Enhancing fiber–matrix interfacial bond in ultra-high-performance concrete containing titanium dioxide
Source abstract
Abstract
Abstract This study investigated the interfacial bond behavior of straight steel fiber in ultra-high-performance concrete (UHPC) containing titanium dioxide (TiO2) as an alternative to silica flour. Experiments were conducted for five replacement ratios (i.e., 0%, 25%, 50%, 75%, and 100%) of TiO2. The results indicated a significant improvement in the bond performance of the steel fiber of UHPC containing TiO2. The best performance was exhibited by the 50% replacement ratio specimen, which showed the highest average bond strength and pullout energy of 7.22 MPa and 447.9 mJ, respectively. Although the benefits of adding TiO2 decreased beyond the replacement ratio of 50%, the 100% replacement ratio specimen demonstrated higher bond strengths and pullout energy than those without TiO2. Thus, TiO2 helps suppress the pullout of steel fiber from UHPC more effectively, which was verified by the presence of severe surface scratches on the steel fiber.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (8)
Show source-provided references
1. Photocatalytic oxidation of NOx gases using TiO2: a surface spectroscopic approach10.1016/S0269-7491(02)00107-0 ↗
2. Photocatalytic construction and building materials: from fundamentals to applications10.1016/j.buildenv.2009.01.002 ↗
3. High-performance photocatalytic cementitious materials containing synthetic fibers and shrinkage-reducing admixture10.3390/ma13081828 ↗
4. A review on structural behavior, design, and application of ultra-high-performance fiber-reinforced concrete10.1007/s40069-016-0143-x ↗
5. Nitrogen oxides mitigation efficiency of cementitious materials incorporated with TiO210.3390/ma11060877 ↗
6. Flexural behavior of an ultrahigh-performance concrete I-girder10.1061/(ASCE)1084-0702(2008)13:6(602) ↗
7. D.J. Kim, S. El-Tawil, A.E. Naaman, Effect of matrix strength on pullout behavior of high-strength deformed steel fibers, in: Am. Concr. Institute, ACI Spec. Publ. 272 (2010) 135–150.
8. Using TiO2 nanoparticles as a SO2 catalyst in cement mortars10.1016/j.conbuildmat.2020.119542 ↗