journal article·2024-09-01Open access

Effect of Y2O3 on thermophysical parameters and mechanical properties of Al-Al2O3 composites and compatibility with high temperature Al-Si alloys

Zhang Ruiying, Xue Rongxin, Li Yuqi

Materials Research Express· Volume 11· Issue 9

Abstract

Abstract Al-Al2O3 is a crucial encapsulation composite used in solar thermal storage systems. This study utilized Al and Al2O3 powders as raw materials, with Y2O3 serving as a sintering aid, to prepare Al-20Al2O3-xY2O3 composites (x = 0, 0.2, 0.4, 0.6, 0.8, 1.0 wt%) through the cold pressure sintering method. The latent heat, thermal conductivity, and bending strength of the Al-20Al2O3-xY2O3 composites were measured. The compatibility of the composites with Al-12 wt%Si alloys was analyzed. Furthermore, the relationships between thermophysical parameters, mechanical properties, compatibility, and microstructure were explored. The oxidation mechanism of Al and the wetting angle of the composites with Al-12Si were simulated using LAMMPS software. It was concluded that with an increase in Y2O3 content, the bending strength, thermal conductivity, and compatibility of the composites initially increased and then decreased. The Al-20Al2O3-0.2Y2O3 composite exhibited the least porosity, highest bending strength (76.32 MPa), and thermal conductivity (46.82 W/(m·K)). In compatibility testing, the diffusion distance of Si atoms was shortest (90 μm) in the Al-20Al2O3-0.2Y2O3 composite. Moreover, this composite had the largest wetting angle (88°) with the Al-12Si alloy, resulting in good compatibility between them.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Thermal storage properties of Al-Si alloys
2. Study of the organisation and thermal storage properties of phase change energy storage aluminium alloys
3. Calorimetric study of metallic phase change heat storage materials
4. Selection of high-temperature phase change material Al-Si alloy and its experimental study on the compatibility of metal containers
5. Thermal storage in metals
6. Heat storage in eutectic alloys
7. Immersion study of liquid aluminium-silicon alloys
8. Experimental study on the cycling stability and corrosive property of Al-Si alloys as phase change materials in high-temperature heat storage10.1016/j.solmat.2019.110165 ↗
9. Low-temperature sintering of Al-Al2O3 ceramic matrix composites
10. Study on the sintering characteristics of Al-Al2O3powder formers
11. Preparation of high strength and toughness Al2O3 ceramic substrates by La2O3-Y2O3 complex doping
12. Effect of MgO andY2O3 co-doping on the organisation and properties of transparent alumina ceramics
13. LAMMPS-based study of methane adsorption/desorption and flow patterns in coal nanopores
14. Phase transition for a hard sphere system10.1063/1.1743957 ↗
15. Xie · 2022
16. Application and development of noble metal potential functions for molecular dynamics simulations
17. Visualization and analysis of atomistic simulation data with OVITO-the Open Visualization Tool
18. Introduction to molecular dynamics simulations10.1119/10.0000654 ↗
19. Molecular Dynamics Study on SiO2 Interfaces of Nonfiring Solids
20. Liu · 2021
21. Dong · 2017
22. Comparative study on the preparation of ceramics in Y-Al-O system by solid-phase reaction of Y2O3-Al2O3 powders
23. Effects of ternary compound additives on densification and microstructure of alumina10.1016/j.msea.2007.07.069 ↗
24. Effect of Yttrium and Lanthanum on the final-stage sintering behavior of ultrahigh-purity alumina10.1111/j.1151-2916.1997.tb03084.x ↗
25. Xu · 2022
26. Effect of sintering additives Y2O3 and Pr6O11 on relative density and thermal conductivity of Al2O3 ceramics
27. Hu · 2019
28. Effect of fragmentation of Al2O3 film on properties in nano-Al2O3 composites
29. Research and progress in the application of rare earths in aluminium and aluminium alloys
30. Organisation and properties of in situ reactive Al2O3-Al-Si matrix composites
31. Yu · 2014
32. Research progress and application of metal-based phase change materials
33. Yu · 2003
34. Compatibility study of energy storage medium Al-12Si-5Cu with metal containers
35. Li · 2021
36. Liu · 2009
37. Advances in experimental characterisation and theoretical prediction of metal-ceramic wettability
38. Wang · 2019
39. Liu · 2016