, V. 44, No. 6, 2011, pp. 1139-1150. doi: 10.1617/s11527-010-9689-210.1617/s11527-010-9689-2 ↗
65. Paiva, H.; Velosa, A.; Cachim, P.; and Ferreira, V. M., “Effect of Pozzolans with Different Physical and Chemical Characteristics on Concrete Properties,” Materiales de Construcción, V. 66, No. 322, 2016, p. e083 doi: 10.3989/mc.2016.0181510.3989/mc.2016.01815 ↗
66. Talero, R.; Trusilewicz, L.; Delgado, A.; Pedrajas, C.; Lannegrand, R.; Rahhal, V.; Mejía, R.; Delvasto, S.; and Ramírez, F. A., “Comparative and Semi-Quantitative XRD Analysis of Friedel’s Salt Originating from Pozzolan and Portland Cement,” Construction and Building Materials, V. 25, No. 5, 2011, pp. 2370-2380. doi: 10.1016/j.conbuildmat.2010.11.03710.1016/j.conbuildmat.2010.11.037 ↗
67. Loser, R.; Lothenbach, B.; Leemann, A.; and Tuchschmid, M., “Chloride Resistance of Concrete and Its Binding Capacity—Comparison between Experimental Results and Thermodynamic Modeling,” Cement and Concrete Composites, V. 32, No. 1, 2010, pp. 34-42. doi: 10.1016/j.cemconcomp.2009.08.00110.1016/j.cemconcomp.2009.08.001 ↗
68. Xu, J.; Zhang, C.; Jiang, L.; Tang, L.; Gao, G.; and Xu, Y., “Releases of Bound Chlorides from Chloride-Admixed Plain and Blended Cement Pastes Subjected to Sulfate Attacks,” Construction and Building Materials, V. 45, 2013, pp. 53-59. doi: 10.1016/j.conbuildmat.2013.03.06810.1016/j.conbuildmat.2013.03.068 ↗
69. Rahman, M. M., and Bassuoni, M. T., “Thaumasite Sulfate Attack on Concrete: Mechanisms, Influential Factors and Mitigation,” Construction and Building Materials, V. 73, 2014, pp. 652-662. doi: 10.1016/j.conbuildmat.2014.09.03410.1016/j.conbuildmat.2014.09.034 ↗
70. Luo, R.; Cai, Y.; Wang, C.; and Huang, X., “Study of Chloride Binding and Diffusion in GGBS Concrete,” Cement and Concrete Research, V. 33, No. 1, 2003, pp. 1-7. doi: 10.1016/S0008-8846(02)00712-310.1016/S0008-8846(02)00712-3 ↗
71. De Weerdt, K.; Orsáková, D.; and Geiker, M. R., “The Impact of Sulphate and Magnesium on Chloride Binding in Portland Cement Paste,” Cement and Concrete Research, V. 65, 2014, pp. 30-40. doi: 10.1016/j.cemconres.2014.07.00710.1016/j.cemconres.2014.07.007 ↗
72. Geng, J.; Easterbrook, D.; Li, L. Y.; and Mo, L. W., “The Stability of Bound Chlorides in Cement Paste with Sulfate Attack,” Cement and Concrete Research, V. 68, 2015, pp. 211-222. doi: 10.1016/j.cemconres.2014.11.01010.1016/j.cemconres.2014.11.010 ↗
73. Trejo, D., and Tibbits, C., “The Influence of SCM Type and Quantity on the Critical Chloride Corrosion Threshold,” Chloride Thresholds and Limits for New Construction, SP-308, D. Tepke, D. Trejo, and O. B. Isgor, eds., American Concrete Institute, Farmington Hills, MI, 2016, pp. 1-20.
74. Schlegel, M. C.; Stroh, J.; Malaga, K.; Meng, B.; Panne, U.; and Emmerling, F., “Pathway of a Damaging Mechanism-Analyzing Chloride Attack by Synchrotron Based X-Ray Diffraction,” Solid State Sciences, V. 44, 2015, pp. 45-54. doi: 10.1016/j.solidstatesciences.2015.03.02110.1016/j.solidstatesciences.2015.03.021 ↗
75. Liu, G.; Zhang, Y.; Ni, Z.; and Huang, R., “Corrosion Behavior of Steel Submitted to Chloride and Sulphate Ions in Simulated Concrete Pore Solution,” Construction and Building Materials, V. 115, 2016, pp. 1-5. doi: 10.1016/j.conbuildmat.2016.03.21310.1016/j.conbuildmat.2016.03.213 ↗
76. Broomfield, J. P., Corrosion of Steel in Concrete: Understanding, Investigation and Repair, second edition, CRC Press, Boca Raton, FL, 2006, 296 pp. doi:10.4324/9780203414606.10.4324/9780203414606
77. ASTM C494/C494M-16, “Standard Specification for Chemical Admixtures for Concrete,” ASTM International, West Conshohocken, PA, 2016, 10 pp.