Excellent bonding strength between steel and thermoplastic resin using roughened electrodeposited Ni/CNT composite layer without adhesives
Source abstract
Abstract
Abstract The joining of steel and a thermoplastic resin without adhesives was investigated using a roughened electrodeposited nickel film. The roughened film was fabricated by composite plating techniques using carbon nanotubes. Chemical etching of the roughened film was also examined. The steel coated with the roughened film was joined to the thermoplastic resin by injection molding. The bonding strength was evaluated by means of a tensile lap shear strength test and the microstructure of the boundary between the coated steel substrate and the resin was analyzed. The shear strength between the steel coated with the etched roughened film and the resin exceeded 40 MPa with very little variation and the fracture mode was cohesive failure of the resin. This method offers a way to achieve consistent bonding strength with different metal substrates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Carbon Nanotubes in Composites · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Super light car – lightweight construction thanks to a multi-material design and function integration10.1007/s12544-008-0001-2 ↗
2. Joining of polymers and polymer-metal hybrid structures: recent developments and trend10.1002/pen.21424 ↗
3. Influence of molding conditions on joining strength of injection molded parts joined with metal and resin, Yamabe
4. Direct joining of a laser-ablated metal surface and polymers by precise injection molding10.1007/s00542-015-2640-2 ↗
5. Adhesion of thermoplastic elastomer on surface treated aluminum by injection molding10.1002/pen.20801 ↗
6. Ultra-high-strength micro-mechanical interlocking by injection molding into laser-structured surfaces10.1016/j.ijadhadh.2010.03.008 ↗
7. Laser assisted joining of plastic metal hybrids10.1016/j.phpro.2011.03.146 ↗
8. Thermal joining of thermoplastic metal hybrids by means of mono- and polychromatic radiation10.1016/j.phpro.2013.03.056 ↗
9. Effect of molten pool shape on tensile shear strength of dissimilar materials laser spot joint between plastic and metal10.2961/jlmn.2013.02.0008 ↗
10. Evaluation of mechanical interlock effect on adhesion strength of polymer-metal interfaces using micro-patterned surface topography10.1016/j.ijadhadh.2010.05.004 ↗
11. Effects of molding conditions on injection molded direct joining using a metal with nano-structured surface10.1016/j.precisioneng.2016.02.013 ↗
12. Thermoplastic bonding to metals via injection molding for macro-composite manufacture10.1002/pen.10253 ↗
13. The effects of grid-blasting on surface properties for adhesion10.1016/S0143-7496(98)00061-X ↗
14. Aluminum sheet surface roughness correlation with adhesion in polymer metal hybrid overmolding10.1016/j.cirp.2011.03.073 ↗
15. Filamentous growth of carbon through benzene decomposition10.1016/0022-0248(76)90115-9 ↗
16. Helical microtubules of graphitic carbon10.1038/354056a0 ↗
17. Nickel electroplating bath using citric acid10.4139/sfj.52.462 ↗
18. Carbon nanofiber-copper composite powder prepared by electrodeposition10.1016/j.elecom.2003.08.002 ↗
19. ISO 19095-3, Plastics-evaluation of the adhesion interface performance in plastic-metal assemblies – Part 3: Test methods (2015).
20. Ni-deposited multi-walled carbon nanotubes by electrodeposition10.1016/j.carbon.2003.12.084 ↗
21. Low-internal-stress nickel multiwalled carbon nanotube composite electrodeposited from a sulfamate bath10.1149/1.2768285 ↗