Dynamic compressive behaviour of Mg foams manufactured by the direct foaming process
Source abstract
Abstract
Increasing interest in lightweight Mg foams for the potential impact energy dissipation application in transport industry requires a good understanding of the dynamic deformation and failure process of the foam. The split-Hopkinson pressure bar technique, combined with high speed photography and post-test scanning electron microscopic examination, was applied to investigate the dynamic behaviour of closed-cell Mg foams manufactured by the direct foaming process. The deformation and failure behaviour at dynamic strain rates was then compared to the quasi-static response. It was found that the fracture of Mg cell walls is brittle and strain rate sensitive. Compared to quasi-static compression, a large quantity of short macro-cracks evolves in cell walls at dynamic strain rates, causing more fragments and thus dissipating more impact energy. The rate dependent fracture mechanisms in cell walls significantly affect the strain rate sensitivity of bulk properties of the foam such as peak stress, plateau stress and energy dissipation capacity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Magnesium Alloys: Properties and Applications · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Dynamic compressive behavior of an ultra-lightweight magnesium foam10.1016/S1359-6462(99)00186-4 ↗
2. Processing of biocompatible porous Ti and Mg10.1016/S1359-6462(01)01132-0 ↗
3. Effects of cell size on quasi-static compressive properties of Mg alloy foams10.1016/j.matdes.2011.07.066 ↗
4. Compressive properties of cellular Mg foams fabricated by melt-foaming method10.1016/j.msea.2010.05.017 ↗
5. Preparation of closed-cell Mg foams using SiO2-coated CaCO3 as blowing agent in atmosphere10.1016/S1003-6326(13)62667-9 ↗
6. Study on fabrication and foaming mechanism of Mg foam using CaCO3 as blowing agent10.1016/j.jallcom.2007.07.098 ↗
7. Amorphous Mg-based metal foams with ductile hollow spheres10.1063/1.2756043 ↗
8. Texture evolution and dynamic mechanical behavior of cast AZ magnesium alloys under high strain rate compressive loading10.1016/j.matdes.2014.04.049 ↗
9. Enhancement of strain-rate sensitivity and shear yield strength of a magnesium alloy processed by high-pressure torsion10.1016/j.scriptamat.2014.09.014 ↗
10. Constitutive behavior of commercial grade ZEK100 magnesium alloy sheet over a wide range of strain rates10.1007/s11661-014-2300-7 ↗
11. Compressive strain-rate sensitivity of magnesium-aluminum die casting alloys10.1016/j.matdes.2008.05.050 ↗
12. Experimental study for the improvement of crashworthiness in AZ91 magnesium foam controlling its microstructure10.1016/S0921-5093(01)01199-6 ↗
13. On the dynamic mechanical properties of open-cell metal foams — a re-assessment of the ‘simple-shock theory’10.1016/j.ijsolstr.2012.03.026 ↗
14. Strain rate dependent compressive properties of glass microballoon epoxy syntactic foams10.1016/j.msea.2009.02.015 ↗
15. Development of high performance lightweight aluminum alloy/SiC hollow sphere syntactic foams and compressive characterization at quasi-static and high strain rates10.1016/j.jallcom.2012.10.171 ↗
16. Dynamic compressive mechanical response of a soft polymer material10.1016/j.matdes.2015.04.035 ↗
17. Quantification of impact energy dissipation capacity in metallic thin-walled hollow sphere foams using high speed photography10.1063/1.3647769 ↗
18. Metal foams: production and stability10.1002/adem.200600071 ↗
19. Microstructure and X-ray microtomographic characterisation of deformation in electrodeposited nickel thin-walled hollow spheres10.1016/j.matlet.2013.03.022 ↗
20. Constitutive and failure behaviour in selective laser melted stainless steel for microlattice structures10.1016/j.msea.2014.11.028 ↗
21. Deformation behaviour of stainless steel microlattice structures by selective laser melting10.1016/j.msea.2014.07.015 ↗
22. The mechanics of three-dimensional cellular materials10.1098/rspa.1982.0088 ↗
23. Fracture behavior of AZ91 magnesium alloy10.1016/S0167-577X(00)00041-0 ↗
24. Ductility enhancement in AZ31 magnesium alloy by controlling its grain structure10.1016/S1359-6462(01)00996-4 ↗
25. Fracture behaviour of a magnesium–aluminium alloy treated by selective laser surface melting treatment10.1016/j.matdes.2013.10.010 ↗
26. Elastic behaviour and failure mechanism in epoxy syntactic foams: the effect of glass microballoon volume fractions10.1016/j.compositesb.2015.04.002 ↗