journal article·2025-03-01

Acoustic Emission Monitoring of Early Hydration Processes In Cementitious Materials

Yan Wang, Yihui Su, Haitao Zhao, Na Wang

Materials Evaluation· Volume 83· Issue 3
Publisher page

Abstract

Acoustic emission (AE) technology is widely used in the study of various damage characteristics of concrete due to its high sensitivity and real-time dynamics. In this study, to investigate the relationship between cement content, the presence of aggregates in cementitious materials, and early cracking during the hydration process, an AE parameter-waveform acquisition system is used to monitor the early hydration process of concrete in real time for 72 h. The AE characteristics are analyzed using AE parameter and waveform analysis methods. Differences in AE parameters help identify the main relevant reaction components at each stage of the hydration process or in the event of damage, providing a reference basis for quality control. The results indicate that the early hydration process of cementitious materials can be divided into five stages: pre-induction, induction, acceleration, deceleration, and stabilization. It is mainly the cement particles that undergo the hydration reaction, and the higher the cement content is, the longer the reaction time. The introduction of aggregates into the pores of cementitious materials causes wave attenuation and early cracking.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Drilling and Well Engineering · Rock Mechanics and Modeling · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. 1. Aitcin, P. C. 2003. “The durability characteristics of high performance concrete: A review.” Cement and Concrete Composites 25 (4-5): 409–20. https://doi.org/10.1016/S0958-9465(02)00081-1.10.1016/s0958-9465(02)00081-1 ↗
2. 2. Lura, P., and J. Bisschop. 2004. “On the origin of eigenstresses in lightweight aggregate concrete.” Cement and Concrete Composites 26 (5): 445–52. https://doi.org/10.1016/S0958-9465(03)00072-6.10.1016/s0958-9465(03)00072-6 ↗
3. 3. Xie, Y. D., C. X. Qian, Y. G. Xu, M. Wei, and W. Du. 2022. “Effect of fine aggregate type on early-age performance, cracking analysis and engineering applications of C50 concrete.” Construction & Building Materials 323:126633. https://doi.org/10.1016/j.conbuildmat.2022.126633.10.1016/j.conbuildmat.2022.126633 ↗
4. 4. Güneyisi, E., M. Gesoglu, and E. Özbay. 2010. “Strength and drying shrinkage properties of self-compacting concretes incorporating multi-system blended mineral admixtures.” Construction & Building Materials 24 (10): 1878–87. https://doi.org/10.1016/j.conbuildmat.2010.04.015.10.1016/j.conbuildmat.2010.04.015 ↗
5. 5. Zhao, K., Y. Zhou, Q. Z. Huang, S. Yin, Y. Yan, J. Wu, L. Shen, X. Zeng, and W. Liu. 2023. “Early properties and modeling of cemented superfine tailings backfill containing sodium dodecyl sulfate: Microstructure, mechanics, and acoustics.” Mechanics of Materials 179:104567. https://doi.org/10.1016/j.mechmat.2023.104567.10.1016/j.mechmat.2023.104567 ↗
6. 6. Li, Q. C., Y. F. Fan, X. J. Li, and S. P. Shah. 2024. “Effect of nano-metakaolin on the early-age fracture properties of cement mortar.” Construction & Building Materials 446:137922. https://doi.org/10.1016/j.conbuildmat.2024.137922.10.1016/j.conbuildmat.2024.137922 ↗
7. 7. Dias, A. P. S., G. Lefever, and D. G. Aggelis. 2023. “Fresh Concrete Curing Monitoring Using Acoustic Emission.” In Proceedings of the 75th RILEM Annual Week 2021, eds. J. I. Escalante-Garcia, P. C. Borges, and A. Duran-Herrera. RW 2021. RILEM Book series, Vol. 40. Cham, Switzerland: Springer. https://doi.org/10.1007/978-3-031-21735-7_88.10.1007/978-3-031-21735-7_88 ↗
8. 8. Qin, L., H. W. Ren, B. Q. Dong, and F. Xing. 2014. “Acoustic Emission Behavior of Early Age Concrete Monitored by Embedded Sensors.” Materials (Basel) 7 (10): 6908–18. https://doi.org/10.3390/ma7106908.10.3390/ma7106908 ↗
9. 9. Bacharz, M., B. Goszczynska, and W. Trampczynski. 2015. “Analysis of Destructive Processes in Unloaded Early-age Concrete with the Acoustic Emission Method.” Procedia Engineering 108:245–53. https://doi.org/10.1016/j.proeng.2015.06.144.10.1016/j.proeng.2015.06.144 ↗
10. 10. Xu, D. Y., H. C. Chen, Y. Hu, D. Sun, P. Du, and P. Liu. 2023. “Ultrasonic monitoring and property prediction of cement hydration with novel omnidirectional piezoelectric ultrasonic transducer.” Journal of Building Engineering 72:106612. https://doi.org/10.1016/j.jobe.2023.106612.10.1016/j.jobe.2023.106612 ↗
11. 11. Hoduláková, M., L. Topolár, and B. Kucharczyková. 2019. “The Application of Acoustic Emission Technique to Monitor the Early Setting Process of Cement Pastes.” MATEC Web of Conferences. https://doi.org/10.1051/matecconf/201930304002.10.1051/matecconf/201930304002 ↗
12. 12. Iliopoulos, S. N., Y. E. Khattabi, and D. G. Aggelis. 2016. “Towards the Establishment of a Continuous Nondestructive Monitoring Technique for Fresh Concrete.” Journal of Nondestructive Evaluation 35 (3): 37. https://doi.org/10.1007/s10921-016-0355-7.10.1007/s10921-016-0355-7 ↗
13. 13. Chotard, T., D. Rotureau, and A. Smith. 2005. “Analysis of acoustic emission signature during aluminous cement setting to characterise the mechanical behaviour of the hard material.” Journal of the European Ceramic Society 25 (16): 3523–31. https://doi.org/10.1016/j.jeurceramsoc.2004.09.019.10.1016/j.jeurceramsoc.2004.09.019 ↗
14. 14. Van Den Abeele, K., W. Desadeleer, G. De Schutter, and M. Wevers. 2009. “Active and passive monitoring of the early hydration process in concrete using linear and nonlinear acoustics.” Cement and Concrete Research 39 (5): 426–32. https://doi.org/10.1016/j.cemconres.2009.01.016.10.1016/j.cemconres.2009.01.016 ↗
15. 15. Korda, E., G. G. De Schutter, and D. Aggelis. 2024. “Acoustic signatures of hydration and microcracking in early-age concrete.” Developments in the Built Environment 17:100353. https://doi.org/10.1016/j.dibe.2024.100353.10.1016/j.dibe.2024.100353 ↗
16. 16. Assi, L. N., R. Anay, D. Leaphart, V. Soltangharaei, and P. Ziehl. 2016. “Investigation of Early Geopolymerization Process of Fly Ash-Based Geopolymer Paste Using Acoustic Emission Technique.” In Proceedings of 4th International Conference on Sustainable Construction Materials and Technologies. http://www.claisse.info/2016%20papers/S286.pdf.10.18552/2016/scmt4s286 ↗
17. 17. Dzaye, E. D., G. De Schutter, and D. G. Aggelis. 2018. “Study on mechanical acoustic emission sources in fresh concrete.” Archives of Civil and Mechanical Engineering 18 (3): 742–54. https://doi.org/10.1016/j.acme.2017.12.004.10.1016/j.acme.2017.12.004 ↗
18. 18. Dzaye, E. D., G. De Schutter, and D. G. Aggelis. 2020. “Monitoring early-age acoustic emission of cement paste and fly ash paste.” Cement and Concrete Research 129:105964. https://doi.org/10.1016/j.cemconres.2019.105964.10.1016/j.cemconres.2019.105964 ↗
19. 19. Aggelis, D. G. “Classification of cracking mode in concrete by acoustic emission parameters.” 2011. Mechanics Research Communication 38: 153–157. https://doi.org/10.1016/j.mechrescom.2011.03.007.10.1016/j.mechrescom.2011.03.007 ↗
20. 20. ASTM. ASTM E1316-99a: Standard Terminology for Nondestructive Examinations. West Conshohocken, PA: ASTM International.
21. 21. Tragazikis, I. K., K. G. Dassios, D. Exarchos, P. T. Dalla, and T. E. Matikas. 2016. “Acoustic emission investigation of the mechanical performance of carbon nanotube-modified cement-based mortars.” Construction & Building Materials 122:518–24. https://doi.org/10.1016/j.conbuildmat.2016.06.095.10.1016/j.conbuildmat.2016.06.095 ↗
22. 22. Koppel, S. 2002. “Schallemissionsanalyse zur Untersuchung von Stahlbetontragwerken.” Eidgenossischen Technischen Hochschule Zürich. https://www.research-collection.ethz.ch/bitstream/handle/20.500.11850/145693/eth-24623-02.pdf.
23. 23. Pollock, A. A. 1981. “Acoustic Emission Amplitude Distributions.” International Advances in Nondestructive Testing 7: 215–239.
24. 24. Ye, G., P. Lura, K. van Breugel, and A. L. A. Fraaij. 2004. “Study on the development of the microstructure in cement-based materials by means of numerical simulation and ultrasonic pulse velocity measurement.” Cement and Concrete Composites 26 (5): 491–97. https://doi.org/10.1016/S0958-9465(03)00081-7.10.1016/s0958-9465(03)00081-7 ↗
25. 25. Thirumalaiselvi, A., and S. Sasmal. 2019. “Acoustic emission monitoring and classification of signals in cement composites during early-age hydration.” Construction & Building Materials 196:411–27. https://doi.org/10.1016/j.conbuildmat.2018.11.067.10.1016/j.conbuildmat.2018.11.067 ↗
26. 26. Abouhussien, A. A., and A. A. A. Hassan. 2019. “Monitoring early age strength gain of SCC with different supplementary cementitious materials using acoustic emission sensors.” Construction & Building Materials 229:116858. https://doi.org/10.1016/j.conbuildmat.2019.116858.10.1016/j.conbuildmat.2019.116858 ↗
27. 27. Chotard, T. J., J. Barthelemy, A. Smith, N. Gimet-Breart, M. Huger, D. Fargeot, and C. Gault. 2001. “Acoustic emission monitoring of calcium aluminate cement setting at the early age.” Journal of Materials Science Letters 20 (7): 667–69. https://doi.org/10.1023/A:1010942005907.10.4028/www.scientific.net/kem.206-213.1851 ↗
28. 28. Korda, E., G. De Schutter, and D. G. Aggelis. 2024. “Acoustic signatures of hydration and microcracking in early-age concrete.” Developments in the Built Environment 17:100353. https://doi.org/10.1016/j.dibe.2024.100353.10.1016/j.dibe.2024.100353 ↗