journal article·2016-08

MoSi2-borosilicate glass coating on fibrous ceramics prepared by in-situ reaction method for infrared radiation

Xin Tao, Xiaojing Xu, Linlin Guo, Wenhu Hong, Anran Guo, Feng Hou, Jiachen Liu

Materials & Design· Volume 103
Publisher page

Abstract

Abstract MoSi2-borosilicate glass coating with MoSi2 as emittance agent was prepared on mullite fibrous ceramics for enhanced superficial infrared radiation via an in-situ reaction method. The phase and structure evolutions during sintering were studied in detail. The infrared radiating property, impact resistance, thermal shock resistance and thermal endurance of the coating were investigated comprehensively. The results show that the coating was dense and flat, and it tightly adhered to the substrate by mechanical interlocking. During the sintering process, the low-temperature oxidation of MoSi2 was restrained due to the package of binder phase formed below 500 °C, and the coating was fully densified via the viscous flow of molten Si. The total emissivity of the as-prepared coating was higher than 0.85 and the emissivity at low wavelength was higher than 0.9. The impact resistance was preferable attributed to the reinforced transition layer at the interface. The coating went through 30 thermal cycles between 1500 °C and 25 °C without cracking and spalling. The total emissivity declined merely by 4% after oxidation at 1500 °C for 50 h, which was influenced by the MoSi2 content and the surface roughness of the coating.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Glass properties and applications · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Optimization design and analysis of multilayer lightweight thermal protection structures under aerodynamic heating conditions10.1115/1.4007919 ↗
2. A lightweight, high compression strength ultra high temperature ceramic corrugated panel with potential for thermal protection system applications10.1016/j.matdes.2014.06.024 ↗
3. Thermo-mechanical response of superalloy honeycomb sandwich panels subjected to non-steady thermal loading10.1016/j.matdes.2015.09.016 ↗
4. Ballistic performance of porous-ceramic, thermal protection systems10.1016/j.ijimpeng.2012.07.005 ↗
5. Shaping the future of ceramics for aerospace applications10.1111/ijac.12069 ↗
6. Heat transfer in a multi-layered thermal protection system under aerodynamic heating10.1016/j.ijthermalsci.2011.10.019 ↗
7. Effect of temperature on the mechanical behavior of mullite fibrous ceramics with a 3D skeleton structure prepared by molding method10.1016/j.matdes.2015.11.043 ↗
8. Mechanical behavior of fibrous ceramics with a bird's nest structure10.1016/j.compscitech.2014.06.001 ↗
9. Thermal shock behavior and infrared radiation property of integrative insulations consisting of MoSi2/borosilicate glass coating and fibrous ZrO2 ceramic substrate10.1016/j.surfcoat.2015.03.008 ↗
10. Advanced porous coating for low-density ceramic insulation materials10.1111/j.1151-2916.1989.tb06259.x ↗
11. H.E. Goldstein, D.B. Leiser, V. Katvala, Reaction cured borosilicate glass coating for low-density fibrous silica insulation, series Materials Science Research in Borate Glasses (1978) 623-634.10.1007/978-1-4684-3357-9_36 ↗
12. Characterization of the thermal conductivity for advanced toughened uni-piece fibrous insulations
13. Fletcher
14. Leiser
15. Stewart
16. Stewart
17. Development of new TPS at NASA Ames Research Center
18. Oxidation behavior and kinetics of SiC/alumina-borosilicate coating for carbon-carbon composites10.1016/j.apsusc.2008.06.169 ↗
19. The effects of MoSi2 on the oxidation behavior of carbon/carbon composites10.1016/S0008-6223(00)00248-7 ↗
20. The oxidation behaviour of uniaxial hot pressed MoSi2 in air from 400 to 1400 degrees C10.1016/j.intermet.2011.03.029 ↗
21. A Si-Mo-W coating to protect SiC-coated carbon/carbon composites against oxidation10.1111/j.1551-2916.2009.03144.x ↗
22. Oxidation protective multilayer coatings for carbon-carbon composites10.1016/S0008-6223(01)00151-8 ↗
23. Glass coatings on stainless steels for high-temperature oxidation protection: mechanisms10.1016/j.corsci.2014.01.033 ↗
24. The oxidation and oxygen permeation resistance of quartz particle-reinforced aluminosilicate glass coating on titanium alloy10.1111/j.1551-2916.2011.04587.x ↗
25. Preparation and thermal expansion coefficient control of MoSi2-Al2O3-SiO2 coating with high temperature resistance and emissivity
26. Microstructure, radiative property and thermal shock behavior of TaSi2SiO2-borosilicate glass coating for fibrous ZrO2 ceramic insulation10.1016/j.jallcom.2015.10.003 ↗
27. Effect of glass phase content on structure and properties of gradient MoSi2-BaO-Al2O3-SiO2 coating for porous fibrous insulations10.1016/j.jallcom.2015.09.099 ↗
28. High emissivity coatings for high temperature application: progress and prospect10.1016/j.tsf.2009.03.175 ↗
29. Double layer SiO2/Al2O3 high emissivity coatings on stainless steel substrates using simple spray deposition system10.1016/j.apsusc.2014.01.159 ↗
30. Evaluation of hemispherical total emissivity for thermal radiation calorimetry10.1023/A:1006670409740 ↗
31. Laminar Fe-based amorphous composite coatings with enhanced bonding strength and impact resistance10.1016/j.actamat.2014.03.047 ↗
32. Oxidation protection for carbon fibre composites10.1007/BF00357844 ↗
33. Joining of C/C composites by using B4C reinforced phosphate adhesive10.1016/j.ceramint.2014.03.123 ↗
34. Self-generating high-temperature oxidation-resistant glass-ceramic coatings for C-C composites using UHTCs10.1111/jace.13017 ↗
35. Thermal infrared directional emissivity of powdered quartz10.1029/95JB02400 ↗
36. Spectral reflectance and emissivity features of broad leaf plants: prospects for remote sensing in the thermal infrared (8.0–14.0mum)10.1016/j.rse.2007.01.008 ↗
37. Low temperature oxidation of fully dense and porous MoSi210.1016/S0921-5093(98)01078-8 ↗