journal article·2025-04-01

Addressing Challenges for Autonomous Robotic Freeform Eddy Current Inspection Via Computer Vision on Complex Geometries

Ciaron Hamilton, Oleksii Karpenko, Mahmood Haq, Yiming Deng

Materials Evaluation· Volume 83· Issue 4
Publisher page

Abstract

Eddy current inspection is a critical method for assessing the health of metallic structures, but it requires precise probe placement to avoid signal variations caused by inconsistent liftoff. Robotic systems enable scanning of complex geometries, maintaining stable liftoff and ensuring accurate data collection. This paper presents a robotic eddy current array (ECA) inspection system that operates without CAD models, using computer vision to reconstruct the part’s surface for path planning. Inaccuracies in robot calibration and the reconstructed mesh can disrupt the probe’s precise positioning, especially in ECA scanning, where probe tilting increases liftoff variability, particularly at greater distances from the tool’s center. To address these issues, we introduce a signal processing technique that reduces the impact of mesh inaccuracies and liftoff fluctuations on the acquired ECA data. The system is validated on curved steel samples with corrosion pits, approximately 50 µm deep and ranging from 1 to 10 mm² in area. The results demonstrate the system’s effectiveness in detecting defects and its potential for integration into the NDE 4.0 framework.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Non-Destructive Testing Techniques · Welding Techniques and Residual Stresses · Industrial Vision Systems and Defect Detection

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. ASTM. 2003. ASTM B117-03: Standard Practice for Operating Salt Spray (Fog) Apparatus. ASTM International. West Conshohocken, PA. https://doi.org/10.1520/B0117-03.10.1520/B0117-03 ↗
2. Doyle, E. F. 1995. “Application of Laser-Based Profilometry to Tubing in Power Generating Utilities.” Proceedings of SPIE 2454, Nondestructive Evaluation of Aging Utilities. https://doi.org/10.1117/12.209380.10.1117/12.209380 ↗
3. Foster, E. A., G. Bolton, R. Bernard, M. McInnes, S. McKnight, E. Nicolson, C. Loukas, et al. 2022. “Automated Real-Time Eddy Current Array Inspection of Nuclear Assets.” Sensors (Basel) 22 (16): 6036. https://doi.org/10.3390/s22166036.10.3390/s22166036 ↗
4. García-Martín, J., J. Gómez-Gil, and E. Vázquez-Sánchez. 2011. “Non-Destructive Techniques Based on Eddy Current Testing.” Sensors (Basel) 11 (3): 2525–65. https://doi.org/10.3390/s110302525.10.3390/s110302525 ↗
5. Hamilton, C. 2024. “Enhanced Corrosion Analysis on Curved Steel Sheets Using Freeform Robotic ECA.” PhD diss., Michigan State University. https://doi.org/doi:10.25335/hqqm-v531.
6. Hamilton, C., O. Karpenko, L. Udpa, M. Haq, and Y. Deng. 2024. “Efficient Data Acquisition and Reconstruction for Air-Coupled Ultrasonic Robotic NDE.” Scientific Reports 14 (1): 14021. https://doi.org/10.1038/s41598-024-60393-z.10.1038/s41598-024-60393-z ↗
7. Herl, G., J. Hiller, and A. Maier. 2020. “Scanning Trajectory Optimisation Using a Quantitative Tuy-Based Local Quality Estimation for Robot-Based X-Ray Computed Tomography.” Nondestructive Testing and Evaluation 35 (3): 287–303. https://doi.org/10.1080/10589759.2020.1774579.10.1080/10589759.2020.1774579 ↗
8. Hespeler, S., H. Nemati, N. Masurkar, F. Alvidrez, H. Marvi, and E. Dehghan-Niri. 2024. “Deep Learning–Based Time-Series Classification for Robotic Inspection of Pipe Condition Using Non-Contact Ultrasonic Testing.” Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems 7 (1): 011002. https://doi.org/10.1115/1.4063694.10.1115/1.4063694 ↗
9. Kang, R., P. Guerrero, G. Probst, P. Slaets, and W. Dewulf. 2022. “Reference-Free Method for Robot CT Imaging Geometry Estimation.” Precision Engineering 78:102–13. https://doi.org/10.1016/j.precisioneng.2022.07.005.10.1016/j.precisioneng.2022.07.005 ↗
10. Lee, C., and N.-G. Cho. 2012. “Assessment of Surface Profile Data Acquired by a Stylus Profilometer.” Measurement Science & Technology 23 (10): 105601. https://doi.org/10.1088/0957-0233/23/10/105601.10.1088/0957-0233/23/10/105601 ↗
11. Mineo, C., D. Cerniglia, and A. Poole. 2022. “Autonomous Robotic Sensing for Simultaneous Geometric and Volumetric Inspection of Free-Form Parts.” Journal of Intelligent & Robotic Systems 105 (3): 54. https://doi.org/10.1007/s10846-022-01673-6.10.1007/s10846-022-01673-6 ↗
12. Morozov, M., S. G. Pierce, C. N. MacLeod, C. Mineo, and R. Summan. 2018. “Off-Line Scan Path Planning for Robotic NDT.” Measurement 122:284–90. https://doi.org/10.1016/j.measurement.2018.02.020.10.1016/j.measurement.2018.02.020 ↗
13. Mukherjee, S., R. Zhang, M. Alzuhiri, V. V. Rao, L. Udpa, and Y. Deng. 2022. “Inline Pipeline Inspection Using Hybrid Deep Learning Aided Endoscopic Laser Profiling.” Journal of Nondestructive Evaluation 41 (3): 56. https://doi.org/10.1007/s10921-022-00890-1.10.1007/s10921-022-00890-1 ↗
14. Olson, E. 2011. “AprilTag: A Robust and Flexible Visual Fiducial System.” 2011. 2011 IEEE International Conference on Robotics and Automation. Shanghai, China. https://doi.org/10.1109/ICRA.2011.5979561.10.1109/icra.2011.5979561 ↗
15. Savin, Adriana. 2024. “Today’s Possible Trail to NDE 4.0.” Catalogul Oficial al Salonului Cadet INOVA, 35. https://cadetinova.ro/documente/Supliment_Inova_24.pdf.
16. Shi, X., A. Olvera, C. Hamilton, E. Gao, J. Li, L. Utke, A. Petruska, Z. Yu, L. Udpa, Y. Deng, and H. Zhang. 2021. “AI-Enabled Robotic NDE for Structural Damage Assessment and Repair.” Materials Evaluation 79 (7): 739–51. https://doi.org/10.32548/2021.me-04214.10.32548/2021.me-04214 ↗
17. Sorkine, O., D. Cohen-Or, Y. Lipman, M. Alexa, C. Rössl, and H.-P. Seidel. 2004. “Laplacian Surface Editing.” Proceedings of the 2004 Eurographics/ACM SIGGRAPH Symposium on Geometry Processing: 175–84. https://doi.org/10.1145/1057432.1057456.10.1145/1057432.1057456 ↗
18. Tsenis, T., A. Tromaras, and V. Kappatos. 2024. “NDE Using Quadruped Robotic Platform for Renewable Energy Producing Infrastructures.” 2024 IEEE 8th Energy Conference (ENERGYCON). Doha, Qatar. https://doi.org/10.1109/ENERGYCON58629.2024.10488808.10.1109/energycon58629.2024.10488808 ↗
19. Yan, Y., J. Ren, H. Zhao, J. F. C. Windmill, W. Ijomah, J. De Wit, and J. von Freeden. 2022. “Non-Destructive Testing of Composite Fiber Materials with Hyperspectral Imaging—Evaluative Studies in the EU H2020 FibreEUse Project.” IEEE Transactions on Instrumentation and Measurement 71:1–13. https://doi.org/10.1109/TIM.2022.3155745.10.1109/tim.2022.3155745 ↗
20. Zhan, G. M., W. L. Zhong, J. L. Xing, and K. Zhong. 2015. “Hand-Held Blue Light 3D Measurement Technology and Its Application in Hot Stamping.” Advanced Materials Research 1063:362–66. https://doi.org/10.4028/www.scientific.net/AMR.1063.362.10.4028/www.scientific.net/amr.1063.362 ↗
21. Zhang, W., C. Wang, F. Xie, and H. Zhang. 2020. “Defect Imaging on Curved Surfaces Based on Flexible Eddy Current Array Sensor.” Measurement 151:107280. https://doi.org/10.1016/j.measurement.2019.107280.10.1016/j.measurement.2019.107280 ↗
22. Zhen, X., Y. Yong, X. C. Guang, X. D. Guo, L. F. Fang, and L. X. Liang. 2018. “Profile Tracking with Ultrasonic Alignment for Automatic Non-Destructive Testing of Complex Structures.” Robotics and Computer-integrated Manufacturing 49:134–42. https://doi.org/10.1016/j.rcim.2017.06.007.10.1016/j.rcim.2017.06.007 ↗