journal article·2023-04-01

Detectability of Small True-T Hole Image Quality Indicators by Digital Radiographic Techniques

Paul Adams, Anita Gregorian, Shant Kenderian, Scott Sitzman

Materials Evaluation· Volume 81· Issue 4
Publisher page

Abstract

Image quality indicators (IQIs) are used to ensure quality in radiography. The requirements for hole-type IQIs have changed from MIL-STD-453-C (US DOD 1984) to ASTM E1742 and E1025 (ASTM 2018a, 2018b). For materials thinner than 0.50 in., the 2-2T hole does not represent 2% sensitivity. E1025 introduced true-T hole IQIs, where the 2-2T hole represents 2% sensitivity. Stainless steel true-T hole IQIs were fabricated using drills and a plasma-focused ion beam instrument. They were imaged using digital radiography (DR), computed radiography, and X-ray film to determine the limit of their visibility. DR was able to detect holes on the order of 2 to 3 pixels in diameter. All three techniques were able to detect the 2T hole in the number 4 IQI while DR was able to detect it in the number 3 IQI. These hole sizes are near the limit where geometric magnification would be required. The better sensitivity of DR is probably a result of being able to minimize fixed structural noise. Presently, for materials thinner than 0.50 in., there is the option to use IQIs defined by either E1742 Annex A1 or E1025. It is recommended that inspection procedures require a particular sensitivity percent that would necessitate the use of a specific IQI.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced X-ray and CT Imaging · Welding Techniques and Residual Stresses · Digital Radiography and Breast Imaging

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. AIA/NAS. 2015. NAS1514: Radiographic standard for classification of fusion weld discontinuities. Aerospace Industries Association. Arlington, VA.
2. ASTM. 2014. ASTM E1817-08: Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs). ASTM International. West Conshohocken, PA.10.1520/e1817 ↗
3. ASTM. 2016. ASTM E2446-16: Standard Practice for Manufacturing Characterization of Computed Radiography Systems. ASTM International. West Conshohocken, PA. https://doi.org/10.1520/E2446-16.10.1520/E2446-16 ↗
4. ASTM. 2017a. ASTM E2033-17: Standard Practice for Radiographic Examination Using Computed Radiography (Photostimulable Luminescence Method). ASTM International. West Conshohocken, PA. https://doi.org/10.1520/E2033-1710.1520/E2033-17 ↗
5. ASTM. 2017b. ASTM E2736-17: Standard Guide for Digital Detector Array Radiography. ASTM International. West Conshohocken, PA.
6. ASTM. 2018a. ASTM E1025-18: Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology. ASTM International. West Conshohocken, PA. https://doi.org/10.1520/E1025-18.10.1520/e1025 ↗
7. ASTM. 2018b. ASTM E1742/E1742M-18: Standard Practice for Radiographic Examination. ASTM International. West Conshohocken, PA. https://doi.org/10.1520/E1742_E1742M-18.10.1520/E1742_E1742M-18 ↗
8. ASTM. 2018c. ASTM E2698-18e1: Standard Practice for Radiographic Examination Using Digital Detector Arrays. ASTM International. West Conshohocken, PA.
9. ASTM. 2018d. ASTM E2737-10(2018): Standard Practice for Digital Detector Array Performance Evaluation and Long-Term Stability. ASTM International. West Conshohocken, PA. https://doi.org/10.1520/E2737-10R18.10.1520/E2737-10R18 ↗
10. ASTM. 2018e. ASTM E747-18: Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology. ASTM International. West Conshohocken, PA. https://doi.org/10.1520/E0747-18.10.1520/e0747-97 ↗
11. ASTM. 2020. ASTM E2445/E2445M-20: Standard Practice for Performance Evaluation and Long-Term Stability of Computed Radiography Systems. ASTM International. West Conshohocken, PA. https://doi.org/10.1520/E2445_E2445M-20.10.1520/E2445_E2445M-20 ↗
12. ASTM. 2022a. ASTM E1316-22: Standard Terminology for Nondestructive Examinations. ASTM International. West Conshohocken, PA. https://doi.org/10.1520/E1316-22.10.1520/E1316-22 ↗
13. ASTM. 2022b. ASTM E2002-22: Standard Practice for Determining Image Unsharpness and Basic Spatial Resolution in Radiography and Radioscopy. ASTM International. West Conshohocken, PA. https://doi.org/10.1520/E2002-22.10.1520/e2002-22 ↗
14. ASTM. 2022c. ASTM E2597/E2597M-22: Standard Practice for Manufacturing Characterization of Digital Detector Arrays. ASTM International. West Conshohocken, PA. https://doi.org/10.1520/E2597_E2597M-2210.1520/E2597_E2597M-22 ↗
15. AWS. 2010. AWS D17.1/D17.1M:2010: Specification for fusion welding for aerospace applications. American Welding Society. Miami, FL.
16. Baur, M., N. Uhlmann, T. Pöschel, and M. Schröter. 2019. “Correction of beam hardening in X-ray radiograms.” Review of Scientific Instruments 90 (2). https://doi.org/10.1063/1.5080540.10.1063/1.5080540 ↗
17. Ewert, U., K. Bavendiek, J. Robbins, U. Zscherpel, C. Bueno, T. Gordon, and D. Mishra. 2010. “New Compensation Principles for Enhanced Image Quality in Industrial Radiology with Digital Detector Arrays.” Materials Evaluation 68:163–68.
18. Ewert, U., U. Zscherpel, K. Bavendiek, U. Heike, and W. Meade. 2006. “New digital radiography procedure exceeds film sensitivity considerably in aerospace applications.” 9th European Conference on NDT. Berlin, Germany.
19. Ewert, U., U. Zscherpel, K. Heyne, M. Jechow, and K. Bavendiek. 2012. “Image Quality in Digital Industrial Radiology.” Materials Evaluation 70 (8): 955–64.10.1063/1.4716281 ↗
20. NASA. 2019. NASA-STD-5009B: Nondestructive evaluation requirements for fracture-critical metallic components. Washington, D.C.
21. O’Conner, D. T., and E. L. Criscuolo. 1956. “The quality of radiographic inspection.” ASTM Bulletin, ASTM International. 213:56.
22. Silva, A. S. S., D. F. Oliveira, A. S. Machado, J. R. Nascimento, and R. T. Lopes. 2014. “An evaluation of image plate characteristics that determine image quality in computed radiography.” Materials Evaluation 72:392–97.
23. US DOD. 1984. MIL-STD-453-C: Military Standard: Inspection, Radiographic, US Department of Defense. Washington, D.C.
24. US DOD. 2005. MIL-STD-2219A: Department of Defense Standard Practice: Fusion welding for aerospace applications. Washington, D.C.