journal article·2018-12Open access

Damping behavior of 316L lattice structures produced by Selective Laser Melting

Francesco Rosa, Stefano Manzoni, Riccardo Casati

Materials & Design· Volume 160

Abstract

Selective Laser Melting is a powder-bed additive manufacturing technology that allows producing fully-dense metal objects with complex shapes and high mechanical properties. In this work, Selective Laser Melting was used to produce 316L specimens including lattice structures with the aim of exploring the possibility given by additive manufacturing technologies to produce parts with increased damping capacity, especially in relation to their weight. The internal friction of bulk and lattice specimens was measured in terms of delay between stress and deformation (i.e. tanδ) for different applied loads and frequencies. A finite element model was used to design the test and microstructure investigations were performed to support the results obtained by dynamo-mechanical tests.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Cellular and Composite Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Additive manufacturing of metallic components – process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
2. A critical review of powder-based additive manufacturing of ferrous alloys: process parameters, microstructure and mechanical properties10.1016/j.matdes.2018.02.018 ↗
3. Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: a critical review10.1016/j.matdes.2017.11.021 ↗
4. Metallic microlattice materials: a current state of the art on manufacturing, mechanical properties and applications10.1016/j.matdes.2016.01.146 ↗
5. Microstructure and fracture behavior of 316L austenitic stainless steel produced by selective laser melting10.1016/j.jmst.2016.06.016 ↗
6. Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting10.1016/j.matdes.2016.05.070 ↗
7. Aging response of an A357 Al alloy processed by selective laser melting
8. Low temperature annealing dedicated to AlSi10Mg selective laser melting products10.1016/j.jallcom.2016.12.019 ↗
9. Aging behaviour and mechanical performance of 18-Ni 300 steel processed by selective laser melting10.3390/met6090218 ↗
10. Microstructural characteristics and mechanical properties of carbon nanotube reinforced Inconel 625 parts fabricated by selective laser melting10.1016/j.matdes.2016.09.080 ↗
11. The effect of laser focus shift on microstructural variation of Inconel 718 produced by selective laser melting10.1016/j.matdes.2018.04.019 ↗
12. Two-body wear of CoCr fabricated by selective laser melting compared with different dental alloys10.1007/s11249-015-0601-7 ↗
13. Microstructures and properties of 17-4 PH stainless steel fabricated by selective laser melting10.1016/S2238-7854(12)70029-7 ↗
14. Dislocation network in additive manufactured steel breaks strength–ductility trade-off10.1016/j.mattod.2017.11.004 ↗
15. Selective laser melting of lattice structures: a statistical approach to manufacturability and mechanical behaviour10.1016/j.rcim.2017.06.006 ↗
16. Study on the designing rules and processability of porous structure based on selective laser melting (SLM)10.1016/j.jmatprotec.2013.05.001 ↗
17. Study on topology optimization design, manufacturability, and performance evaluation of Ti-6Al-4V porous structures fabricated by selective laser melting (SLM)10.3390/ma10091048 ↗
18. Stiffness and strength of tridimensional periodic lattices10.1016/j.cma.2012.03.018 ↗
19. Ultralight, Ultrastiff mechanical metamaterials10.1126/science.1252291 ↗
20. On three-dimensional dilational elastic metamaterials10.1088/1367-2630/16/3/033032 ↗
21. Topology optimization based design of lightweight and low vibration gear bodies10.2507/IJSIMM17(1)419 ↗
22. J. Mater. Eng. Perform. · 2014 · 23 · 261410.1007/s11665-014-0889-8 ↗
23. Scaling of mode shapes from operational modal analysis using harmonic forces10.1016/j.jsv.2017.06.033 ↗
24. Ewins · 2000
25. Factors affecting damping in aluminum
26. Internal friction in metallic foams and some related cellular structures10.1016/j.msea.2003.08.083 ↗
27. Damping in some cellular materials10.1016/S0925-8388(03)00241-X ↗
28. Damping in some cellular materials due to microplasticity10.1016/j.msea.2003.08.089 ↗
29. Damping properties of aluminium foams10.1016/0921-5093(95)09973-5 ↗
30. Fatigue-related damping in some cellular metallic materials10.1016/j.msea.2003.08.090 ↗