journal article·2015-11

The effect of zirconium addition on sintering behaviour, microstructure and creep resistance of the powder metallurgy processed alloy Ti–45Al–5Nb–0.2B–0.2C

Juliano Soyama, Michael Oehring, Wolfgang Limberg, Thomas Ebel, Karl Ulrich Kainer, Florian Pyczak

Materials & Design· Volume 84
Publisher page

Abstract

Abstract Since the presence of retained β phase might be detrimental for the creep properties of titanium aluminides, elements that stabilize the β phase, e.g. Nb and Mo, can only be used within a limited range. In this work, additions of the neutral element Zr to the alloy Ti–45Al–5Nb–0.2B–0.2C (in at.%) through elemental powder metallurgy were investigated. A powder-metallurgical processing route has been selected for this study, as it appears attractive with respect to microstructural homogeneity and manufacturing costs of complex parts. Different alloys with Zr content varying from 1 to 5 at.% were prepared by uniaxial pressing of a mix of elemental and pre-alloyed powders together with a binder system. The mechanical properties were evaluated by hardness and compression creep tests. The results indicate that Zr significantly decreases the melting point of the base alloy, which directly influences the sintering behaviour and with increasing Zr content the optimum sintering temperature decreases. The creep resistance showed a general improvement with increasing Zr content. The Zr additions resulted in the formation of γ phase enriched with Zr at the colony boundaries, the implications of which are discussed in the paper.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Gamma Ti aluminides for non-aerospace applications10.1016/S1359-0286(99)00023-6 ↗
2. Development of a TiAl turbocharger for passenger vehicles10.1016/S0921-5093(01)01584-2 ↗
3. Review of alloy and process development of TiAl alloys10.1016/j.intermet.2005.10.019 ↗
4. Materials selection in design of structures and engines of supersonic aircrafts: a review10.1016/j.matdes.2012.10.001 ↗
5. Development of TiAl alloys with excellent mechanical properties and oxidation resistance10.1016/j.matdes.2013.08.083 ↗
6. γ-Titanium aluminide alloys: alloy design and properties
7. Novel design concepts for gamma-base titanium aluminide alloys10.1016/S0966-9795(00)00036-4 ↗
8. Effect of chromium addition on microstructure and creep strength of as-cast Ti–48Al alloy10.1016/j.msea.2006.11.168 ↗
9. Microstructure and creep strength of fully-lamellar TiAl alloys containing beta-phase10.1016/S0921-5093(01)01638-0 ↗
10. Creep of a beta phase-containing TiAl alloy10.1016/S0966-9795(00)00009-1 ↗
11. High temperature deformation behavior of titanium-aluminide based gamma plus beta microduplex alloy10.2355/isijinternational.31.728 ↗
12. High temperature mechanical properties of vanadium alloyed γ base titanium-aluminides10.1016/0956-7151(94)90204-6 ↗
13. Superplastic behavior of a powder metallurgy TiAl alloy with a metastable microstructure10.1016/S0966-9795(98)00017-X ↗
14. Strengthening of a fully lamellar TiAl+W alloy by dynamic precipitation of β phase during long-term creep10.1016/j.scriptamat.2005.10.018 ↗
15. Phase equilibria among α (hcp), β (bcc) and γ (L10) phases in Ti–Al base ternary alloys10.1016/S0966-9795(00)00015-7 ↗
16. Lütjering · 2007
17. Effect of ternary additions on mechanical properties of TiAl10.1016/S1359-6454(97)00422-9 ↗
18. Comment on Ti–Zr (titanium–zirconium)10.1007/BF02645305 ↗
19. 2006 · 1
20. Microstructural anisotropy, uniaxial and biaxial creep behavior of Ti–45Al–5Nb–0.2B–0.2C10.1016/j.msea.2008.10.058 ↗
21. Microstructure and mechanical properties of Ti 45Al 5Nb+(0–0.5C) sheets10.1016/j.intermet.2008.02.004 ↗
22. Thermo-mechanical fatigue behaviour of the γ-TiAl alloy TNB-V510.1016/j.scriptamat.2005.09.049 ↗
23. Influence of the sintering atmosphere on the tensile properties of MIM-processed Ti 45Al 5Nb 0.2B 0.2C10.1016/j.msea.2012.05.047 ↗
24. Microstructure and mechanical properties of high Nb containing TiAl alloy parts fabricated by metal injection molding10.1016/j.msea.2009.07.003 ↗
25. Phase formation kinetics of titanium aluminides produced from elemental powder mixtures
26. Pore formation during reactive sintering of extruded titanium aluminum powder mixtures
27. Powder metallurgical processing of intermetallic gamma titanium aluminides10.1002/adem.200310559 ↗
28. The sintering densification, microstructure and mechanical properties of gamma Ti–48Al–2Cr–2Nb alloy with a small addition of copper10.1016/j.msea.2012.08.100 ↗
29. The effect of a small addition of nickel on the sintering, sintered microstructure, and mechanical properties of Ti–45Al–5Nb–0.2C–0.2B alloy10.1016/j.jallcom.2013.05.104 ↗
30. Enhanced sintering of pre-alloyed binary TiAl powder by a small addition of iron10.4028/www.scientific.net/KEM.520.89 ↗
31. Mechanical properties of porous titanium compacts prepared by powder sintering10.1016/j.scriptamat.2003.08.018 ↗
32. Soyama · 2012 · vol. 1 · 151
33. German · 1994
34. Investigations on Ti–6Al–4V with gadolinium addition fabricated by metal injection moulding10.1016/j.matdes.2013.05.003 ↗
35. Alloy design concepts for refined gamma titanium aluminide based alloys10.1016/j.intermet.2006.05.003 ↗
36. Site preference of Zr in Ti3Al and phase stability of Ti2ZrAl10.1007/BF02712793 ↗
37. Study of the local atomic strain field in a Zr-doped TiAl intermetallic alloy by EXAFS and ab initio FLAPW calculations10.1016/S0304-3991(00)00118-2 ↗
38. Theoretical investigation of ductilizing effects of alloying elements on TiAl10.1016/S0966-9795(97)00060-5 ↗
39. Pore formation and compressive deformation in porous TiAl–Nb alloys containing directional pores10.1016/j.matdes.2013.02.031 ↗
40. Microstructural development and mechanical properties of PM Ti–45Al–2Nb–2Mn–0.8vol.%TiB2 processed by field assisted hot pressing10.1016/j.jmst.2014.08.008 ↗
41. Heat treatment and mechanical properties of powder metallurgy processed Ti–35.5Nb–5.7Ta beta-titanium alloy10.1016/j.matchar.2013.08.006 ↗
42. Effects of sintering atmosphere on microstructure and mechanical property of sintered powder metallurgy 316L stainless steel10.1016/j.matdes.2013.06.035 ↗
43. Feasibility study of the production of biomedical Ti–6Al–4V alloy by powder metallurgy10.1016/j.msec.2015.01.043 ↗
44. Effect of solidification parameters on the microstructure and creep property of a single crystal Ni-base superalloy10.1016/S1005-0302(10)60142-9 ↗
45. Ordered intermetallic alloys, part III: gamma titanium aluminides10.1007/BF03220745 ↗