journal article·2020-10-01Open access

Effect of annealing time on bimodal microstructures and tensile properties of Mg–6Sn–3Al–1Zn alloy

Fuan Wei, Jinhui Wang, Bo Shi, Zhengang Zhang

Materials Research Express· Volume 7· Issue 10

Abstract

Abstract Although the Mg–6Sn–3Al–1Zn alloy with bimodal grain size distribution has excellent mechanical properties, its mechanical properties can further be improved by adjusting or controlling its microstructures through annealing. In this study, the effect of annealing time on microstructures and mechanical properties of the Mg–6Sn–3Al–1Zn alloy was systematically studied. The Mg–6Sn–3Al–1Zn alloy with bimodal microstructures was prepared through pack-rolling with two passes at 450 °C (55 % thickness reduction per pass, and the total rolling deformation is 80 %). Then the alloy was annealed for 10 min, 20 min, 30 min and 40 min at 350 °C, respectively. The results showed that volume fractions of Mg2Sn phase and recrystallization grains increased with increasing of the annealing time. The multi-modal microstructures were formed in alloys after annealing. When the annealing time ≤30 min, the average grain size of the alloy increased with increasing of the annealing time, while it decreased after annealed for 40 min. The intensity of {0001} texture decreased with increasing of annealing time (<20 min), which caused by dynamic recovery. When the annealing time reached 30 min, the generation of recrystallization led to the enhancement of {0001} texture. However, the {0001} texture intensity reduced after the alloy was annealed for 40 min, which caused by further dynamic recrystallization. In Mg–6Sn–3Al–1Zn alloy annealed for 30 min, the volume fractions of Mg2Sn phase and recrystallization grains were respectively 1.29 % and 56 %, and the average grain size was 6.28 μm. Moreover, the mechanical properties of the alloy reached optimum, i.e., the tensile strength, yield strength and elongation were 336 MPa, 194 MPa and 26 %, respectively.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Enhanced ductility of a fine-grained Mg-Gd-Al-Zn magnesium alloy by hot extrusion10.1002/adem.201701171 ↗
2. Twenty-five years of ultrafine-grained materials: achieving exceptional properties through grain refinement10.1016/j.actamat.2013.08.018 ↗
3. Paradox of strength and ductility in metals processed by severe plastic deformation10.1557/JMR.2002.0002 ↗
4. Nanostructuring of metals by severe plastic deformation for advanced properties10.1038/nmat1180 ↗
5. Nanostructured metals: retaining ductility10.1038/nmat1141 ↗
6. High tensile ductility in a nanostructured metal10.1038/nature01133 ↗
7. Three strategies to achieve uniform tensile deformation in a nanostructured metal10.1016/j.actamat.2003.12.022 ↗
8. Al–Mg alloy engineered with bimodal grain size for high strength and increased ductility10.1016/S1359-6462(03)00283-5 ↗
9. Heterogeneous plastic deformation in bimodal bulk ultrafine-grained nickel10.1007/s10853-011-5979-5 ↗
10. High tensile ductility and strength in bulk nanostructured nickel10.1002/adma.200800214 ↗
11. Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility10.1073/pnas.1517193112 ↗
12. Simultaneously enhanced strength and ductility of titanium via multimodal grain structure10.1016/j.scriptamat.2010.07.010 ↗
13. High strength and ductility in multimodal-structured Zr10.1016/j.matdes.2011.08.002 ↗
14. Tailoring grain size distribution for optimizing strength and ductility of multi-modal Zr10.1016/j.matlet.2013.07.001 ↗
15. High strength and ductile ultrafine-grained Cu-Ag alloy through bimodal grain size, dislocation density and solute distribution10.1016/j.actamat.2012.09.053 ↗
16. Controllable bimodal structures in hypo-eutectoid Cu-Al alloy for both high strength and tensile ductility10.1016/j.msea.2008.03.002 ↗
17. Achieve high ductility and strength in an Al-Mg alloy by severe plastic deformation combined with inter-pass annealing10.1016/j.msea.2013.12.103 ↗
18. High ductility bulk nanostructured Al-Mg binary alloy processed by equal channel angular pressing and inter-pass annealing10.1016/j.scriptamat.2015.04.018 ↗
19. Microstructure evolution and mechanical behavior of a binary Al-7Mg alloy processed by equal-channel angular pressing10.1016/j.actamat.2014.10.025 ↗
20. High tensile ductility and strength in dual-morphology hierarchical nanolamellar-structured TiZr alloys10.1016/j.matlet.2014.05.204 ↗
21. A novel technique for developing bimodal grain size distributions in low carbon steels10.1016/j.scriptamat.2007.08.035 ↗
22. A novel process to obtain ultrafine-grained low carbon steel with bimodal grain size distribution for potentially improving ductility10.1016/j.msea.2007.09.026 ↗
23. Relationship between yield strength and grain size for a bimodal structural ultrafine-grained ferrite/cementite steel10.1016/j.scriptamat.2007.06.062 ↗
24. Microstructures and tensile properties of 304 steel with dual nanocrystalline and microcrystalline austenite content prepared by aluminothermic reaction casting10.1080/09500839.2014.932456 ↗
25. Effect of annealing temperature on microstructure and mechanical properties of bulk 316L stainless steel with nano- and micro-crystalline dual phases10.1007/s11661-014-2432-9 ↗
26. EBSD study of a hot deformed austenitic stainless steel10.1016/j.msea.2012.01.037 ↗