Visualizing Defects of Irregular Weld Seams Based on MultiMode TFM Detection
Source abstract
Abstract
An image reconstruction method based on the multimode total focusing method (MTFM) is proposed to overcome the limitations of traditional total focusing method (TFM) imaging in detecting tiny discontinuities at complex locations. We conducted MTFM detection and TFM image reconstruction experiments for irregular welds containing multiple discontinuities. In an experiment using four 1 mm diameter manufactured defects fabricated on two aluminum alloy welded test blocks, we achieved two significant contributions. First, we accurately detected small discontinuities by combining CIVA simulation with robotic arm assistance. Second, we proposed fusion factor coefficients for TFM image processing, which considered different modal weights for image fusion and de-noising, thereby preserving the integrity of the fused images. Our experimental results demonstrate that the reconstructed TFM images effectively represented all defect information. Compared with other modal TFM images with the highest signal-to-noise ratio (SNR), the amplitude-corrected optimized TFM image exhibits an improved SNR of 51.95% without losing defect information.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Non-Destructive Testing Techniques · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. 1. Mucci, R. A. 1984. “A Comparison of Efficient Beam Forming Algorithms.” IEEE Transactions on Acoustics, Speech, and Signal Processing 32 (3): 548–58. https://doi.org/10.1109/TASSP.1984.1164359.10.1109/tassp.1984.1164359 ↗
2. 2. Holmes, C., B. W. Drinkwater, and P. D. Wilcox. 2005. “Post-processing of the full matrix of ultrasonic transmit-receive array data for nondestructive evaluation.” NDT & E International 38 (8): 701–11. https://doi.org/10.1016/j.ndteint.2005.04.002.10.1016/j.ndteint.2005.04.002 ↗
3. 3. Hunter, A. J., B. W. Drinkwater, and P. D. Wilcox. 2008. “The wave number algorithm for full matrix imaging using an ultrasonic array.” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control 55 (11): 2450–62. https://doi.org/10.1109/TUFFC.952.10.1109/tuffc.952 ↗
4. 4. Velichko, A., and P. D. Wilcox. 2009. “Reversible back-propagation imaging algorithm for post processing of ultrasonic array data.” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control 56 (11): 2492–503. https://doi.org/10.1109/TUFFC.2009.1336.10.1109/tuffc.2009.1336 ↗
5. 5. Hunter, A. J., B. W. Drinkwater, and P. D. Wilcox. 2010. “Autofocusing ultrasonic imagery or non-destructive testing and evaluation of specimens with complicated geometries.” NDT & E International 43 (2): 78–85. https://doi.org/10.1016/j.ndteint.2009.09.001.10.1016/j.ndteint.2009.09.001 ↗
6. 6. Li, C., D. Pain, P. D. Wilcox, and B. W. Drinkwater. 2013. “Imaging composite material using ultrasonic arrays.” NDT & E International 53:8–17. https://doi.org/10.1016/j.ndteint.2012.07.006.10.1016/j.ndteint.2012.07.006 ↗
7. 7. Nowicki, A., and B. Gambin. 2014. “Ultrasonic synthetic apertures.” Archives of Acoustics 39 (4): 427–38. https://doi.org/10.2478/aoa-2014-0047.10.2478/aoa-2014-0047 ↗
8. 8. Wilcox, P. D., C. Holmes, and B. W. Drinkwater. 2007. “Advanced reflector characterization with ultrasonic phased arrays in NDE applications.” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control 54 (8): 1541–50. https://doi.org/10.1109/TUFFC.2007.424.10.1109/tuffc.2007.424 ↗
9. 9. Holmes, C., B. W. Drinkwater, and P. D. Wilcox. 2008. “Advanced post-processing for scanned ultrasonic arrays: Application to defect detection and classification in nondestructive evaluation.” Ultrasonics 48 (6-7): 636–42. https://doi.org/10.1016/j.ultras.2008.07.019.10.1016/j.ultras.2008.07.019 ↗
10. 10. Zhang, J., B. W. Drinkwater, and P. D. Wilcox. 2008. “Defect characterization using an ultrasonic array to measure the scattering coefficient matrix.” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control 55 (10): 2254–65. https://doi.org/10.1109/TUFFC.924.10.1109/tuffc.924 ↗
11. 11. Zhang, J., B. W. Drinkwater, P. D. Wilcox, and A. J. Hunter. 2010. “Defect detection using ultrasonic arrays: The multi-mode total focusing method.” NDT & E International 43 (2): 123–33. https://doi.org/10.1016/j.ndteint.2009.10.001.10.1016/j.ndteint.2009.10.001 ↗
12. 12. Zhang, J., T. Barber, A. Nixon, and P. Wilcox. 2017. “Investigation into distinguishing between small volumetric and crack-like defects using multi-view total focusing method images.” AIP Conference Proceedings 1806. https://doi.org/10.1063/1.4974590.10.1063/1.4974590 ↗
13. 13. Saini, A., M. V. Felice, Z. Fan, and C. J. L. Lane. 2020. “Optimisation of the half-skip total focusing method (HSTFM) parameters for sizing surface-breaking cracks.” NDT & E International 116: 102365. https://doi.org/10.1016/j.ndteint.2020.102365.10.1016/j.ndteint.2020.102365 ↗
14. 14. Portzgen, N., D. Gisolf, and G. Blacquiere. 2007. “Inverse wave field extrapolation: A different NDI approach to imaging defects.” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control 54 (1): 118–27. https://doi.org/10.1109/TUFFC.2007.217.10.1109/tuffc.2007.217 ↗
15. 15. Haines, H., L. Hörchens, and P. Tomar. 2016. “Identifying and sizing axial seam weld flaws in ERW pipe seams and SCC in the pipe body using ultrasonic imaging.” Proceedings of the 2016 11th International Pipeline Conference. Vol. 1: Pipelines and Facilities Integrity. https://doi.org/10.1115/IPC2016-64069.10.1115/ipc2016-64069 ↗
16. 16. Jin, S., C. Wang, S. Liu, and L. Lin. 2018. “Simulation on qualitative detection of defects with multi-mode total focusing method.” 2018 IEEE Far East NDT New Technology & Application Forum. Xiamen, China.10.1109/fendt.2018.8681953 ↗
17. 17. Jin, S. J., C. F. Liu, S. Q. Shi, Z. Luo, C. Wang, and L. Lin. 2019. “Comparison of morphology characterization for regular cracks with multi-mode total focusing method.” 2019 IEEE Far East NDT New Technology & Application Forum. Qingdao, China. https://doi.org/10.1109/FENDT47723.2019.8962560.10.1109/fendt47723.2019.8962560 ↗
18. 18. Holloway, P., and E. Ginzel. 2021. “TFMiTM: Using intermodal analysis to improve TFM imaging.” The e-Journal of Nondestructive Testing.
19. 19. Iakovleva, E., S. Chatillon, P. Bredif, and S. Mahaut. 2014. “Multi-mode TFM imaging with artifacts filtering using CIVA UT forwards models.” AIP Conference Proceedings 1581:72–79. https://doi.org/10.1063/1.4864804.10.1063/1.4864804 ↗