journal article·2022-05-01

Methodological Aspects for Quality Control and Ultrasound Inspection Tests on Retaining Walls

Rodrigo Rogerio Cerqueira Da Silva, Raquel Goncalves, Cinthya Bertoldo

Materials Evaluation· Volume 80· Issue 5
Publisher page

Abstract

Retaining walls are important structures for stabilizing slopes next to buildings. As with any structure, the parts used in retaining walls need to undergo periodic evaluation; as such, it is important to study different inspection techniques and methodologies. Ultrasonic testing has been used for material classification and quality control of the structural parts of various materials, including reinforced concrete. This study aims to evaluate the inspection of a retaining wall made with a lock and load system using ultrasonic pulse velocity. We considered the type of measurement, type of transducer, frequency of the transducer, coupling of the transducer on the inspected part, and distance between the transducers for the indirect measurements. The 45 kHz frequency was the most suitable for inspections before installation. It was found that the exponential surface transducer without coupling holes was the only one that allowed us to distinguish the plates by their velocity. For feasible field tests, the ratio between the indirect and direct velocity was 0.60. A distance of 300 mm between the transducers was the most suitable for indirect tests.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Structural Health Monitoring Techniques · Ultrasonics and Acoustic Wave Propagation · Geotechnical Engineering and Underground Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. ABNT, 2013, NBR 8802: Concreto endurecido – determinação da velocidade de propagação da onda ultrassônica, Brazilian Association of Technical Standards, Rio de Janeiro
2. ABNT, 2015, NBR 5738: Concreto – procedimento para moldagem e cura de corpos de prova, Brazilian Association of Technical Standards, Rio de Janeiro
3. ABNT, 2018, NBR 16697: Cimento Portland – Requisitos, Brazilian Association of Technical Standards, Rio de Janeiro
4. ACI Committee 228, 2013, ACI PRC-228.2-13: Report on Nondestructive Test Methods for Evaluation of Concrete in Structures, American Concrete Institute, Farmington Hills, MI10.14359/51686889 ↗
5. Adamatti, D.S., A. Lorenzi, J.A. Chies, and L.C.P. Silva Filho, 2016, “Análi se de estruturas de concreto armado através da velocidade de propagação do pulso ultrassônico: estudo de parâmetros tecnológicos intervenientes,” IBRACON Structures and Materials Journal, Vol. 10, No. 2, https://doi.org/10.1590/S1983-4195201700020000610.1590/s1983-41952011000500008 ↗
6. Ali, M., A. Liu, H. Sou, and N. Chouw, 2012, “Mechanical and Dynamic Properties of Coconut Fibre Reinforced Concrete,” Construction and Building Materials, Vol. 30, pp. 814–825, https://doi.org/10.1016/j.conbuildmat.2011.12.06810.1016/j.conbuildmat.2011.12.068 ↗
7. Anugonda, P., J.S. Wiehn, and J.A. Turner, 2001, “Diffusion of Ultrasound in Concrete,” Ultrasonics, Vol. 39, No. 6, pp. 429–435, https://doi.org/10.1016S0041-624X(01)00077-410.1016/s0041-624x(01)00077-4 ↗
8. ASTM, 2016, ASTM C597-16: Standard Test Method for Pulse Velocity through Concrete, ASTM International, West Conshohocken, PA, https://doi.org/10.1520/C0597-1610.1520/C0597-16 ↗
9. Azreen, M.N., I.M. Pauzi, I. Nasharuddin, M.M. Haniza, J. Akasyah, A.D. Karsono, and V.Y. Lei, 2016, “Prediction of Concrete Compression Strength Using Ultrasonic Pulse Velocity,” AIP Conference Proceedings, Vol. 1704, No. 1, https://doi.org/10.1063/1.494009210.1063/1.4940092 ↗
10. Bautz, R.S., G. Macioski, S.L. Weber, and A.R. Moreira, 2014, Análise da qualidade do concreto em pilares de viadutos por meio de ensaios não destrutivos para fins de reabilitação,” 1º Congresso brasileiro de patologia das fundações, Foz do Iguaçu – Paraná10.4322/cbpat.2020.022 ↗
11. Benjamim, C.V.S., 2006, “Avaliação experimental de protótipos deestruturas de contenção em solo reforçado com geotêxtil,” PhD thesis, University of São Paulo, Brazil, https://doi.org/10.11606/T.18.2006.tde-18082006-11020710.11606/t.18.2006.tde-18082006-110207 ↗
12. Blitz, J., and G. Simpson, 1996, Ultrasonic Methods of Non-destructive Testing, Chapman & Hall10.1007/978-94-011-5818-3 ↗
13. Bond, L.J., W.F. Kepler, and D.M. Frangopol, 2000, “Improved Assessment of Mass Concrete Dams Using Acoustic Travel Time Tomography, Part I — Theory,” Construction and Building Materials, Vol. 14, No. 3, pp. 133–146, https://doi.org/10.1016/S0950-0618(00)00014-310.1016/s0950-0618(00)00014-3 ↗
14. Briones-Rocha, A.I.C., 2017, “Identificação de patologias em vigas de concreto armado utilizando inspeção por ultrassom,” Dissertação de Mestrado, Unicamp-Universidade Estadual de Campinas10.47749/t/unicamp.2017.990159 ↗
15. Bucur, V., 2006, Acoustics of Wood, Springer10.1007/3-540-30594-7 ↗
16. Bungey, J.H., S.G. Millard, and M.G. Grantham, 2006, Testing of Concrete in Structures, 4th ed., Taylor & Francis10.1201/9781482264685 ↗
17. Camara, L.A., M. Wons, I.C.A. Esteves, and R.A. Medeiros-Junior, 2019, “Monitoring the Self-Healing of Concrete from the Ultrasonic Pulse Velocity,” Journal of Composites Science, Vol. 3, No. 1, p. 16, https://doi.org/10.3390/jcs301001610.3390/jcs3010016 ↗
18. Carcaño, R.S., and J.B. Pereyra, 2003, “The Influence of the Physical Properties of Aggregates on the Ultrasound Pulse Technique in Predicting the Compressive Strength of Concrete,” Revista Técnica de la Facultad de Ingeniería, Universidad del Zulia, Vol. 26, No. 1
19. CEN, 2021, EN 12504-4: Testing Concrete in Structures – Part 4: Determination of Ultrasonic Pulse Velocity, European Committee for Standardization, Brussels
20. Chaix, J.F., C. Ack-Baraly, V. Garnier, and J. Salin, 2011, “Etude de la propagation des ondes de volume et de surface dans du béton,” Les COFREND
21. 2011, National NDT Seminar & Exhibition, 24–27 May, Dunkerque, France
22. Chotard, T., N. Gimet-Breart, A. Smith, D. Fargeot, J.P. Bonnet, and C. Gault, 2001, “Application of Ultrasonic Testing to Describe the Hydration of Calcium Aluminate Cement at the Early Age,” Cement and Concrete Research, Vol. 31, No. 3, pp. 405–412, https://doi.org/10.1016/S0008‑8846(00)00446-410.1016/s0008-8846(00)00446-4 ↗
23. Cruz, R., L.A. Quintero, and J. Herrera, 2014, “Evaluación del efecto de barras de refuerzo en concreto sobre las medidas de velocidad de pulso ultrasónico (VPU),” Revista Colombiana de Materiales, No. 5, pp. 107–11310.14483/udistrital.jour.tecnura.2014.4.a08 ↗
24. Ferreira, G., 2011, “Estudo sobre fatores influentes nos resultados de ensaios não destrutivos em concreto endurecido,” Dissertação (Mestrado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia-MG10.14393/19834071.2013.21693 ↗
25. Giacon, Jr., M., 2009, “Propagação de ondas de ultra-som em prototipos de postes tubulares de concreto armado,” Dissertação de Mestrado, Universidade Estadual de Campinas10.47749/t/unicamp.2009.442694 ↗
26. Haach, V.G., and F.C. Ramirez, 2016, “Qualitative Assessment of Concrete by Ultrasound Tomography,” Construction and Building Materials, Vol. 119, pp. 61–70, https://doi.org/10.1016/j.conbuildmat.2016.05.05610.1016/j.conbuildmat.2016.05.056 ↗
27. Haach, V.G., and L.M. Juliani, 2017, “Possibilities of Using Ultrasound for the Technological Control of Concrete of Hollow-Core Slabs,” Construction and Building Materials, Vol. 133, pp. 409–415, https://doi.org/10.1016/j.conbuildmat.2016.12.12110.1016/j.conbuildmat.2016.12.121 ↗
28. Hager, I., H. Carré, and K. Krzemien, 2013, “Damage Assessment of Concrete Subjected to High Temperature by means of the Ultrasonic Pulse Velocity – UPV Method,” Studies and Researches, Vol. 32, No. 1, pp. 197–211
29. In, C.-W., J.-Y. Kim, K.E. Kurtis, and L.J. Jacobs, 2009, “Characterization of Ultrasonic Rayleigh Surface Waves in Asphaltic Concrete,” NDT & E International, Vol. 42, No. 7, pp. 610–617, https://doi.org/10.1016/j.ndteint.2009.04.00710.1016/j.ndteint.2009.04.007 ↗
30. Lee, H.K., K.M. Lee, Y.H. Kim, H. Yim, and D.B. Bae, 2004, “Ultrasonic In-Situ Monitoring of Setting Process of High-Performance Concrete,” Cement and Concrete Research, Vol. 34, No. 4, pp. 631–640, https://doi.org/10.1016/j.cemconres.2003.10.01210.1016/j.cemconres.2003.10.012 ↗
31. Malhotra, V.M, and N.J. Carino, 2003, Handbook on Nondestructive Testing of Concrete, 2nd ed., CRC Press10.1201/9781420040050 ↗
32. Masi, A., and M. Vona, 2010, “Experimental and Numerical Evaluation of the Fundamental Period of Undamaged and Damaged RC Framed Buildings,” Bulletin of Earthquake Engineering, Vol. 8, pp. 643–656, https://doi.org/10.1007/s10518-009-9136-310.1007/s10518-009-9136-3 ↗
33. Medeiros, A., 2007, “Aplicação do ultra-som na estimativa da profundidade de fendas superficiais e na avaliação da eficácia de injeções em elementos de concreto armado,” Dissertação de Mestrado em Engenharia Civil da Universidade Federal de Santa Catarina – UFSC10.20873/uft.2525-4863.2017v2n3p965 ↗
34. Mohammed, T.U., and M.N. Rahman, 2016, “Effect of Types of Aggregate and Sand-to-Aggregate Volume Ratio on UPV in Concrete,” Construction and Building Materials, Vol. 125, pp. 832–841, https://doi.org/10.1016/j.conbuildmat.2016.08.10210.1016/j.conbuildmat.2016.08.102 ↗
35. Murata, O., M. Tateyama, and F. Tatsuoka, 1990, “Steep Reinforced with a Planar Geotextile Having a Rigid Facing,” Fourth International Conference on Geotextiles, Geomembranes and Related Products, The Hauge, Netherlands, Vol. 1
36. Naik, T.R., V.M. Malhotra, and J.S. Popovics, 2004, “The Ultrasonic Pulse Velocity Method,” Handbook on Nondestructive Testing of Concrete, pp. 182–20010.1201/9781420040050.ch8 ↗
37. Paiva, M.A.C., 2017, “Análise das propriedades mecânicas nas primeiras idades do concreto de lajes alveolares utilizando o ensaio de ultrassom,” Tese de doutorado, Universidade de São Paulo, https://doi.org/10.11606/D.18.2018.tde-08122017-10290010.11606/d.18.2018.tde-08122017-102900 ↗
38. Pardo, F., and E. Perez, 2010, “Evaluación del efecto de las barras de refuerzo del concreto sobre las medidas de velocidad de pulso ultrasónico,” Bucaramanga, Colombia, Universidad Industrial de Santander10.33304/revinv.v11n1-2018011 ↗
39. Petro, Jr., J.T., and J. Kim, 2012, “Detection of Delamination in Concrete Using Ultrasonic Pulse Velocity Test,” Construction and Building Materials, Vol. 26, No. 1, pp. 574–582, https://doi.org/10.1016/j.conbuildmat.2011.06.06010.1016/j.conbuildmat.2011.06.060 ↗
40. Planès, T., and E. Larose, 2013, “A Review of Ultrasonic Coda Wave Interferometry in Concrete,” Cement and Concrete Research, Vol. 53, pp. 248–255, https://doi.org/10.1016/j.cemconres.2013.07.00910.1016/j.cemconres.2013.07.009 ↗
41. Polimeno, M.R., I. Roselli, V.A.M. Luprano, M. Mongelli, A. Tati, and G. de Canio, 2018, “A Non-destructive Testing Methodology for Damage Assessment of Reinforced Concrete Buildings after Seismic Events,” Engineering Structures, Vol. 163, pp. 122–136, https://doi.org/10.1016/j.engstruct.2018.02.05310.1016/j.engstruct.2018.02.053 ↗
42. Puncinotti, R., L. Hinterholz, A. D’elia, and R.A. De Loenzo, 2007, “Influence of Steel Reinforcement on Ultrasonic Pulses Velocity,” 4th International Conference on NDT, 11–14 October, Chania, Crete, Greece
43. Qixian, L., and J.H. Bungey, 1996, “Using Compression Wave Ultrasonic Transducers to Measure the Velocity of Surface Waves and Hence Determine Dynamic Modulus of Elasticity for Concrete,” Construction and Building Materials, Vol. 10, No. 4, pp. 237–242, https://doi.org/10.1016/0950-0618(96)00003-710.1016/0950-0618(96)00003-7 ↗
44. RILEM, 1972, NDT 1 - Testing of Concrete by the Ultrasonic Method, International Union of Laboratories and Experts in Construction Materials, Systems and Structures, https://doi.org/1617/2351580117.029
45. Rheinheimer, V., 2007, “Utilização de ensaios não destrutivos no controle tecnológico de execução de pavimentos de concreto tipo Fast Track,” Dissertação de Mestrado, Universidade Federal de SCatarina10.11606/d.3.2011.tde-01112011-123905 ↗
46. Royer, D., and E. Dieulesaint, 2000, Elastic Waves in Solids II: Generation, Acousto-Optic Interaction, Applications, Springer Berlin, Heidelberg
47. Sahuinco, C.H.M., 2011, “Utilização de métodos não destrutivos e semi destrutivos na avaliação de pontes de concreto,” Dissertação de Mestrado, Universidade de São Paulo, https://doi.org/10.11606/D.3.2011.tde-01112011-12390510.11606/d.3.2011.tde-01112011-123905 ↗
48. Shiotani, T., D.G. Aggelis, and O. Makishima, 2009, “Global Monitoring of Large Concrete Structures Using Acoustic Emission and Ultrasonic Techniques: Case Study,” Journal of Bridge Engineering, Vol. 14, No. 3, pp. 188–19210.1061/(asce)1084-0702(2009)14:3(188) ↗
49. Smith, A., T. Chotard, N. Gimet-Breart, and D. Fargeot, 2002, “Correlation between Hydration Mechanism and Ultrasonic Measurements in an Aluminous Cement: Effect of Setting Time and Temperature on the Early Hydration,” Journal of the European Ceramic Society, Vol. 22, No. 12, pp. 1947–1958, https://doi.org/10.1016/S0955-2219(01)00530-110.1016/s0955-2219(01)00530-1 ↗
50. Solís-Carcaño, R., and E.I. Moreno, 2008, “Evaluation of Concrete Made with Crushed Limestone Aggregate based on Ultrasonic Pulse Velocity,” Construction and Building Materials, Vol. 22, No. 6, pp. 1225–1231, https://doi.org/10.1016/j.conbuildmat.2007.01.01410.1016/j.conbuildmat.2007.01.014 ↗
51. Tatarinov, A., A. Rumjancevs, and V. Mironovs, 2019, “Assessment of Cracks in Pre-stressed Concrete Railway Sleepers by Ultrasonic Testing,” Procedia Computer Science, Vol. 149, pp. 324–330, https://doi.org/10.1016/j.procs.2019.01.14310.1016/j.procs.2019.01.143 ↗
52. Tatsuoka, F., 1993, Keynote Lecture: Roles of Facing Rigidity in Soil Reinforcing, Ochiai, Hayashi & Otani (EDS), Earth Reinforcement Practice, A.A. Balkema, Rotterdam, pp. 831–870
53. Villain, G., V. Garnier, Z.M. Sbartaï, X. Derobert, and J.-P. Balayssac, 2018, “Development of a Calibration Methodology to Improve the On-Site Non-destructive Evaluation of Concrete Durability Indicators,” Materials and Structures, Vol. 51, https://doi.org/10.1617/s11527-018-1165-410.1617/s11527-018-1165-4 ↗
54. Watanabe, S., K. Hishikawa, K. Kamae, and S. Namiki, 2018, “Study on Estimation of Compressive Strength of Concrete in Structure Using Ultrasonic Method,” Japan Architectural Review, Vol. 1, No. 1, pp. 87–95, https://doi.org/10.1002/2475-8876.100910.1002/2475-8876.1009 ↗
55. Ye, G., P. Lura, K. van Breugel, and A.L.A. Fraaij, 2004, “Study on the Development of the Microstructure in Cement-Based Materials by means of Numerical Simulation and Ultrasonic Pulse Velocity Measurement,” Cement and Concrete Composites, Vol. 26, pp. 491–497, https://doi.org/10.1016/S0958-9465(03)00081-710.1016/s0958-9465(03)00081-7 ↗
56. Yu, T., J.-F. Chaix, L. Audibert, D. Komatitsch, V. Garnier, and J.-M. Hénault, 2019, “Simulations of Ultrasonic Wave Propagation in Concrete based on a Two-Dimensional Numerical Model Validated Analytically and Experimentally,” Ultrasonics, Vol. 92, pp. 21–34, https://doi.org/10.1016/j.ultras.2018.07.01810.1016/j.ultras.2018.07.018 ↗