journal article·2020-05Open access

Fundamentals of the adhesion of physical vapor deposited ZnMg-Zn bilayer coatings to steel substrates

S. Sabooni, M. Ahmadi, E. Galinmoghaddam, R.J. Westerwaal, C. Boelsma, E. Zoestbergen, G.M. Song, Y.T. Pei

Materials & Design· Volume 190

Abstract

In the present study, ZnMg-Zn bilayer coatings with different Mg concentrations and layer thicknesses are deposited on steel substrates by a thermal evaporation process. Thermodynamic calculations reveal that the work of adhesion at the ZnMg/Zn interface (~1.6 J/m2) is lower than that at the Zn/Steel interface (~3 J/m2). This indicates that the ZnMg/Zn interface is inherently weaker than the interface between Zn and steel substrate. The interfacial adhesion strength quantified by the scratch test shows that the adhesion strength at the ZnMg/Zn interface decreases with increasing the Mg content and reaches 66 MPa at 16.5 wt% Mg. It is found that the presence of interfacial defects largely decreases the adhesion strength compared to a defect-free coating. Meanwhile, it is also concluded that the interfacial adhesion strength at the ZnMg/Zn interface does not depend on the thickness of Zn interlayer. The results of the present investigation show that the interfacial adhesion strength is not the only governing parameter for the adhesion performance of the ZnMg-Zn bilayer coatings in forming process, but the thickness of the layers as well as interfacial defect density also play important roles in the adhesion performance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Metal and Thin Film Mechanics · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Kuklík · 2016
2. Multilayered Zn-Ni alloy coatings for better corrosion protection of mild steel
3. Effects of Mn addition on the microstructure and indentation creep behavior of the hot dip Zn coating10.1016/j.matdes.2014.12.012 ↗
4. Atmospheric corrosion of zinc-aluminum alloyed coated steel in depleted carbon dioxide environments10.1149/2.0721807jes ↗
5. Effects of Mg on microstructure and corrosion properties of Zn–Mg alloy10.1016/j.jallcom.2014.03.025 ↗
6. Initial formation of corrosion products on pure zinc and MgZn2 examinated by XPS10.1016/j.corsci.2013.10.029 ↗
7. Chemistry of corrosion products of Zn and MgZn pure phases under atmospheric conditions10.1016/j.corsci.2012.08.014 ↗
8. Surface and cut-edge corrosion behavior of Zn-Mg-Al alloy-coated steel sheets as a function of the alloy coating microstructure10.1007/s12540-015-5411-9 ↗
9. Mg content dependence of EML-PVD Zn-Mg coating adhesion on steel strip10.1007/s11661-016-3634-0 ↗
10. Effect of alloying element segregation on the work of adhesion of metallic coating on metallic substrate: application to zinc coatings on steel substrates10.1016/j.surfcoat.2011.04.014 ↗
11. Hot dip galvanizing behavior of advanced high strength steel10.1002/maco.201005905 ↗
12. Hydrogen embrittlement of high strength steel electroplated with zinc–cobalt alloys10.1016/S0010-938X(03)00180-X ↗
13. Microstructure and adhesion strength quantification of PVD bi-layered ZnMg-Zn coatings on DP800 steel10.1016/j.surfcoat.2018.12.064 ↗
14. New insight into the loss of adhesion of ZnMg-Zn bi-layered coatings10.1016/j.surfcoat.2019.04.085 ↗
15. Effect of interlayer insertion on adhesion properties of ZnMg thin films on steel substrate by PVD method10.1016/j.cap.2012.02.008 ↗
16. A hybrid test method to evaluate the adhesion characteristics of soft coatings on steel substrates - application to Zn-Mg coated steel10.1016/j.surfcoat.2016.05.056 ↗
17. Influence of diffusion on the coating adhesion of zinc-magnesium thin films onto steel10.1016/j.surfcoat.2016.10.063 ↗
18. Boer · 1989
19. Relation between microstructure and adhesion of hot dip galvanized zinc coatings on dual phase steel10.1016/j.actamat.2012.02.003 ↗
20. Enhanced mechanical properties due to structural changes induced by devitrification in Fe-Co-B-Si-Nb bulk metallic glass10.1016/j.actamat.2010.07.047 ↗
21. Adhesion of reactive magnetron sputtered TiNx and TiCy coatings to AISI H13 tool steel10.1016/j.surfcoat.2007.07.073 ↗