journal article·2021-07-01

Integrating Electromagnetic Acoustic Transducers in a Modular Robotic Gripper for Inspecting Tubular Components

Hamidreza Nemati, Fernando Alvidrez, Ankit Das, Nihar Masurkar, Manoj Rudraboina, Hamid Marvi, Ehsan Dehghan-Niri

Materials Evaluation· Volume 79· Issue 7
Publisher page

Abstract

Tubular structures are critical components in infrastructure such as power plants. Throughout their life, they are subjected to extreme conditions or suffer from defects such as corrosion and cracks. Although regular inspection of these components is necessary, such inspection is limited by safety-related risks and limited access for human inspection. Robots can provide a solution for automatic inspection. The main challenge, however, lies in integrating sensors for nondestructive evaluation with robotic platforms. As part of developing a versatile lizard-inspired tube inspector robot, in this study the authors propose to integrate electromagnetic acoustic transducers into a modular robotic gripper for use in automated ultrasonic inspection. In particular, spiral coils with cylindrical magnets are integrated into a novel friction-based gripper to excite Lamb waves in thin cylindrical structures. To evaluate the performance of the integrated sensors, the gripper was attached to a robotic arm manipulator and tested on pipes of different outer diameters. Two sets of tests were carried out on both defect-free pipes and pipes with simulated defects, including surface partial cracking and corrosion. The inspection results indicated that transmitted and received signals could be acquired with an acceptable signal-to-noise ratio in the time domain. Moreover, the simulated defects could be successfully detected using the integrated robotic sensing system.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Non-Destructive Testing Techniques · Geophysical Methods and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. ASTM, 2017, ASTM-E1774-96: Standard Guide for Electromagnetic Acoustic Transducers (EMATs), ASTM International, West Conshohocken, PA, https:/doi.org/10.1520/E1774-17
2. Chattopadhyay, P., S. Ghoshal, A. Majumder, and H. Dikshit, 2018, “Locomotion Methods of Pipe Climbing Robots: A Review,” Journal of Engineering Science and Technology Review, Vol. 11, No. 4, pp. 154–165, https://doi.org/10.25103/jestr.114.2010.25103/jestr.114.20 ↗
3. Choi, S., H. Cho, and C.J. Lissenden, 2017, “Selection of Shear Horizontal Wave Transducers for Robotic Nondestructive Inspection in Harsh Environments,” Sensors, Vol. 17, No. 1, https://doi.org/10.3390/s1701000510.3390/s17010005 ↗
4. Choi, S., H. Cho, M.S. Lindsey, and C.J. Lissenden, 2018, “Electromagnetic Acoustic Transducers for Robotic Nondestructive Inspection in Harsh Environments,” Sensors, Vol. 18, No. 1, https://doi.org/10.3390/s1801019310.3390/s18010193 ↗
5. Green, Jr., R.E., 2004, “Non-contact Ultrasonic Techniques,” Ultrasonics, Vol. 42, Nos. 1–9, pp. 9–16, https://doi.org/10.1016/j.ultras.2004.01.10110.1016/j.ultras.2004.01.101 ↗
6. Kawasaki, H., S. Murakami, H. Kachi, and S. Ueki, 2008, “Novel Climbing Method of Pruning Robot,” 2008 SICE Annual Conference, pp. 160–163, https://doi.org/10.1109/SICE.2008.465464110.1109/sice.2008.4654641 ↗
7. Kim, J.-H., J.-C. Lee, and Y.-R. Choi, 2018, “PiROB: Vision-Based Pipe-Climbing Robot for Spray-Pipe Inspection in Nuclear Plants,” International Journal of Advanced Robotic Systems, Vol. 15, No. 6, https://doi.org/10.1177/172988141881797410.1177/1729881418817974 ↗
8. Kundu, T., 2004, Ultrasonic Nondestructive Evaluation: Engineering and Biological Material Characterization, CRC Press
9. Kwon, Y.-S., and B.-J. Yi, 2012, “Design and Motion Planning of a Two-Module Collaborative Indoor Pipeline Inspection Robot,” IEEE Transactions on Robotics, Vol. 28, No. 3, pp. 681–696, https://doi.org/10.1109/TRO.2012.218304910.1109/tro.2012.2183049 ↗
10. Lee, J.-H., S. Han, J. Ahn, D.-H. Kim, and H. Moon, 2014, “Two-Module Robotic Pipe Inspection System with EMATs,” Smart Structures and Systems, Vol. 13, No. 6, pp. 1041–1063, https://doi.org/10.12989/sss.2014.13.6.104110.12989/sss.2014.13.6.1041 ↗
11. Lee, S.H., 2013, “Design of the Out-Pipe Type Pipe Climbing Robot,” International Journal of Precision Engineering and Manufacturing, Vol. 14, pp. 1559–1563, https://doi.org/10.1007/s12541-013-0210-z10.1007/s12541-013-0210-z ↗
12. Li, D., 2017, “Machine Design of Robot for Detecting Oil Pipeline,” Chemical Engineering Transactions, Vol. 62, pp. 691–696, https://doi.org/10.3303/CET1762116
13. Li, J., and J.L. Rose, 2006, “Natural Beam Focusing of Non-Axisymmetric Guided Waves in Large-Diameter Pipes,” Ultrasonics, Vol. 44, No. 1, pp. 35–45, https://doi.org/10.1016/j.ultras.2005.07.00210.1016/j.ultras.2005.07.002 ↗
14. Lissenden, C.J., S. Choi, H. Cho, A. Motta, K. Hartig, X. Xiao, S. Le Berre, S. Brennan, K. Reichard, R. Leary, B. McNelly, and I. Jovanovic, 2017, “Toward Robotic Inspection of Dry Storage Casks for Spent Nuclear Fuel,” Journal of Pressure Vessel Technology, Vol. 139, No. 3, https://doi.org/10.1115/1.403578810.1115/1.4035788 ↗
15. Liu, Z., and Y. Kleiner, 2013, “State of the Art Review of Inspection Technologies for Condition Assessment of Water Pipes,” Measurement, Vol. 46, No. 1, pp. 1–15, https://doi.org/10.1016/j.measurement.2012.05.03210.1016/j.measurement.2012.05.032 ↗
16. Ma, R.R., L.U. Odhner, and A.M. Dollar, 2013, “A Modular, Open-Source 3D Printed Underactuated Hand,” 2013 IEEE International Conference on Robotics and Automation, pp. 2737–2743, https://doi.org/10.1109/ICRA.2013.663095410.1109/icra.2013.6630954 ↗
17. Marvi, H., E. Dehghan-Niri, and M. Ilami, 2020, Systems and Methods for Robotic Sensing, Repair and Inspection, US Patent Application No. 16/844,519 (pending), filed 9 April 2020
18. Mirkhani, K., C. Chaggares, C. Masterson, M. Jastrzebski, T. Dusatko, A. Sinclair, R.J. Shapoorabadi, A. Konrad, and M. Papini, 2004, “Optimal Design of EMAT Transmitters,” NDT & E International, Vol. 37, No. 3, pp. 181–193, https://doi.org/10.1016/j.ndteint.2003.09.00510.1016/j.ndteint.2003.09.005 ↗
19. Park, S., H.D. Jeong, and Z.S. Lim, 2002, “Development of Mobile Robot Systems for Automatic Diagnosis of Boiler Tubes in Fossil Power Plants and Large Size Pipelines,” IEEE/RSJ International Conference on Intelligent Robots and Systems, Vol. 2, pp. 1880–1885, https://doi.org/10.1109/IRDS.2002.104403010.1109/irds.2002.1044030 ↗
20. Pei, C., T. Liu, H. Chen, and Z. Chen, 2018, “Inspection of Delamination Defect in First Wall with a Flexible EMAT-Scanning System,” Fusion Engineering and Design, Vol. 136, pt. A, pp. 549–553, https://doi.org/10.1016/j.fusengdes.2018.03.01810.1016/j.fusengdes.2018.03.018 ↗
21. Pierce, A.D., and H.-G. Kil, 1990, “Elastic Wave Propagation from Point Excitations on Thin-Walled Cylindrical Shells,” Journal of Vibration and Acoustics, Vol. 112, No. 3, pp. 399–406, https://doi.org/10.1115/1.293052410.1115/1.2930524 ↗
22. Qiao, J., J. Shang, and A. Goldenberg, 2013, “Development of Inchworm In-Pipe Robot Based on Self-Locking Mechanism,” IEEE/ASME Transactions on Mechatronics, Vol. 18, No. 2, pp. 799–806, https://doi.org /10.1109/TMECH.2012.218429410.1109/tmech.2012.2184294 ↗
23. Ren, B., H. Cho, and C.J. Lissenden, 2017, “A Guided Wave Sensor Enabling Simultaneous Wavenumber-Frequency Analysis for Both Lamb and Shear-Horizontal Waves,” Sensors (Basel), Vol. 17, No. 3, https://doi.org/10.3390/s1703048810.3390/s17030488 ↗
24. Roh, S., and H.R. Choi, 2005, “Differential-Drive In-Pipe Robot for Moving Inside Urban Gas Pipelines,” IEEE Transactions on Robotics, Vol. 21, No. 1, pp. 1–17, https://doi.org/10.1109/TRO.2004.83800010.1109/tro.2004.838000 ↗
25. Roh, S., D.W. Kim, J.-S. Lee, H. Moon, and H.R. Choi, 2009, “In-Pipe Robot Based on Selective Drive Mechanism,” International Journal of Control, Automation and Systems, Vol. 7, pp. 105–112, https://doi.org/10.1007/s12555-009-0113-z10.1007/s12555-009-0113-z ↗
26. Rose, J.L., 2014, Ultrasonic Guided Waves in Solid Media, Cambridge University Press, https://doi.org/10.1017/CBO978110727361010.1017/CBO9781107273610 ↗
27. Salzburger, H.-J., F. Niese, and G. Dobmann, 2012, “EMAT Pipe Inspection with Guided Waves,” Welding in the World, Vol. 56, pp. 35–43, https://doi.org/10.1007/BF0332134810.1007/bf03321348 ↗
28. Tavakoli, M., A. Marjovi, L. Marques, and A.T. de Almeida, 2008, “3DCLIMBER: A Climbing Robot for Inspection of 3D Human Made Structures,” 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 4130–4135, https://doi.org/10.1109/IROS.2008.465102410.1109/iros.2008.4651024 ↗
29. Xu, F., and X. Wang, 2008, “A Wheel-Based Cable Climbing Robot with Descending Speed Restriction,” 2008 Chinese Control and Decision Conference, pp. 1570–1575, https://doi.org/10.1109/CCDC.2008.459758110.1109/ccdc.2008.4597581 ↗