Gaining flexibility in the design of microstructure, texture and shape memory properties of an Fe-Mn-Si-Cr-Ni alloy processed by ECAE and annealing
Source abstract
Abstract
The effect of ECAE on the properties of an Fe-15Mn-5Si-9Cr-5Ni shape memory alloy (SMA) was investigated. Phases, texture, microstructure, critical temperatures, mechanical and SM properties after severe deformation, and the effect of annealing were analysed. One ECAE pass develops a shear texture. There is a large 〈101〉 component in the extrusion direction, which is near the ideal 〈414〉 for martensitic transformation activation. The pressing did not refine the previous as cast structure but introduced dislocations and ε-martensite. Thus, the stress to induce the γ → ε martensitic transformation, σγ → ε, reached 620 MPa, and the quantity of ε-martensite formed after compression was limited. The degree of shape recovery was reduced, while the reverse transformation temperatures increased. Heat treatments above 800 °C activated recrystallization. As annealing temperature increased, new grains nucleated and grew, reaching a size of 53 μm after heating to 1000 °C. For this condition, σγ → ε was 430 MPa, and the best shape recovery was achieved, 64%.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Shape Memory Alloy Transformations · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Orientation and composition dependencies of shape memory effect in Fe-Mn-Si alloys10.1016/0001-6160(84)90065-8 ↗
2. Texture evolution during thermomechanical treatments in Fe–Mn–Si shape memory alloys10.1016/j.msea.2006.10.214 ↗
3. Segal · Russ. Metall. (Engl. Transl.) · 1981 · 1 · 99
4. Remarkable improvement of recovery stress of Fe–Mn–Si shape memory alloy fabricated by equal channel angular pressing10.1016/j.msea.2006.10.101 ↗
5. Improvement of shape memory effect in an Fe–Mn–Si–Cr–Ni alloy fabricated by equal channel angular pressing10.1016/j.jmatprotec.2007.12.103 ↗
6. Microstructures and shape memory effect of different carbon-bearing FeMnSiCrNi alloys aged after Equal Channel angular pressing10.1007/s11663-007-9022-9 ↗
7. Shape recovery in stainless FeMnSiCrNi(−Co) SMA processed by ECAE10.4028/www.scientific.net/MSF.738-739.252 ↗
8. Workability characteristics and mechanical behavior modeling of severely deformed pure titanium at high temperatures10.1016/j.matdes.2013.07.057 ↗
9. Design and mechanical property analysis of AA1050 turbine blades manufactured by equal channel angular extrusion and isothermal forging10.1016/j.matdes.2013.05.089 ↗
10. Evolution of texture during equal channel angular extrusion of commercially pure aluminum: experiments and simulations10.1016/j.msea.2009.05.028 ↗
11. Texture and fatigue behavior of ultrafine grained copper produced by ECAP10.1016/j.msea.2014.05.011 ↗
12. Evaluation of microstructure anisotropy on room and medium temperature ECAP deformed F138 steel10.1016/j.matchar.2015.06.035 ↗
13. Microstructure and shape memory properties of Fe-15Mn-5Si-9Cr-5Ni melt-spun ribbons10.1016/j.msea.2012.07.097 ↗
14. Driving force for γ→ε martensitic transformation and stacking fault energy of γ in Fe-Mn binary system10.1007/s11661-000-0271-3 ↗
15. Symmetry, texture and the recoverable strain of shape-memory polycrystals10.1016/1359-6454(95)00198-0 ↗
16. Effect of titanium addition on shape memory effect and recovery stress of training-free cast Fe–Mn–Si–Cr–Ni shape memory alloys10.1016/j.msea.2016.01.099 ↗
17. Effect of stacking fault energy on work hardening behaviors in Fe–Mn–Si–C high manganese steels by varying silicon and carbon contents10.1016/j.matdes.2015.07.072 ↗
18. Large recovery strain in Fe-Mn-Si-based shape memory steels obtained by engineering annealing twin boundaries10.1038/ncomms5964 ↗
19. Operational texture analysis10.1016/0921-5093(91)90355-Q ↗
20. Materials processing by simple shear10.1016/0921-5093(95)09705-8 ↗
21. The effect of microstructure on the shape recovery of a Fe–Mn–Si–Cr–Ni stainless steel shape memory alloy10.1016/S1359-6462(02)00348-2 ↗
22. Effects of thermal cycling and plastic deformation upon the Gibbs energy barriers to martensitic transformation in Fe-Mn and Fe-Mn-Co alloys10.1016/S0921-5093(99)00389-5 ↗
23. Characterization of the stress-induced o martensite in a Fe–Mn–Si–Cr–Ni shape memory alloy: microstructural observation at different scales, mechanism of formation and growth10.1016/S0921-5093(97)00458-9 ↗
24. Characterization of phases in an Fe–Mn–Si–Cr–Ni shape memory alloy processed by different thermomechanical methods10.1016/j.matchar.2015.09.026 ↗
25. Development of texture and microstructure during cold rolling and annealing of a Fe-based shape memory alloy10.1007/s11665-009-9428-4 ↗