journal article·2022-02-01

Image Processing with Deep Learning: Surface Defect Detection of Metal Gears through Deep Learning

Yavuz Selim Balcioglu, Bulent Sezen, M Sahin Gok, Sezai Tunca

Materials Evaluation· Volume 80· Issue 2
Publisher page

Abstract

Intelligent production requires improved data analytics and better technological possibilities to improve system performance and decision making. With the widespread use of the machine learning process, a growing need has arisen for processing extensive production data, equipped with high volumes, high speed, and high diversity. At this point, deep learning provides advanced analysis tools for processing and analyzing extensive production data. The deep convolutional neural network (DCNN) displays state-of-the-art performance on many grounds, including metal manufacturing surface defect detection. However, there is still space for improving the defect detection performance over generic DCNN models. The proposed approach performed better than the associated methods in the particular area of surface crack detection. The defect zones of disjointed results are classified into their unique classes by a DCNN. The experimental outcomes prove that this method meets the durability and efficiency requirements for metallic object defect detection. In time, it can also be extended to other detection methods. At the same time, the study will increase the accuracy quality of the features that can make a difference in the deep learning method for the detection of surface defects.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Industrial Vision Systems and Defect Detection · Non-Destructive Testing Techniques · Infrastructure Maintenance and Monitoring

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Aldrin, J.C., 2020, “Intelligence Augmentation and Human-Machine Interface Best Practices for NDT 4.0 Reliability,” Materials Evaluation, Vol. 78, No. 7, https://doi.org/10.32548/2020.me-0413310.32548/2020.me-04133 ↗
2. Badanin, V.P., and V.G. Koryakov, 1971, “A Method for More Efficient Utilization of the Digital Computer in Data-Processing Systems,” Cybernetics, Vol. 7, pp. 1101–110310.1007/bf01068841 ↗
3. Chakraborty, D., and M.E. McGovern, 2019, “NDE 4.0: Smart NDE,” 2019 IEEE International Conference on Prognostics and Health Management (ICPHM), 17-20 June, San Francisco, CA, https://doi.org/10.1109/ICPHM.2019.881942910.1109/icphm.2019.8819429 ↗
4. Chen, H., Y. Pang, Q. Hu, and K. Liu, 2020, “Solar Cell Surface Defect Inspection Based on Multispectral Convolutional Neural Network,” Journal of Intelligent Manufacturing, Vol. 31, pp. 453–468, https://doi.org/10.1007/s10845-018-1458-z10.1007/s10845-018-1458-z ↗
5. Chen, P.H., and S.S. Ho, 2016, “Is OverFeat Useful for Image-Based Surface Defect Classification Tasks?” IEEE International Conference on Image Processing, 25–28 September, https://doi.org/10.1109/ICIP.2016.753245710.1109/icip.2016.7532457 ↗
6. Faghih-Roohi, S., S. Hajizadeh, A. Nunez, R. Babuska, and B. De Schutter, 2016, “Deep Convolutional Neural Networks for Detection of Rail Surface Defects,” Proceedings of the International Joint Conference on Neural Networks, https://doi.org/10.1109/IJCNN.2016.772752210.1109/ijcnn.2016.7727522 ↗
7. Kalpakjian, S., 1989, Manufacturing Engineering and Technology, Addison-Wesley Publishers
8. He, K., J. Sun, and X. Tang, 2013, “Guided Image Filtering,” IEEE Transactions on Pattern Analysis and Machine Intelligence, Vol. 35, No. 6, pp. 1397–1409, https://doi.org/10.1109/TPAMI.2012.21310.1109/tpami.2012.213 ↗
9. Jamshidi, A., S. Faghih-Roohi, A. Núñez, R. Babuska, B. De Schutter, R. Dollevoet, and Z. Li, 2016, “Probabilistic Defect-Based Risk Assessment Approach for Rail Failures in Railway Infrastructure,” IFAC-PapersOnLine, https://doi.org/10.1016/j.ifacol.2016.07.01310.1016/j.ifacol.2016.07.013 ↗
10. Jeon, Y.-J., D. Choi, S.J. Lee, J.P. Yun, and S.W. Kim, 2016, “Steel-Surface Defect Detection Using a Switching-Lighting Scheme,” Applied Optics, Vol. 55, No. 1, pp. 47–57, https://doi.org/10.1364/ao.55.00004710.1364/ao.55.000047 ↗
11. Keshari, R., M. Vatsa, R. Singh, and A. Noore, 2018, “Learning Structure and Strength of CNN Filters for Small Sample Size Training,” Proceedings of the IEEE/CVF Conference on Computer Vision and Pattern Recognition, https://doi.org/10.1109/CVPR.2018.0097410.1109/cvpr.2018.00974 ↗
12. Krizhevsky, A., I. Sutskever, and G.E. Hinton, 2012, “ImageNet Classification with Deep Convolutional Neural Networks,” Proceedings of the 25th International Conference on Neural Information Processing Systems, pp. 1097–1105, https://doi.org/10.1145/306538610.1145/3065386 ↗
13. Li, B.-H., B-C. Hou, W.-T. Yu, X.-B. Lu, and C.-W. Yang, 2017, “Applications of Artificial Intelligence in Intelligent Manufacturing: A Review,” Frontiers of Information Technology and Electronic Engineering, Vol. 18, pp. 86–96, https://doi.org/10.1631/FITEE.160188510.1631/fitee.1601885 ↗
14. Li, W., H. Li, Q. Wu, X. Chen, and K.N. Ngan, 2019, “Simultaneously Detecting and Counting Dense Vehicles from Drone Images,” IEEE Transactions on Industrial Electronics, Vol. 66, No. 12, pp. 9651–9662, https://doi.org/10.1109/TIE.2019.289954810.1109/tie.2019.2899548 ↗
15. Lin, H., B. Li, X. Wang, Y. Shu, and S. Niu, 2019, “Automated Defect Inspection of LED Chip Using Deep Convolutional Neural Network,” Journal of Intelligent Manufacturing, Vol. 30, pp. 2525–2534, https://doi.org/10.1007/s10845-018-1415-x10.1007/s10845-018-1415-x ↗
16. Meyendorf, N., P. Heilmann, and L. Bond, 2020, “NDE 4.0 in Manufacturing: Challenges and Opportunities for NDE in the 21st Century,” Materials Evaluation, Vol. 78, No. 7, https://doi.org/10.32548/2020.me-0414410.32548/2020.me-04144 ↗
17. Neogi, N., D.K. Mohanta, and P.K. Dutta, 2014, “Review of Vision-Based Steel Surface Inspection Systems,” EURASIP Journal on Image and Video Processing, https://doi.org/10.1186/1687-5281-2014-5010.1186/1687-5281-2014-50 ↗
18. O’Shea, T., and J. Hoydis, 2017, “An Introduction to Deep Learning for the Physical Layer,” IEEE Transactions on Cognitive Communications and Networking, Vol. 3, No. 4, pp. 563–575, https://doi.org/10.1109/TCCN.2017.275837010.1109/tccn.2017.2758370 ↗
19. Oliva, D., M. Abd Elaziz, and S. Hinojosa, 2019, “Image Processing,” Metaheuristic Algorithms for Image Segmentation: Theory and Applications, pp. 27–45, https://doi.org/10.1007/978-3-030-12931-6_410.1007/978-3-030-12931-6_4 ↗
20. Racki, D., D. Tomazevic, and D. Skocaj, 2018, “A Compact Convolutional Neural Network for Textured Surface Anomaly Detection,” Proceedings of IEEE Winter Conference on Applications of Computer Vision, https://doi.org/10.1109/WACV.2018.0015010.1109/wacv.2018.00150 ↗
21. Rajashekar, U., A.C. Bovik, D. Sage, M. Unser, L.J. Karam, and R.L. Lagendijk, 2005, “Image Processing Education,” Handbook of Image and Video Processing, 2nd edition, pp. 73–95, https://doi.org/10.1016/B978-012119792-6/50069-310.1016/b978-012119792-6/50069-3 ↗
22. Schulenburg, L., 2020, “NDT 4.0: Opportunity or Threat?” Materials Evaluation, Vol. 78, No. 7, https://doi.org/10.32548/2020.me-0413410.32548/2020.me-04134 ↗
23. Sowmya, R., and K.R. Suneetha, 2017, “Data Mining with Big Data,” Proceedings of 11th International Conference on Intelligent Systems and Control, https://doi.org/10.1109/ISCO.2017.785599010.1109/isco.2017.7855990 ↗
24. Tabernik, D., S. Šela, J. Skvarč, and D. Skočaj, 2020, “Segmentation-Based Deep-Learning Approach for Surface-Defect Detection,” Journal of Intelligent Manufacturing, Vol. 31, pp. 759–776, https://doi.org/10.1007/s10845-019-01476-x10.1007/s10845-019-01476-x ↗
25. Tapia, G., and A. Elwany, 2014, “A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing,” Journal of Manufacturing Science and Engineering, Vol. 136, No. 6, https://doi.org/10.1115/1.402854010.1115/1.4028540 ↗
26. Vyas, A., S. Yu, and J. Paik, 2018, “Fundamentals of Digital Image Processing,” Multiscale Transforms with Application to Image Processing, pp. 3–11, https://doi.org/10.1007/978-981-10-7272-7_110.1007/978-981-10-7272-7_1 ↗
27. Weimer, D., B. Scholz-Reiter, and M. Shpitalni, 2016, “Design of Deep Convolutional Neural Network Architectures for Automated Feature Extraction in Industrial Inspection,” CIRP Annals, Vol. 65, No. 1, pp. 417–420, https://doi.org/10.1016/j.cirp.2016.04.07210.1016/j.cirp.2016.04.072 ↗
28. Yu, Q., L. Jibin, and L. Jiang, 2016, “An Improved ARIMA-Based Traffic Anomaly Detection Algorithm for Wireless Sensor Networks,” International Journal of Distributed Sensor Networks, https://doi.org/10.1155/2016/965323010.1155/2016/9653230 ↗
29. Zhou, B., A. Khosla, A. Lapedriza, A. Oliva, and A. Torralba, 2016, “Learning Deep Features for Discriminative Localization,” Proceedings of the IEEE Computer Society Conference on Computer Vision and Pattern Recognition, https://doi.org/10.1109/CVPR.2016.31910.1109/cvpr.2016.319 ↗