journal article·2021-02

Brazing of tungsten based alloy/superalloy GH907 with lean Cu-Ag based fillers: Wetting, interfaces and performance evaluation

Yuxin Xu, Xiaoming Qiu, Suyu Wang, Jinlong Su, Fei Xing

Materials Letters· Volume 284
Publisher page

Abstract

Abstract Vacuum brazing of tungsten based alloy and superalloy GH907 using lean Cu-Ag based fillers (CuAg30, CuAg30V0.2, CuAg30V0.4, wt%) at 1050 °C for 20 min was investigated. CuAg30V0.4 filler showed a maximum spreading area of 132.4 mm2 and minimum contact angle of 15.94° on tungsten based alloy during wetting process. The reduction of solid–liquid surface tension and the accelerated spreading rate driven by the diffusion of V atoms synergistically promoted the wettability and brazeability. Furthermore, the formation of (Fe, Ni) diffusion layer as well as Cu-rich infiltration zone seem to be responsible for high performance of joints, which exhibited 223.83 MPa of shear strength with V content of 0.4%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. de Prado · J. Mater. Process. Technol. · 2018 · 252 · 21110.1016/j.jmatprotec.2017.09.024 ↗
2. Tejado · J. Nucl. Mater. · 2020 · 54210.1016/j.jnucmat.2020.152504 ↗
3. de Prado · Mater. Charact. · 2018 · 142 · 16210.1016/j.matchar.2018.05.035 ↗
4. Shang · J. Alloys Compd. · 2014 · 611 · 9110.1016/j.jallcom.2014.05.106 ↗
5. Xu · Vacuum · 2020
6. de Prado · J. Nucl. Mater. · 2020 · 53310.1016/j.jnucmat.2020.152117 ↗
7. Mazilkin · Mater. Lett. · 2017 · 192 · 10110.1016/j.matlet.2016.12.049 ↗
8. Straumal · Mater. Lett. · 2015 · 147 · 10510.1016/j.matlet.2015.02.029 ↗
9. Mazilkin · Mater. Lett. · 2020 · 27210.1016/j.matlet.2020.127730 ↗
10. Wolski · Mater. Sci. Eng. A · 2008 · 495 · 13810.1016/j.msea.2007.10.107 ↗