journal article·2019-01-01

Concrete with High Volume of Recycled Concrete Aggregates and Fly Ash: Shrinkage Behavior Modeling

Authors not provided

ACI Materials Journal· Volume 116· Issue 1
Publisher page

Abstract

First Name is required invalid characters Last Name is required invalid characters Email Address is required Invalid Email Address Invalid Email Address
Only a short abstract or summary was supplied by the source.
Source: openalex_inverted_index · Quality: short

Research context

OpenAlex topics: Recycled Aggregate Concrete Performance · Structural Behavior of Reinforced Concrete · Geotechnical Engineering and Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (87)

Show source-provided references
1. Freedonia, “World Construction Aggregates—Demand and Sales Forecasts, Market Share, Market Size, Market Leaders,” Industry Study No. 3389, Freedonia Group, Cleveland, OH, 2016, 390 pp.
2. USGS, “Commodity Statistics and Information,” Mineral Yearbooks: U.S. Geological Survey, 2015.
3. Duve, T., “Seaborne Trades of Fly Ash and Global trends of Cementitious Products,” Third International ASHTRANS Conference, 2015, 19 pp.
4. BP, “Full Report—Statistical Review of World Energy,” http://www.bp.com/en/global/corporate/about-bp.html, 2017, 49 pp.
5. Rodrigues, P.; Silvestre, J. D.; Flores-Colen, I.; Viegas, C. A.; de Brito, J.; Kurad, R.; and Demertzi, M., “Methodology for the Assessment of the Ecotoxicological Potential of Construction Materials,” Materials (Basel), V. 10, No. 6, 2017, pp. 649-667. doi: 10.3390/ma1006064910.3390/ma10060649 ↗
6. de Brito, J., and Silva, R., “Current Status on the Use of Recycled Aggregates in Concrete: Where Do We Go from Here?” RILEM Technical Letters, V. 1, 2016, pp. 1-5. doi: 10.21809/rilemtechlett.2016.310.21809/rilemtechlett.2016.3 ↗
7. Evangelista, L., and de Brito, J., “Mechanical Behaviour of Concrete Made with Fine Recycled Concrete Aggregates,” Cement and Concrete Composites, V. 29, No. 5, 2007, pp. 397-401. doi: 10.1016/j.cemconcomp.2006.12.00410.1016/j.cemconcomp.2006.12.004 ↗
8. Korre, A., and Durucan, S., “Life Cycle Assessment of Aggregates,” Final Report: Aggregates Industry Life Cycle Assessment Model: Modelling Tools and Case Studies (EVA025),” Waste and Resources Action Programme, Oxon, UK, 2009, 41 pp.
9. Braunschweig, A.; Kytzia, S.; and Bischof, S., “Recycled Concrete: Environmentally Beneficial over Virgin Concrete?” LCM 2011—Towards Life Cycle Sustainability Management, Berlin, Germany, 2011, 12 pp.
10. De Schepper, M.; Van den Heede, P.; Van Driessche, I.; and De Belie, N., “Life Cycle Assessment of Completely Recyclable Concrete,” Materials (Basel), V. 7, No. 8, 2014, pp. 6010-6027. doi: 10.3390/ma708601010.3390/ma7086010 ↗
11. Estanqueiro, B.; Silvestre, J. D.; de Brito, J.; and Pinheiro, M. D., “Environmental Life Cycle Assessment of Coarse Natural and Recycled Aggregates for Concrete,” European Journal of Environmental and Civil Engineering, V. 22, No. 4, 2018, pp. 429-449. doi: 10.1080/19648189.2016.119716110.1080/19648189.2016.1197161 ↗
12. O’Brien, K.; Ménaché, J.; and O’Moore, L., “Impact of Fly Ash Content and Fly Ash Transportation Distance on Embodied Greenhouse Gas Emissions and Water Consumption in Concrete,” The International Journal of Life Cycle Assessment, V. 14, No. 7, 2009, pp. 621-629. doi: 10.1007/s11367-009-0105-510.1007/s11367-009-0105-5 ↗
13. Chen, C.; Habert, G.; Bouzidi, Y.; Jullien, A.; and Ventura, A., “LCA Allocation Procedure Used as an Incitative Method for Waste Recycling: An Application to Mineral Additions in Concrete,” Resources, Conservation and Recycling, V. 54, No. 12, 2010, pp. 1231-1240. doi: 10.1016/j.resconrec.2010.04.00110.1016/j.resconrec.2010.04.001 ↗
14. Mindess, S.; Young, J.; and Darwin, D., Concrete, second edition, Pearson Education, Prentice Hall, New York, 2003.
15. Coutinho, S., and Goncalves, A., Concrete Fabrication and Properties, second edition, LNEC, Lisboa, 1994. (in Portuguese)
16. Mehta, P., and Monteiro, P. J. M., Concrete: Microstructure, Properties, and Materials, McGraw-Hill Education, 2006.
17. Sagoe-Crentsil, K.; Brown, T.; and Taylor, A., “Performance of Concrete Made with Commercially Produced Coarse Recycled Concrete Aggregate,” Cement and Concrete Research, V. 31, No. 5, 2001, pp. 707-712. doi: 10.1016/S0008-8846(00)00476-210.1016/S0008-8846(00)00476-2 ↗
18. Guo, Y.; Qian, J.; and Wang, X., “Pore Structure and Influence of Recycled Aggregate Concrete on Drying Shrinkage,” Mathematical Problems in Engineering, V. 2013, 2013, pp. 1-7.10.1155/2013/912412 ↗
19. Corinaldesi, V., “Structural Concrete Prepared with Coarse Recycled Concrete Aggregate: From Investigation to Design,” Advances in Civil Engineering, 2011, pp. 1-6. doi: 10.1155/2011/28398410.1155/2011/283984 ↗
20. Khatib, J. M., “Properties of Concrete Incorporating Fine Recycled Aggregate,” Cement and Concrete Research, V. 35, No. 4, 2005, pp. 763-769. doi: 10.1016/j.cemconres.2004.06.01710.1016/j.cemconres.2004.06.017 ↗
21. Solyman, M., “Classification of Recycled Sands and their Applications as Fine Aggregates for Concrete and Bituminous Mixtures,” PhD dissertation, Fachbereich Bauingenieurwesen der Universität Kassel, Germany, 2005, 171 pp. https://d-nb.info/976291770/34
22. Kou, S., and Poon, C., “Properties of Self-Compacting Concrete Prepared with Coarse and Fine Recycled Concrete Aggregates,” Cement and Concrete Composites, V. 31, No. 9, 2009, pp. 622-627. doi: 10.1016/j.cemconcomp.2009.06.00510.1016/j.cemconcomp.2009.06.005 ↗
23. Zega, J., and Di Maio, A., “Use of Recycled Fine Aggregate in Concretes with Durable Requirements,” Waste Management (New York, NY), V. 31, No. 11, 2011, pp. 2336-2340. doi: 10.1016/j.wasman.2011.06.01110.1016/j.wasman.2011.06.011 ↗
24. Malhotra, V. M., and Mehta, P. K., “High-Performance, High-Volume Fly Ash Concrete,” Supplementary Cementing Materials for Sustainable Development Inc., Ottawa, ON, Canada, 2005.
25. Atiş, C., “High-Volume Fly Ash Concrete with High Strength and Low Drying Shrinkage,” Journal of Materials in Civil Engineering, ASCE, V. 15, No. 2, 2003, pp. 153-156. doi: 10.1061/(ASCE)0899-1561(2003)15:2(153)10.1061/(ASCE)0899-1561(2003)15:2(153) ↗
26. Nath, P., and Sarker, P. K., “Effect of Mixture Proportions on the Drying Shrinkage and Permeation Properties of High Strength Concrete Containing Class F Fly Ash,” KSCE Journal of Civil Engineering, V. 17, No. 6, 2013, pp. 1437-1445. doi: 10.1007/s12205-013-0487-610.1007/s12205-013-0487-6 ↗
27. Limbachiya, M.; Meddah, M. S.; and Ouchagour, Y., “Use of Recycled Concrete Aggregate in Fly-Ash Concrete,” Construction and Building Materials, V. 27, No. 1, Feb. 2012, pp. 439-449.10.1016/j.conbuildmat.2011.07.023 ↗
28. Cong, K., “Reusing Recycled Aggregates in Structural Concrete,” PhD thesis, Hong Kong Polytechnic University, Hong Kong, China, 2006, 278 pp.
29. Corinaldesi, V., and Moriconi, G., “Influence of Mineral Additions on the Performance of 100% Recycled Aggregate Concrete,” Construction and Building Materials, V. 23, No. 8, 2009, pp. 2869-2876. doi: 10.1016/j.conbuildmat.2009.02.00410.1016/j.conbuildmat.2009.02.004 ↗
30. EN 12620, “Aggregates for Concrete,” British Standards Institution, London, UK, 2008, 60 pp.
31. EN 933-1, “Tests for Geometrical Properties of Aggregates. Determination of Particle Size Distribution. Sieving Method,” Comité Européen de Normalisation (CEN), Brussels, Belgium, 2012.
32. EN 1097-2, “Tests for Mechanical and Physical Properties of Aggregates. Methods for the Determination of Resistance to Fragmentation,” Comité Européen de Normalisation (CEN), Brussels, Belgium, 2010, 38 pp.
33. EN 1097-6, “Tests for Mechanical and Physical Properties of Aggregates. Determination of Particle Density and Water Absorption,” Comité Européen de Normalisation (CEN), Brussels, Belgium, 2013, 54 pp.
34. EN 933-4, “Tests for Geometrical Properties of Aggregates. Determination of Particle Shape. Shape Index,” Comité Européen de Normalisation (CEN), Brussels, Belgium, 2008, 14 pp.
35. EN 1992-1-1, “Eurocode 2: Design of Concrete Structures. General Rules and Rules for Buildings,” British Standards Institution, 2004, 230 pp.
36. EN 206-1, “Concrete – Part 1: Specification, Performance, Production and Conformity,” Comité Européen de Normalisation (CEN), Brussels, Belgium, 2000, 72 pp.
37. Kurda, R.; de Brito, J.; and Silvestre, J. D., “Influence of Recycled Aggregates and High Contents of Fly Ash on Concrete Fresh Properties,” Cement and Concrete Composites, V. 84, 2017, pp. 198-213. doi: 10.1016/j.cemconcomp.2017.09.00910.1016/j.cemconcomp.2017.09.009 ↗
38. LNEC E398, “Determination of Shrinkage and Expansion,” LNEC – Laboratório Nacional de Engenharia Civil, Portugal, 1993, 2 pp. (in Portuguese)
39. ASTM C157-08(2014), “Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete,” ASTM International, West Conshohocken, PA, 2014, 7 pp.
40. EN 12390-7, “Testing Hardened Concrete. Density of Hardened Concrete,” British Standards Institution, London, UK, 2009.
41. EN 12390-3, “Testing Hardened concrete. Compressive Strength of Test Specimens,” Comité Européen de Normalisation (CEN), Brussels, Belgium, 2009, 22 pp.
42. Silva, P., and de Brito, J., “Electrical Resistivity and Capillarity of Self-Compacting Concrete with Incorporation of Fly Ash and Limestone Filler,” Advances in Concrete Construction, V. 1, No. 1, 2013, pp. 65-84. doi: 10.12989/acc.2013.1.1.06510.12989/acc.2013.1.1.065 ↗
43. Kurda, R.; de Brito, J.; and Silvestre, J. D., “Indirect Evaluation of the Compressive Strength of Recycled Aggregate Concrete with High Fly Ash Ratios,” Magazine of Concrete Research, V. 70, No. 4, 2018, pp. 204-216. doi: 10.1680/jmacr.17.0021610.1680/jmacr.17.00216 ↗
44. Kou, S., and Poon, C., “Long-Term Mechanical and Durability Properties of Recycled Aggregate Concrete Prepared with the Incorporation of Fly Ash,” Cement and Concrete Composites, V. 37, 2013, pp. 12-19. doi: 10.1016/j.cemconcomp.2012.12.01110.1016/j.cemconcomp.2012.12.011 ↗
45. Katz, A., “Properties of Concrete Made with Recycled Aggregate from Partially Hydrated Old Concrete,” Cement and Concrete Research, V. 33, No. 5, 2003, pp. 703-711. doi: 10.1016/S0008-8846(02)01033-510.1016/S0008-8846(02)01033-5 ↗
46. Kurad, R.; Silvestre, J. D.; de Brito, J.; and Ahmed, H., “Effect of Incorporation of High Volume of Recycled Concrete Aggregates and Fly Ash on the Strength and Global Warming potential of Concrete,” Journal of Cleaner Production, V. 166, 2017, pp. 485-502. doi: 10.1016/j.jclepro.2017.07.23610.1016/j.jclepro.2017.07.236 ↗
47. ACI Committee 209, “Guide for Modeling and Calculating Shrinkage and Creep in Hardened Concrete (ACI 209.2R-08),” American Concrete Institute, Farmington Hills, MI, 2008, 44 pp.
48. EN-1992-1-1, “Eurocode 2 – Design of Concrete Structures. Part 1-1: General Rules and Rules for Buildings,” Comité Européen de Normalisation (CEN), Brussels, Belgium, 2008, 259 pp.
49. Silva, R. V.; de Brito, J.; and Dhir, R. K., “Prediction of the Shrinkage Behavior of Recycled Aggregate Concrete: A Review,” Construction and Building Materials, V. 77, 2015, pp. 327-339. doi: 10.1016/j.conbuildmat.2014.12.10210.1016/j.conbuildmat.2014.12.102 ↗
50. Bažant, Z. P., and Baweja, S., “Creep and Shrinkage Prediction Model for Analysis and Design of Concrete Structures—Model B3,” Materials and Structures, V. 28, No. 6, 1995, pp. 357-365. doi: 10.1007/BF0247315210.1007/BF02473152 ↗
51. CEB-FIP, “Model Code for Concrete Structures,” Comité Euro-International du Béton, Lausanne, Switzerland, 1990, 462 pp.
52. Gardner, N. J., and Lockman, M. J., “Design Provisions for Drying Shrinkage and Creep of Normal-Strength Concrete,” ACI Materials Journal, V. 98, No. 2, Mar.-Apr. 2001, pp. 159-167.10.14359/10199 ↗
53. Pedro, D.; de Brito, J.; and Evangelista, L., “Performance of Concrete Made with Aggregates Recycled from Precasting Industry Waste: Influence of the Crushing Process,” Materials and Structures, V. 48, No. 12, 2015, pp. 3965-3978. doi: 10.1617/s11527-014-0456-710.1617/s11527-014-0456-7 ↗
54. Bravo, M.; de Brito, J.; Pontes, J.; and Evangelista, L., “Shrinkage and Creep Performance of Concrete with Recycled Aggregates from CDW Plants,” Magazine of Concrete Research, V. 69, No. 19, 2017, pp. 974-995. doi: 10.1680/jmacr.17.0003110.1680/jmacr.17.00031 ↗
55. Cartuxo, F.; de Brito, J.; Evangelista, L.; Jiménez, J. R.; and Ledesma, E. F., “Rheological Behaviour of Concrete Made with Fine Recycled Concrete Aggregates—Influence of the Superplasticizer,” Construction and Building Materials, V. 89, 2015, pp. 36-47. doi: 10.1016/j.conbuildmat.2015.03.11910.1016/j.conbuildmat.2015.03.119 ↗
56. Hansen, C., and Narud, H., “Strength of Recycled Concrete Made from Crushed Concrete Coarse Aggregate,” Concrete International, V. 5, No. 1, Jan. 1983, pp. 79-83.
57. Evangelista, L.; Guedes, M.; de Brito, J.; Ferro, A. C.; and Pereira, M. F., “Physical, Chemical and Mineralogical Properties of Fine Recycled Aggregates Made from Concrete Waste,” Construction and Building Materials, V. 86, 2015, pp. 178-188. doi: 10.1016/j.conbuildmat.2015.03.11210.1016/j.conbuildmat.2015.03.112 ↗
58. Cartuxo, F., “Concrete with Fine Recycled Concrete Aggregates: Influence of Superplasticizers on the Durability Related Performance,” master’s thesis, Universidade de Lisboa/Instituto Superior Técnico, Portugal, 2013, 232 pp. (translated from Portuguese)
59. Kurda, R.; de Brito, J.; and Silvestre, J., “Combined Influence of Recycled Concrete Aggregates and High Contents of Fly Ash on Concrete Properties,” Construction and Building Materials, V. 157, 2017, pp. 554-572. doi: 10.1016/j.conbuildmat.2017.09.12810.1016/j.conbuildmat.2017.09.128 ↗
60. Pereira, P.; Evangelista, E.; and de Brito, J., “The effect of Superplasticisers on the Workability and Compressive Strength of Concrete made with Fine Recycled Concrete Aggregates,” Construction and Building Materials, V. 28, No. 1, 2012, pp. 722-729. doi: 10.1016/j.conbuildmat.2011.10.05010.1016/j.conbuildmat.2011.10.050 ↗
61. Cartuxo, F.; de Brito, J.; Evangelista, L.; Jiménez, R.; and Ledesma, F., “Rheological Behaviour of Concrete Made with Fine Recycled Concrete Aggregates—Influence of the Superplasticizer,” Construction and Building Materials, V. 89, 2015, pp. 36-47. doi: 10.1016/j.conbuildmat.2015.03.11910.1016/j.conbuildmat.2015.03.119 ↗
62. Rashad, A. M., “A Brief on High-Volume Class F Fly Ash as Cement Replacement—A Guide for Civil Engineer,” International Journal of Sustainable Built Environment, V. 4, No. 2, 2015, pp. 278-306. doi: 10.1016/j.ijsbe.2015.10.00210.1016/j.ijsbe.2015.10.002 ↗
63. Atis, C., “Strength Properties of High-Volume Fly Ash Roller Compacted and Workable Concrete, and Influence of Curing Condition,” Cement and Concrete Research, V. 35, No. 6, 2005, pp. 1112-1121. doi: 10.1016/j.cemconres.2004.07.03710.1016/j.cemconres.2004.07.037 ↗
64. Mehta, P. K., “Effect of Lime on Hydration of Pastes Containing Gypsum and Calcium Aluminates or Calcium Sulfoaluminate,” Journal of the American Ceramic Society, V. 56, No. 6, 1973, pp. 315-319. doi: 10.1111/j.1151-2916.1973.tb12503.x10.1111/j.1151-2916.1973.tb12503.x ↗
65. Mehta, P. K., and Hu, F., “Further Evidence for Expansion of Ettringite by Water Adsorption,” Journal of the American Ceramic Society, V. 61, No. 3-4, 1978, pp. 179-181. doi: 10.1111/j.1151-2916.1978.tb09271.x10.1111/j.1151-2916.1978.tb09271.x ↗
66. Taylor, H. F. W.; Famy, C.; and Scrivener, K. L., “Delayed Ettringite Formation,” Cement and Concrete Research, V. 31, No. 5, 2001, pp. 683-693. doi: 10.1016/S0008-8846(01)00466-510.1016/S0008-8846(01)00466-5 ↗
67. Kumar, B.; Tike, G.; and Nanda, K., “Evaluation of Properties of High-Volume Fly-Ash Concrete for Pavements,” Journal of Materials in Civil Engineering, ASCE, V. 19, No. 10, 2007, pp. 906-911. doi: 10.1061/(ASCE)0899-1561(2007)19:10(906)10.1061/(ASCE)0899-1561(2007)19:10(906) ↗
68. Gesoğlu, M.; Güneyisi, E.; and Özbay, E., “Properties of Self-Compacting Concretes Made with Binary, Ternary, and Quaternary Cementitious Blends of Fly Ash, Blast Furnace Slag, and Silica Fume,” Construction and Building Materials, V. 23, No. 5, 2009, pp. 1847-1854. doi: 10.1016/j.conbuildmat.2008.09.01510.1016/j.conbuildmat.2008.09.015 ↗
69. Bravo, M., “Performance of Concrete with Recycled Aggregates from Construction and Demolition Waste from Portuguese Recycling Plants,” PhD thesis, Universidade de Lisboa, Instituto Superior Técnico, Portugal, 2016, 522 pp. (in Portuguese)
70. Gomez-Soberon, J., “Creep of Concrete with Substitution of Normal Aggregate by Recycled Concrete Aggregate,” Innovations in Design with Emphasis on Seismic, Wind, and Environmental Loading: Quality Control and Innovations in Materials/Hot-Weather Concreting, SP-209, American Concrete Institute, Farmington Hills, MI, 2002, pp. 461-474.
71. Domingo, A.; Lázaro, C.; Gayarre, F. L.; Serrano, M. A.; and López-Colina, C., “Long-Term Deformations by Creep and Shrinkage in Recycled Aggregate Concrete,” Materials and Structures, V. 43, No. 8, 2010, pp. 1147-1160. doi: 10.1617/s11527-009-9573-010.1617/s11527-009-9573-0 ↗
72. Debieb, F., and Kenai, S., “The Use of Coarse and Fine Crushed Bricks as Aggregate in Concrete,” Construction and Building Materials, V. 22, No. 5, 2008, pp. 886-893. doi: 10.1016/j.conbuildmat.2006.12.01310.1016/j.conbuildmat.2006.12.013 ↗
73. Corinaldesi, V., “Mechanical and Elastic Behaviour of Concretes Made of Recycled-Concrete Coarse Aggregates,” Construction and Building Materials, V. 24, No. 9, 2010, pp. 1616-1620. doi: 10.1016/j.conbuildmat.2010.02.03110.1016/j.conbuildmat.2010.02.031 ↗
74. Bravo, M.; de Brito, J.; Pontes, J.; and Evangelista, L., “Durability Performance of Concrete with Recycled Aggregates from Construction and Demolition Waste Plants,” Construction and Building Materials, V. 77, 2015, pp. 357-369. doi: 10.1016/j.conbuildmat.2014.12.10310.1016/j.conbuildmat.2014.12.103 ↗
75. Koulouris, A.; Limbachiya, M. C.; Fried, A. N.; and Roberts, J. J., “Use of Recycled Aggregate in Concrete Application: Case Studies,” International Conference on Sustainable Waste Management and Recycling: Challenges and Opportunities, London, UK, 2004, pp. 245-257.
76. Kou, S. C.; Poon, C. S.; and Chan, D., “Influence of Fly Ash as Cement Replacement on the Properties of Recycled Aggregate Concrete,” Journal of Materials in Civil Engineering, ASCE, V. 19, No. 9, 2007, pp. 709-717. doi: 10.1061/(ASCE)0899-1561(2007)19:9(709)10.1061/(ASCE)0899-1561(2007)19:9(709) ↗
77. Juan, M. S., and Gutiérrez, P. A., “Influence of Recycled Aggregate Quality on Concrete Properties,” International RILEM Conference on the Use of Recycled Materials in Buildings and Structures, Barcelona, Spain, 2004, pp. 545-553.
78. Kenai, S.; Debieb, F.; and Azzouz, L., “Mechanical Properties and Durability of Concrete Made with Coarse and Fine Recycled Aggregates,” International Symposium on Sustainable Concrete Construction, Dundee, Scotland, UK, 2002, pp. 383-392.10.1680/scc.31777.0039 ↗
79. Pedro, D.; de Brito, J.; and Evangelista, L., “Influence of the Use of Recycled Concrete Aggregates from Different Sources on Structural Concrete,” Construction and Building Materials, V. 71, 2014, pp. 141-151. doi: 10.1016/j.conbuildmat.2014.08.03010.1016/j.conbuildmat.2014.08.030 ↗
80. Ravindrarajah, R. S.; Loo, Y. H.; and Tam, C. T., “Recycled Concrete as Fine and Coarse Aggregates in Concrete,” Magazine of Concrete Research, V. 39, No. 141, 1987, pp. 214-220. doi: 10.1680/macr.1987.39.141.21410.1680/macr.1987.39.141.214 ↗
81. Razaqpur, A. G.; Fathifazl, G.; Isgor, B.; Abbas, A.; Fournier, B.; and Foo, S., “How to Produce High Quality Concrete Mixes with Recycled Concrete Aggregate,” Second International Conference on Waste Engineering Management (ICWEM 2010), Shanghai, China, 2010, pp. 11-35.
82. Manzi, S.; Mazzotti, C.; and Bignozzi, M. C., “Short and Long-Term Behavior of Structural Concrete with Recycled Concrete Aggregate,” Cement and Concrete Composites, V. 37, 2013, pp. 312-318. doi: 10.1016/j.cemconcomp.2013.01.00310.1016/j.cemconcomp.2013.01.003 ↗
83. Vieira, T.; Alves, A.; de Brito, J.; Correia, J.; and Silva, R., “Durability-Related Performance of Concrete Containing Fine Recycled Aggregates from Crushed Bricks and Sanitary Ware,” Materials and Design, V. 90, 2016, pp. 767-776. doi: 10.1016/j.matdes.2015.11.02310.1016/j.matdes.2015.11.023 ↗
84. Yang, K.; Chung, H.; and Ashour, A., “Influence of Type and Replacement Level of Recycled Aggregates on Concrete Properties,” ACI Materials Journal, V. 105, No. 3, May-June 2008, pp. 289-296.10.14359/19826 ↗
85. Zhu, Y.-G.; Kou, S.-C.; Poon, C.-S.; Dai, J.-G.; and Li, Q.-Y., “Influence of Silane-Based Water Repellent on the Durability Properties of Recycled Aggregate Concrete,” Cement and Concrete Composites, V. 35, No. 1, 2013, pp. 32-38. doi: 10.1016/j.cemconcomp.2012.08.00810.1016/j.cemconcomp.2012.08.008 ↗
86. Rodrigues, F.; Evangelista, L.; and de Brito, J., “A New Method to Determine the Density and Water Absorption of Fine Recycled Aggregates,” Materials Research, V. 16, No. 5, 2013, pp. 1045-1051. doi: 10.1590/S1516-1439201300500007410.1590/S1516-14392013005000074 ↗
87. Leite, M., “Evaluation of the Mechanical Properties of Concrete Produced with Recycled Aggregates from Construction and Demolition Wastes,” PhD thesis, Federal University of Rio Grande do Sul, Brazil, 2001, 270 pp.