Enhanced Limited-Angle CT Imaging for Defect Detection in Wind Turbine Blade Trailing-Edge Bonding Regions
Source abstract
Abstract
Radiographic imaging is a crucial nondestructive testing (NDT) technique widely studied for wind turbine blade inspection. However, practical inspections are often constrained by equipment layout, blade geometry, and environmental factors, limiting the acquisition of projection data to finite angles, which renders traditional full-angle imaging methods impractical. Due to incomplete data collection, reconstructed images frequently exhibit artifacts, blurring, and loss of edge information, which impacts precise defect detection and quantitative analysis. Developing limited-angle imaging algorithms suitable for the rear-edge core joint area of wind turbine blades has therefore become a critical topic in this field. This study proposes a novel limited-angle imaging algorithm, termed SART-TV-DMPI (simultaneous algebraic reconstruction technique with total variation regularization and dynamic multi-threshold prior information). The method integrates dynamic multi-threshold segmentation, adaptive total variation regularization, and region-specific prior knowledge to enhance image quality and defect detectability under limited-angle conditions.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Non-Destructive Testing Techniques · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. 1. Krishnan, A., A. S. M. Al-Obaidi, and L. C. Hao. 2023. “A comprehensive review of innovative wind turbine airfoil and blade designs: Toward enhanced efficiency and sustainability.” Sustainable Energy Technologies and Assessments 60: 103511. https://doi.org/10.1016/j.seta.2023.103511.10.1016/j.seta.2023.103511 ↗
2. 2. Liu, Y., Y. Zheng, Z. Shao, T. Wei, T. Cui, and R. Xu. 2024. “Defect detection of the surface of wind turbine blades combining attention mechanism.” Advanced Engineering Informatics 59: 102292. https://doi.org/10.1016/j.aei.2023.102292.10.1016/j.aei.2023.102292 ↗
3. 3. Rajadurai, J. S., and G. Thanigaiyarasu. 2009. “Structural analysis, failure prediction, and cost analysis of alternative material for composite wind turbine blades.” Mechanics of Advanced Materials and Structures 16 (6): 467–87. https://doi.org/10.1080/15376490902782223.10.1080/15376490902782223 ↗
4. 4. Dimitrova, M., A. Aminzadeh, M. S. Meiabadi, S. S. Karganroudi, H. Taheri, and H. Ibrahim. 2022. “A survey on non-destructive smart inspection of wind turbine blades based on industry 4.0 strategy.” Applied Mechanics 3 (4): 1299–326. https://doi.org/10.3390/applmech3040075.10.3390/applmech3040075 ↗
5. 5. Rose, J. L. 2002. “A baseline and vision of ultrasonic guided wave inspection potential.” Journal of Pressure Vessel Technology 124 (3): 273–82. https://doi.org/10.1115/1.1491272.10.1115/1.1491272 ↗
6. 6. Ourak, M., B. Nongaillard, J. M. Rouvaen, and M. Ouaftouh. 1991. “Ultrasonic spectroscopy of composite materials.” NDT & E International 24 (1): 21–28. https://doi.org/10.1016/0963-8695(91)90678-V.10.1016/0963-8695(91)90678-v ↗
7. 7. Liu, Q. X., Z. H. Wang, S. G. Long, M. Cai, M. Cai, X. Wang, X. Y. Chen, and J. L. Bu. 2017. “Research on automatic positioning system of ultrasonic testing of wind turbine blade flaws.” IOP Conference Series: Earth and Environmental Science 93: 012074. https://doi.org/10.1088/1755-1315/93/1/012074.10.1088/1755-1315/93/1/012074 ↗
8. 8. Benyahia, A., A. Benammar, and A. Guessoum. 2021. “Delamination defects localization using a new time frequency algorithm based on S-transform for ultrasonic testing of wind turbine blades composite materials.” Russian Journal of Nondestructive Testing 57 (11): 976–86. https://doi.org/10.1134/S1061830921110024.10.1134/s1061830921110024 ↗
9. 9. Zhu, X., Z. Guo, Q. Zhou, Chunxiang Zhu, Tao Liu, and Binrui Wang. 2025. “Damage identification of wind turbine blades based on deep learning and ultrasonic testing.” Nondestructive Testing and Evaluation 40 (2): 508–33. https://doi.org/10.1080/10589759.2024.2324373.10.1080/10589759.2024.2324373 ↗
10. 10. Smith, B. T., G. L. Farley, J. Maiden, D. Coogan, and J. G. Moore. 1991. “Damage Assessment and Residual Compression Strength of Thick Composite Plates with Through-The-Thickness Reinforcements.” In Review of Progress in Quantitative Nondestructive Evaluation, eds. Thompson, D. O., and D. E. Chimenti, 1623–1630. Boston: Springer US. https://doi.org/10.1007/978-1-4615-3742-7_63.10.1007/978-1-4615-3742-7_63 ↗
11. 11. Fortunko, C. M., and D. W. Fitting. 1991. “Appropriate ultrasonic system components for NDE of thick polymer-composites.” In Review of Progress in Quantitative Nondestructive Evaluation, eds. Thompson, D. O., and D. E. Chimenti, 2105–2112. Boston: Springer US. https://doi.org/10.1007/978-1-4615-3742-7_126.10.1007/978-1-4615-3742-7_126 ↗
12. 12. Daniel, I. M., and S. C. Wooh. 1989. “Ultrasonic Techniques for Characterization of Manufacturing Defects in Thick Composites.” In Review of Progress in Quantitative Nondestructive Evaluation, eds. Thompson, D. O., and D. E. Chimenti, 1605–1612. Boston: Springer US. https://doi.org/10.1007/978-1-4613-0817-1_202.10.1007/978-1-4613-0817-1_202 ↗
13. 13. Wooh, S. C., and I. M. Daniel. 1990. “Enhancement techniques for ultrasonic nondestructive evaluation of composite materials.” Journal of Engineering Materials and Technology 112 (2): 175–182. https://doi.org/10.1115/1.2903304.10.1115/1.2903304 ↗
14. 14. Frankle, R. S., and D. N. Rose. 1995. “Flexible ultrasonic array system for inspecting thick composite structures.” Proceedings SPIE 2459: Nondestructive Evaluation of Aging Maritime Applications. https://doi.org/10.1117/12.212558.10.1117/12.212558 ↗
15. 15. Lu, X., K. Y. Kim, and W. Sachse. 1997. “In situ determination of elastic stiffness constants of thick composites.” Composites Science and Technology 57 (7): 753–62. https://doi.org/10.1016/S0266-3538(97)80014-0.10.1016/s0266-3538(97)80014-0 ↗
16. 16. Mouritz, A. P. 2000. “Ultrasonic and interlaminar properties of highly porous composites.” Journal of Composite Materials 34 (3): 218–39. https://doi.org/10.1177/002199830003400303.10.1106/WL60-VFNN-7WEU-4DAV ↗
17. 17. Revel, G. M., G. Pandarese, and A. Cavuto. 2013. “Advanced ultrasonic non-destructive testing for damage detection on thick and curved composite elements for constructions.” Journal of Sandwich Structures & Materials 15 (1): 5–24. https://doi.org/10.1177/1099636212456861.10.1177/1099636212456861 ↗
18. 18. Lambert, J., A. R. Chambers, I. Sinclair, and S. M. Spearing. 2012. “3D damage characterisation and the role of voids in the fatigue of wind turbine blade materials.” Composites Science and Technology 72 (2): 337–43. https://doi.org/10.1016/j.compscitech.2011.11.023.10.1016/j.compscitech.2011.11.023 ↗
19. 19. Martin, R., C. S. Baird, R. H. Giles, and C. Niezrecki. 2016. “Terahertz ISAR and x-ray imaging of wind turbine blade structures.” Proceedings SPIE 9806: Smart Materials and Nondestructive Evaluation for Energy Systems 98060I. https://doi.org/10.1117/12.2218616.10.1117/12.2218616 ↗
20. 20. Mishnaevsky Jr., L., S. Fæster, L. P. Mikkelsen, Y. Kusano, and J. I. Bech. 2020. “Micromechanisms of leading edge erosion of wind turbine blades: X‐ray tomography analysis and computational studies.” Wind Energy (Chichester, England) 23 (3): 547–62. https://doi.org/10.1002/we.2441.10.1002/we.2441 ↗
21. 21. Sattar, T. P., V. Marques, R. N. Anvo, G. G. Garrido, A. P. Kaur, P. Routledge, and K. Markham. 2022. “Climbing Robot to Perform Radiography of Wind Blades.” In Robotics for Sustainable Future (CLAWAR 2021), eds. Chugo, D., M.O. Tokhi, M. F. Silva, T. Nakamura, and K. Goher, 165–176. Springer Cham. https://doi.org/10.1007/978-3-030-86294-7_15.10.1007/978-3-030-86294-7_15 ↗
22. 22. Jespersen, K. M., and L. P. Mikkelsen. 2017. “Three dimensional fatigue damage evolution in non-crimp glass fibre fabric based composites used for wind turbine blades.” Composites Science and Technology 153: 261–72. https://doi.org/10.1016/j.compscitech.2017.10.004.10.1016/j.compscitech.2017.10.004 ↗
23. 23. Baran, I., I. Straumit, O. Shishkina, and Stepan V. Lomov. 2018. “X-ray computed tomography characterization of manufacturing induced defects in a glass/polyester pultruded profile.” Composite Structures 195: 74–82. https://doi.org/10.1016/j.compstruct.2018.04.030.10.1016/j.compstruct.2018.04.030 ↗
24. 24. Chen, X. 2020. “Fractographic analysis of sandwich panels in a composite wind turbine blade using optical microscopy and X-ray computed tomography.” Engineering Failure Analysis 111: 104475. https://doi.org/10.1016/j.engfailanal.2020.104475.10.1016/j.engfailanal.2020.104475 ↗
25. 25. Fantidis, J. G., C. Potolias, and D. V. Bandekas. 2011. “Wind turbine blade nondestructive testing with a transportable radiography system.” Science and Technology of Nuclear Installations 2011 (1): 347320. https://doi.org/10.1155/2011/347320.10.1155/2011/347320 ↗
26. 26. Jasinien, E., R. Raiutis, R. Iiteris, A. Voleiis, A. Vladiauskas, D. Mitchard, and M. Amos. 2009. “NDT of wind turbine blades using adapted ultrasonic and radiographic techniques.” Insight (Northampton) 51 (9): 477–83. https://doi.org/10.1784/insi.2009.51.9.477.10.1784/insi.2009.51.9.477 ↗
27. 27. Wang, Y., L. P. Mikkelsen, G. Pyka, and P. J. Withers. 2018. “Time-lapse helical X-ray computed tomography (CT) study of tensile fatigue damage formation in composites for wind turbine blades.” Materials (Basel) 11 (11): 2340. https://doi.org/10.3390/ma11112340.10.3390/ma11112340 ↗
28. 28. Liu, X., X. Wang, D. Zhang, and K. Qian. 2022. “Effect of voids on fatigue damage propagation in 3D5D braided composites revealed via automated algorithms using X-ray computed tomography.” International Journal of Fatigue 158: 106778. https://doi.org/10.1016/j.ijfatigue.2022.106778.10.1016/j.ijfatigue.2022.106778 ↗
29. 29. Holub, W., and U. Hassler. 2013. “XXL X-ray computed tomography for wind turbines in the lab and on site.” The NDT in Canada 2013 Conference in conjunction with the International Workshop on Smart Materials & Structures, SHM, and NDT for the Energy Industry. e-Journal of Nondestructive Testing 18 (11). https://www.ndt.net/?id=14905.10.1016/0963-8695(91)90145-s ↗
30. 30. Schumacher, D., D. Ou, C. Ghafafian, U. Zscherpel, and V. Trappe. 2019. “Wind turbine rotor blade testing by dual-energy laminography.” Proceedings of International Symposium on Digital Industrial Radiology and Computed Tomography (DIR2019): 1–13. https://www.ndt.net/?id=24743.
31. 31. Bostaph, E. 2017. “Advanced Methods of Nondestructive Inspection of Composite Structures Based on Limited Angle X-ray Computed Tomography.” Dissertation. University of Texas at Arlington. https://mavmatrix.uta.edu/mechaerospace_dissertations/261.10.4050/f-0071-2015-10262 ↗
32. 32. Krumm, M., C. Sauerwein, V. Hämmerle, R. Oster, B. Diewel, and M. Sindel. 2012. “Capabilities and application of specialized computed tomography methods for the determination of characteristic material properties of fiber composite components.” 4th Conference on Industrial Computed Tomography (iCT). e-Journal of Nondestructive Testing 17 (12). https://www.ndt.net/?id=13703.
33. 33. Sun, S., L. Lv, C. Li, J. Pan, H. Huang, X. Ren, Y. Lei, and G. Li. 2025. “Defects identification of wind turbine blades based on radiographic testing.” Nondestructive Testing and Evaluation: 1–26. https://doi.org/10.1080/10589759.2025.2490772.10.1080/10589759.2025.2490772 ↗
34. 34. Andersen, A. H., and A. C. Kak. 1984. “Simultaneous algebraic reconstruction technique (SART): A superior implementation of the ART algorithm.” Ultrasonic Imaging 6 (1): 81–94. https://doi.org/10.1177/016173468400600107.10.1177/016173468400600107 ↗
35. 35. Andersen, A. H. 1989. “Algebraic reconstruction in CT from limited views.” IEEE Transactions on Medical Imaging 8 (1): 50–55. https://doi.org/10.1109/42.20361.10.1109/42.20361 ↗
36. 36. Van de Sompel, D., and M. Brady. 2008. “A systematic performance analysis of the simultaneous algebraic reconstruction technique (SART) for limited angle tomography.” 2008 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society: 2729–2732. https://doi.org/10.1109/IEMBS.2008.4649766.10.1109/iembs.2008.4649766 ↗
37. 37. Liang, Z., Y. Guan, G. Liu, R. Bian, X. Zhang, Y. Xiong, and Y. Tian. 2013. “Reconstruction of limited-angle and few-view nano-CT image via total variation iterative reconstruction.” Proceedings SPIE 8851: X-Ray Nanoimaging: Instruments and Methods 885113: 156–162. https://doi.org/10.1117/12.2026153.10.1117/12.2026153 ↗
38. 38. Jin, X., L. Li, Z. Chen, L. Zhang, and Y. Xing. 2010. “Anisotropic total variation for limited-angle CT reconstruction.” Proceedings of the IEEE Nuclear Science Symposium & Medical Imaging Conference: 2232–2238. https://doi.org/10.1109/NSSMIC.2010.5874180.10.1109/nssmic.2010.5874180 ↗
39. 39. Zhang, W., H. Zhang, L. Wang, A. Cai, L. Li, and B. Yan. 2018. “Limited angle CT reconstruction by simultaneous spatial and Radon domain regularization based on TV and data-driven tight frame.” Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 880: 107–17. https://doi.org/10.1016/j.nima.2017.10.056.10.1016/j.nima.2017.10.056 ↗
40. 40. Siddon, R. L. 1985. “Fast calculation of the exact radiological path for a three-dimensional CT array.” Medical Physics 12 (2): 252–55. https://doi.org/10.1118/1.595715.10.1118/1.595715 ↗
41. 41. Nuyts, J., B. De Man, J. A. Fessler, W. Zbijewski, and F. J. Beekman. 2013. “Modelling the physics in the iterative reconstruction for transmission computed tomography.” Physics in Medicine and Biology 58 (12): R63–96. https://doi.org/10.1088/0031-9155/58/12/R63.10.1088/0031-9155/58/12/R63 ↗
42. 42. Christiaens, M., B. De Sutter, K. De Bosschere, J. Van Campenhout, and I. Lemahieu. 1999. “A fast, cache-aware algorithm for the calculation of radiological paths exploiting subword parallelism.” Journal of Systems Architecture 45 (10): 781–90. https://doi.org/10.1016/S1383-7621(98)000.10.1016/S1383-7621(98)00038-1 ↗