journal article·2018-05

Multi-walled carbon nanotube incorporated nanoporous titanium dioxide electrodes for hybrid polymer solar cells

K. Balashangar, S. Paranthaman, M. Thanihaichelvan, P.A. Amalraj, D. Velauthapillai, P. Ravirajan

Materials Letters· Volume 219
Publisher page

Abstract

Abstract This study focuses on incorporating multi-walled carbon nanotubes (MWNT) in nanoporous titanium dioxides (TiO2) thin film for enhancing the performance of hybrid poly(3-hexylthiophene)(P3HT)/TiO2 solar cells. MWNTs were successfully incorporated in the nanoporous TiO2 electrodes either by systematically blending or dipping prior to the deposition of P3HT. Current density–voltage (J-V) characteristic of the corresponding fabricated devices showed that the short-circuit current density (JSC) and fill factor are strongly influenced by the amount of MWNT incorporated into TiO2 nanoparticles. Solar cells with optimum amount of MWNT incorporated by blending in nanoporous TiO2 layer showed a factor of two efficiency enhancement, mainly due to improvement in JSC compared to the corresponding control device. Further increment in MWNT reduces the efficiency mainly due to a sharp drop in fill factor and VOC, which can be attributed to shunting by excess amount of MWNTs. Devices with MWNT dip-coated TiO2 and polymer too showed enhanced efficiency over 2.5% under AM 1.5 illumination (100 mW cm−2), which is a factor of three higher than the corresponding control device.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Organic Electronics and Photovoltaics · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. Enhanced performance of nanoporous titanium dioxide solar cells using cadmium sulfide and poly(3-hexylthiophene) co-sensitizers10.3390/polym9100467 ↗
2. Controlling recombination kinetics of hybrid poly-3-hexylthiophene (P3HT)/titanium dioxide solar cells by self-assembled monolayers
3. Hybrid polymer/metal oxide solar cells based on ZnO columnar structures10.1039/b602084d ↗
4. Organic solar cells with carbon nanotube network electrodes10.1063/1.2209887 ↗
5. Single-wall carbon nanotube/conjugated polymer photovoltaic devices10.1063/1.1428416 ↗
6. Single wall carbon nanotube scaffolds for photoelectrochemical solar cells. Capture and transport of photogenerated electrons10.1021/nl0627238 ↗
7. Hybrid carbon nanotubes–TiO2 photoanodes for high efficiency dye-sensitized solar cells10.1021/jp403553t ↗
8. Tunneling interlayer for efficient transport of charges in metal oxide electrodes10.1021/jacs.5b13464 ↗
9. Single-walled carbon nanotubes enhance the efficiency and stability of mesoscopic perovskite solar cells10.1021/acsami.7b04894 ↗
10. Carbon nanotubes in TiO2 nanofiber photoelectrodes for high-performance perovskite solar cells10.1002/advs.201600504 ↗
11. Improvement of photovoltaic performance of inverted hybrid solar cells by adding single-wall carbon nanotubes in poly(3-hexylthiophene)10.1016/j.mssp.2016.07.018 ↗