Study on Nonlinear Lamb Wave Test for Invisible Impact Damage on CFRP Laminates
Source abstract
Abstract
The impact damage imposed on carbon fiber–reinforced polymer (CFRP) materials used in aircraft fuselage may seriously affect flight safety. An ultrasonic testing method can be used to inspect for damage; however, in some cases of invisible or barely visible impact damage, linear ultrasound may not provide a clear indication of the underlying damage. Accordingly, a nonlinear Lamb wave technique was developed in this study to detect invisible impact damage (IID). First, a nonlinear Lamb wave testing platform was set, as well as damage areas with different impact energies. Second, the anisotropic propagation of Lamb waves was studied to determine the wave mode and the distribution of the transducers, and the linear parameters of the Lamb waves were determined. Last, three types of characteristic parameters of nonlinear Lamb waves were obtained for damage detection. As revealed from the results, the linear ultrasonic parameters of A0 mode Lamb waves can be applied to the detection of macro surface cracks, and the frequency shift, relative nonlinearity coefficient (RNC), and fluctuation coefficient of RNCs are highly sensitive to the detection of IID. Thus, a combination of nonlinear S0 Lamb waves and linear A0 Lamb waves can be used for IID and macro surface crack detection, respectively.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Geophysical Methods and Applications · Thermography and Photoacoustic Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Bermes, C., J.-Y. Kim, and J. Qu, 2007, “Experimental Characterization of Material Nonlinearity Using Lamb Waves,” Applied Physics Letters, Vol. 90, No. 2, pp. 2067–2073, https://doi.org/10.1063/1.243146710.1063/1.2431467 ↗
2. Broda, D., W.J. Staszewski, A. Martowicz, T. Uhl, and V.V. Silberschmidt, 2014, “Modelling of Nonlinear Crack-Wave Interactions for Damage Detec-tion based on Ultrasound—A Review,” Journal of Sound and Vibration, Vol. 333, No. 4, pp. 1097–1118, https://doi.org/10.1016/j.jsv.2013.09.03310.1016/j.jsv.2013.09.033 ↗
3. Cao, W., K. Wang, P. Zhou, X. Yang, L. Xu, M. Liu, P. Fromme, B. Pang, R. Chi, and Z. Su, 2020, “Nonlinear Ultrasonic Evaluation of Disor-deredly Clustered Pitting Damage Using an In Situ Sensor Network,” Structural Health Monitoring, Vol. 19, No. 6, pp. 1989–2006, https://doi.org/10.1177/147592172091115310.1177/1475921720911153 ↗
4. Chang, L., Z.-F. Yue, X.-L. Geng, P.-Y. Wang, and D.-Y. Li, 2015, “On the Rebound Regularity of PMI Foam Core Composite Structure Subjected to Low Energy Impact,” Journal of Experimental Mechanics, Vol. 30, No. 6, pp. 757–767, https://doi.org/10.7520/1001-4888-15-036
5. de Lima, W.J.N., and M.F. Hamilton, 2003, “Finite-Amplitude Waves in Isotropic Elastic Plates,” Journal of Sound and Vibration, Vol. 265, No. 4, pp. 819–839, https://doi.org/10.1016/S0022-460X(02)01260-910.1016/s0022-460x(02)01260-9 ↗
6. Deng, M.-X., 2006, “Characterization of Surface Properties of Layered Structures Using Nonlinear Lamb Wave Approach,” Acta Aeronauticaet Astronautica Sinica, Vol. 27, No. 4, pp. 713–719
7. Deng, M., 2003, “Analysis of Second-Harmonic Generation of Lamb Modes Using a Modal Analysis Approach,” Journal of Applied Physics, Vol. 94, No. 6, pp. 4152–4159, https://doi.org/10.1063/1.160131210.1063/1.1601312 ↗
8. He, Y., G. Tian, M. Pan, and D. Chen, 2014, “Non-destructive Testing of Low-Energy Impact in CFRP Laminates and Interior Defects in Honey-comb Sandwich Using Scanning Pulsed Eddy Current,” Composites Part B: Engineering, Vol. 59, pp. 196–203, https://doi.org/10.1016/j.compositesb.2013.12.00510.1016/j.compositesb.2013.12.005 ↗
9. Kim, J., D.-G. Song, and K.-Y. Jhang, 2017, “A Method to Estimate the Absolute Ultrasonic Nonlinearity Parameter from Relative Measurements,” Ultrasonics, Vol. 77, pp. 197–202, https://doi.org/10.1016/j.ultras.2017.02.01310.1016/j.ultras.2017.02.013 ↗
10. Koshti, A.M., 2018, “X-ray Ray Tracing Simulation and Flaw Parameters for Crack Detection,” SPIE Proceedings Vol. 10600: Health Monitoring of Structural and Biological Systems XII, https://doi.org/10.1117/12.228678410.1117/12.2286784 ↗
11. Li, W., Y. Cho, and J.D. Achenbach, 2012, “Detection of Thermal Fatigue in Composites by Second Harmonic Lamb Waves,” Smart Materials and Structures, Vol. 21, No. 8, https://doi.org/10.1088/0964-1726/21/8/08501910.1088/0964-1726/21/8/085019 ↗
12. Liu, S., F. Liu, J. Shi, L. Li, J. Bai, and X. Liu, 2013, “High Resolution Ultrasonic Imaging Evaluation and Behavior Analysis of Impact Damages in Composites,” Journal of Mechanical Engineering, Vol. 49, No. 22, pp. 16–2310.3901/jme.2013.22.016 ↗
13. Mandal, D.D., and S. Banerjee, 2019, “Identification of Breathing Type Disbonds in Stiffened Panels Using Non-linear Lamb Waves and Built-In Circular PWT Array,” Mechanical Systems and Signal Processing, Vol. 117, pp. 33–51, https://doi.org/10.1016/j.ymssp.2018.07.04010.1016/j.ymssp.2018.07.040 ↗
14. Maslouhi, A., 2011, “Fatigue Crack Growth Monitoring in Aluminum Using Acoustic Emission and Acousto-ultrasonic Methods,” Structural Control and Health Monitoring, Vol. 18, No. 7, pp. 790–806, https://doi.org/10.1002/stc.47810.1002/stc.478 ↗
15. Masurkar, F., P.W. Tse, and N. Yelve, 2018, “Investigating the Critical Aspects of Evaluating the Material Nonlinearity in Metal Plates Using Lamb Waves: Theoretical and Numerical Approach,” Applied Acoustics, Vol. 140, pp. 301–314, https://doi.org/10.1016/j.apacoust.2018.06.01510.1016/j.apacoust.2018.06.015 ↗
16. Patra, S., H. Ahmed, M. Saadatzi, and S. Banerjee, 2019, “Evidence of Dissipative and Growing Nonlinearity in Lamb Waves Due to Stress-Relaxation and Material Degradation in Composites,” Ultrasonics, Vol. 96, pp. 224–231, https://doi.org/10.1016/j.ultras.2019.01.00210.1016/j.ultras.2019.01.002 ↗
17. Pengfei, Z., and J. Haibo, 2014, “Stacking Sequence Design of Composite Thin-Walled Structure based on Low Energy Impact Damage Resistance,” Acta Materiae Compositae Sinica, Vol. 31, No. 1, pp. 18–25
18. Wang, Q., Q. Hu, J. Qiu, C. Pei, X. Li, and H. Zhou, 2020, “Using Differential Spread Laser Infrared Thermography to Detect Delamination and Impact Damage in CFRP,” Infrared Physics and Technology, Vol. 106, https://doi.org/10.1016/j.infrared.2020.10328210.1016/j.infrared.2020.103282 ↗
19. Wang, Y., R. Guan, and Y. Lu, 2017, “Nonlinear Lamb Waves for Fatigue Damage Identification in FRP-Reinforced Steel Plates,” Ultrasonics, Vol. 80, pp. 87–95, https://doi.org/10.1016/j.ultras.2017.05.00410.1016/j.ultras.2017.05.004 ↗
20. Wei, Q., L. Zhu, J. Zhu, L. Zhuo, W. Hao, and W. Xie, 2020, “Characterization of Impact Fatigue Damage in CFRP Composites Using Nonlinear Acoustic Resonance Method,” Composite Structures, Vol. 253, https://doi.org/10.1016/j.compstruct.2020.11280410.1016/j.compstruct.2020.112804 ↗
21. Yao, M., X. Hemin, and D. Zihua, 2013, “The Research of Nondestructive Testing Technology with Composite Material Internal Defect Based on the Microwave Technology,” Materials Reports, Vol. 27, No. S2, pp. 61–63, 71
22. Zhang, K., W. Tang, and X. Ran, 2019, “Constitutive Relationship of Anisotropic CFRP Material and its Application in Planar Plate Impact Simulation,” Journal of Vibration and Shock, Vol. 38, No. 22, pp. 101–106, 129
23. Zhao, Y., F. Li, P. Cao, Y. Liu, J. Zhang, S. Fu, J. Zhang, and N. Hu, 2017, “Generation Mechanism of Nonlinear Ultrasonic Lamb Waves in Thin Plates with Randomly Distributed Micro-cracks,” Ultrasonics, Vol. 79, pp. 60–67, https://doi.org/10.1016/j.ultras.2017.04.00410.1016/j.ultras.2017.04.004 ↗