journal article·2000-12

Highly enhanced sinterability of commercial PZT powders by high-energy ball milling

L.B Kong, J Ma, W Zhu, O.K Tan

Materials Letters· Volume 46· Issue 5
Publisher page

Abstract

Abstract High-energy ball milling technique was successfully applied to a commercial lead zirconate titanate (PZT) powder to decrease its sintering temperature by 100°C. The sinterability enhancement of commercial PZT powder through this technique was evidenced by experimental results. The commercial PZT powder is made up of ball-shaped particles of tens of micrometers in size, consisting of
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Dielectric materials and actuators · Microwave Dielectric Ceramics Synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Jaffe · J. Am. Ceram. Soc. · 1958 · 41 · 49410.1111/j.1151-2916.1958.tb12903.x ↗
2. Piezoelectric properties of lead zirconate–titanate solid solution ceramics10.1063/1.1721741 ↗
3. Ferroelectric ceramics: history and technology10.1111/j.1151-2916.1999.tb01840.x ↗
4. Materials issues in design and performance of piezoelectric actuators: an overview10.1016/S1359-6454(98)00102-5 ↗
5. Tip deflection and blocking force of soft PZT-based cantilever RAINBOW actuators10.1111/j.1151-2916.1999.tb01729.x ↗
6. Resonant pressure sensor based on piezoelectric properties of ferroelectric thick films10.1016/0924-4247(92)80096-L ↗
7. Micromachined high frequency ferroelectric sonar transducers10.1109/58.655620 ↗
8. Microfabricated lamb wave device based on PZT sol–gel thin film for mechanical transport of solid particles and liquids10.1109/84.650131 ↗
9. Micromachined piezoelectric force sensors based on PZT thin films10.1109/58.503715 ↗
10. Multilayer piezoelectric ceramics for two-dimensional array transducers10.1109/58.308512 ↗
11. Fuda · Jpn. J. Appl. Phys. · 1995 · 34 · 527010.1143/JJAP.34.5270 ↗
12. Design and fabrication of a high performance multilayer piezoelectric actuator with bending deformation10.1109/58.775669 ↗
13. Conventionally prepared submicrometer lead-based perovskite powders by reactive calcination10.1111/j.1151-2916.1990.tb05236.x ↗
14. Mechanism of phase formation in Pb(ZrxTi1−x)O3 synthesized by a partial oxalate method10.1111/j.1151-2916.1996.tb08765.x ↗
15. Hydroxide coprecipitation route to the piezoelectric oxide Pb(Zr, Ti)O310.1039/jm9950500065 ↗
16. Effect of powder characteristics on microstructure and properties in alkoxide-prepared PZT ceramics10.1149/1.2114189 ↗
17. Reaction mechanisms in the formation of lead zirconate solid solutions under hydrothermal conditions10.1111/j.1151-2916.1993.tb03651.x ↗
18. Synthesis of pyrochlore-free 0.9Pb(Mb1/3Nb2/3)O3–0.1PbTiO3 ceramics via a soft mechanochemical route10.1111/j.1151-2916.1997.tb02929.x ↗
19. Structure and thermal stability of nanostructured iron-doped zirconia prepared by high-energy ball milling10.1557/JMR.1999.0183 ↗
20. Mechanochemical synthesis of lead zirconate titanate from mixed oxides10.1111/j.1151-2916.1999.tb01987.x ↗
21. Preparation and characterization of Pb(Zr0.52Ti0.48)O3 ceramics from high-energy ball milling powders10.1016/S0167-577X(99)00190-1 ↗
22. The structure and property characteristics of amorphous/nanocrystalline silicon produced by ball milling10.1557/JMR.1995.0139 ↗
23. Multiple combustion induced by ball milling10.1063/1.118086 ↗