journal article·2022-02-01Open access

The Effect of Sr composition on the microstructure and mechanical properties of Al-Si-Zn filler for the brazing of AA6061

Guangyu Wang, Rui Ma, Mingpan Wan, Fei Zhao

Materials Research Express· Volume 9· Issue 2

Abstract

Abstract The microstructure and properties of Al-Si-Zn-Sr filler metals and brazed 6061-T6 aluminum alloy after heat treatment were studied, and the adsorption energy of Sr element on Si (111) surface was calculated. After Sr was added to Al-6Si-40Zn filler metal, its melting range remained unchanged, and the spreading wettability was improved. The microstructure mainly includes α-Al solid solution, fibrous Si, and η-Zn solid solution. Generally speaking, increasing Sr content could improve the average microhardness of brazed joints. The shear strength of the brazed joint containing Al-6Si-40Zn-0.8Sr filler metal was 134.23 MPa, which was 39.3% higher than that of the brazed joint without Sr The calculation results of adsorption energy showed that the surface of Si (111) mainly adsorbed Sr at the vacancy, which changed the growth mode of Si.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Corrosion performance of high pressure die-cast Al-Si-Mg-Zn alloys in 3.5 wt% NaCl solution10.1016/j.jallcom.2018.12.313 ↗
2. Microstructures and mechanical properties of brazed 6063 aluminum alloy joint with Al-Cu-Si-Ni filler metal,10.1007/s40194-020-00972-6 ↗
3. Mp · 2021
4. The effect of silicon on the strengthening and work hardening of aluminum at room temperature - ScienceDirect10.1016/j.msea.2012.11.062 ↗
5. Giertler · 2013
6. Effects of samarium addition on microstructure and mechanical properties of as-cast Al-Si-Cu alloy10.1016/S1003-6326(13)62857-5 ↗
7. Study on microstructure of 6061 aluminum alloy brazed with Al-Si-Zn filler metals bearing Sr and Ti10.1016/S1875-5372(14)60035-7 ↗
8. Brazing of 6061 aluminum alloy with the novel Al-Si-Ge-Zn filler metal10.1016/j.matlet.2016.05.052 ↗
9. Hattori · 1995
10. Effects of Cu/Mg ratio on the microstructure, mechanical and corrosion properties of Al-Li-Cu-Mg-X alloys10.1016/j.msea.2018.01.118 ↗
11. Microstructural characteristics and aging response of Zn-containing Al-Mg-Si-Cu alloy10.1007/s12613-013-0780-x ↗
12. On the AA2198-T851 alloy microstructure and its correlation with localized corrosion behaviour10.1016/j.corsci.2017.12.001 ↗
13. Effect of mixed rare earth and Sr on microstructure and Brazability of Al-20Cu-5Si-2Ni filler metal
14. Effects of copper content on the microstructure and brazing properties of Al-Si-Cu-Zn-Re filler metals,10.1007/s40194-015-0279-3 ↗
15. Eutectic phase equilibrium of Al-Si-Zn system and its applicability for lower temperature brazing10.2464/jilm.43.533 ↗
16. The role of strontium in modifying aluminium–silicon alloys10.1016/j.actamat.2012.03.031 ↗
17. Effect of modification treatment on the microstructure and mechanical properties of Al–0.35%Mg–7.0%Si cast alloy10.1016/j.matdes.2010.04.032 ↗
18. Development of Al–Si–Zn–Sr filler metals for brazing 6061 aluminum alloy10.1016/j.matdes.2012.06.031 ↗
19. Influence of Sr additions on microstructure and properties of Al–Si–Ge–Zn filler metal for brazing 6061 aluminum alloy10.1557/jmr.2016.467 ↗
20. 2008
21. First-principles study of crystal structure and stability of Al–Mg–Si–(Cu) precipitates10.1016/j.actamat.2004.05.037 ↗
22. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
23. Reversible work transiton state theory: application to dissociative adsorption of hydrogen10.1016/0039-6028(94)00731-4 ↗
24. On influence of Ti and Sr on microstructure, mechanical properties and quality index of cast eutectic Al–Si–Mg alloy10.1016/j.matdes.2010.12.012 ↗
25. The mechanism of silicon modification in aluminum-silicon alloys: Impurity induced twinning10.1007/BF02646204 ↗