Tailoring sintering step allows high performance for solid oxide fuel cells prepared by a tri-layer co-firing process
Source abstract
Abstract
Abstract A step sintering strategy is proposed to sinter the solid oxide fuel cell fabricated by the tri-layer co-firing method. Compared with the conventional sintering strategy for the tri-layer co-firing method which has to compromise the cathode performance with electrolyte densification, tailoring sintering steps allows the densification of electrolyte and the formation of an optimal cathode microstructure simultaneously, leading to a much enhanced electrochemical performance. The impedance analysis suggests that the desirable cathode microstructure achieved through the step sintering favors the cathode reaction, attaining a polarization resistance as low as 0.022 Ω cm2 at 700 °C which is about one third of that for the cell sintered by a conventional method. The cell performance reaches 455 mW cm−2 at 700 °C by employing the step sintering strategy, while the cell performance measured is only 289 mW cm−2 with the conventional sintering approach.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Role of solid oxide fuel cells in a balanced energy strategy10.1039/C1EE02445K ↗
2. Correlation between electroconductive and structural properties of proton conductive acceptor-doped barium zirconate10.1039/C4TA05701E ↗
3. Investigation into the effects of sulfur on syngas reforming inside a solid oxide fuel cell10.1016/j.jpowsour.2014.02.041 ↗
4. Co-fabrication of nickel-YSZ cermet nanofibers via an electrospinning technique10.1016/j.materresbull.2016.10.006 ↗
5. Effect of volatile boron species on the electrocatalytic activity of cathodes of solid oxide fuel cells II. (La,Sr)(Co,Fe)O3 based electrodes10.1149/2.019304jes ↗
6. A new cobalt-free proton-blocking composite cathode La2NiO4–LaNi0.6Fe0.4O3 for BaZr0.1Ce0.7Y0.2O3 -based solid oxide fuel cells10.1016/j.jpowsour.2014.04.089 ↗
7. Proton-conducting solid oxide fuel cells with yttrium-doped barium zirconate electrolyte films sintered at reduced temperatures10.1016/j.jallcom.2015.10.275 ↗
8. Chemically stable BaZr0.7Pr0.1Y0.2O3 -BaCe0.8Y0.2O3 bilayer electrolyte for intermediate temperature solid oxide fuel cells10.1016/j.electacta.2014.11.071 ↗
9. Investigation of cobalt-free perovskite Ba0.95La0.05FeO3 as a cathode for proton-conducting solid oxide fuel cells10.1016/j.jpowsour.2011.07.020 ↗
10. Polarization measurements on single-step co-fired solid oxide fuel cells (SOFCs)10.1016/j.jpowsour.2007.03.003 ↗
11. Interface reactions during co-firing of solid oxide fuel cell components10.1016/j.jmatprotec.2003.11.025 ↗
12. Proton-conducting solid oxide fuel cells prepared by a single step co-firing process10.1016/j.jpowsour.2009.02.049 ↗
13. High-performance cathode-supported SOFCs prepared by a single-step co-firing process10.1016/j.jpowsour.2008.04.039 ↗
14. La2Ce2O7: a promising proton ceramic conductor in hydrogen economy10.1016/j.jallcom.2015.11.041 ↗
15. Flexible multiphysics simulation of porous electrodes: conformal to 3D reconstructed microstructures10.1016/j.nanoen.2012.08.002 ↗
16. Effect of anode functional layer on the performance of proton-conducting solid oxide fuel cells (SOFCs)10.1016/j.elecom.2011.12.023 ↗
17. Enhanced performance of solid oxide fuel cell by manipulating the orientation of cylindrical pores in anode substrate10.1002/fuce.201100121 ↗
18. Recent progress on synthesis, multi-scale structure, and properties of Y-Si-O oxides10.1179/1743280414Y.0000000033 ↗
19. Fabrication of BaZr0.1Ce0.7Y0.2O3 -based proton-conducting solid oxide fuel cells co-fired at 1,150degreesC10.1002/fuce.200900206 ↗
20. Facile one-step fabrication of dual-pore anode for planar solid oxide fuel cell by the phase inversion10.1016/j.elecom.2012.05.026 ↗
21. Electrochemical performance of solid oxide fuel cells manufactured by single step co-firing process10.1149/1.2436610 ↗
22. Micro-tubular solid oxide fuel cells with graded anodes fabricated with a phase inversion method10.1016/j.jpowsour.2010.08.074 ↗
23. Sinteractivity, proton conductivity and chemical stability of BaZr0.7In0.3O3 for solid oxide fuel cells (SOFCs)10.1016/j.ssi.2011.06.014 ↗