journal article·2020-01Open access

Conductivity and foldability enhancement of Ag patterns formed by PVAc modified Ag complex inks with low-temperature and rapid sintering

Junjie Li, Xiwen Zhang, Xingyue Liu, Qi Liang, Guanglan Liao, Zirong Tang, Tielin Shi

Materials & Design· Volume 185

Abstract

In the research area of conductive inks for printed electronics, the preparation of conductive circuits generally shows high requirements on the process temperature, process efficiency, electrical conductivity, foldability and so on. In this paper, a new type of Ag complex conductive ink modified by PVAc (poly vinyl acetate) was proposed to enhance the conductivity and foldability of rapidly sintered Ag patterns. The conductive ink was fabricated by mixing silver oxalate as Ag precursor, 1,2-Diaminopropane as complexing reagent, methanol and isopropanol as organic solvents, and a small amount of PVAc as binding agent. Compared to the Ag complex ink without PVAc, the modified ink shows a better sintered microstructure with higher flatness and density after fast sintering at 140 °C–200 °C for 2 min, indicating that the addition of PVAc has a positive effect on the stability of Ag nucleation and microstructure formation. A low resistivity of 5.17 μΩ cm and an improved foldable property can be achieved at 180 °C by sintering the PVAc modified Ag complex ink on PI (polyimide) substrate, which indicates that the proposed ink is promised to be applied in printed circuits and flexible electronics.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Nanomaterials and Printing Technologies · Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Ink-jet printing of Cu-Ag-based highly conductive tracks on a transparent substrate10.1021/la802182y ↗
2. Direct writing of copper conductive patterns by ink-jet printing10.1016/j.tsf.2006.11.142 ↗
3. Ink-jet printing of Cu conductive ink on flexible substrate modified by oxygen plasma treatment10.1016/j.surfcoat.2010.08.039 ↗
4. Flexible supercapacitor fabrication by room temperature rapid laser processing of roll-to-roll printed metal nanoparticle ink for wearable electronics application10.1016/j.jpowsour.2013.08.012 ↗
5. A water-based silver-nanowire screen-print ink for the fabrication of stretchable conductors and wearable thin-film transistors10.1002/adma.201600772 ↗
6. Highly concentrated, ultrathin nickel hydroxide nanosheet ink for wearable energy storage devices10.1002/adma.201703455 ↗
7. All inkjet-printed graphene-silver composite ink on textiles for highly conductive wearable electronics applications10.1038/s41598-019-44420-y ↗
8. Microfibrillated cellulose based ink for eco-sustainable screen printed flexible electrodes in lithium ion batteries10.1016/j.jmst.2016.02.010 ↗
9. Fully written flexible potentiometric sensor using two-dimensional nanomaterial-based conductive ink10.1021/acs.analchem.8b04334 ↗
10. Flexible fiber-shaped supercapacitor based on nickel-cobalt double hydroxide and pen ink electrodes on metallized carbon fiber10.1021/acsami.6b16101 ↗
11. Inkjet printed flexible electrodes for surface electromyography
12. Inkjet printing of reactive silver ink on textiles10.1021/acsami.8b18231 ↗
13. Silver nanowire ink for flexible circuit on textiles10.3390/mi10010042 ↗
14. Enhancing the performance of stretchable conductors for E-textiles by controlled ink permeation10.1002/adma.201605848 ↗
15. Ink-jet printing: the route to production of full-color P-OLED displays10.1889/1.2206109 ↗
16. OLED with a controlled molecular weight of the PVK (poly(9-vinylcarbazole)) formed by a reactive ink-jet process
17. Inkjet printed paper based frequency selective surfaces and skin mounted RFID tags: the interrelation between silver nanoparticle ink, paper substrate and low temperature sintering technique10.1039/C4TC02693D ↗
18. A UV curable conductive ink for the fabrication of textile-based conductive circuits and wearable UHF RFID tags
19. Inkjet printing of epidermal RFID antennas by self-sintering conductive ink10.1109/TMTT.2017.2767594 ↗
20. Inkjet printing and low power laser annealing of silver nanoparticle traces for the realization of low resistivity lines for flexible electronics10.1016/j.mee.2010.12.099 ↗
21. Demonstration of inkjet-printed silver nanoparticle microstrip lines on alumina for RF power modules
22. WORM and bipolar inkjet printed resistive switching devices based on silver nanocomposites10.1088/2058-8585/aa64be ↗
23. Non-vacuum mechanochemical route to the synthesis of Cu2SnS3 nano-ink for solar cell applications10.1016/j.actamat.2014.11.043 ↗
24. Fabrication of Cu2ZnSnS4 thin films using oxides nanoparticles ink for solar cell10.1016/j.jpowsour.2014.11.112 ↗
25. ITO-free flexible polymer solar cells with ink-jet-printed Ag grids10.1088/0268-1242/27/12/125002 ↗
26. Inkjet printing of conjugated polymer precursors on paper substrates for colorimetric sensing and flexible electrothermochromic display10.1002/adma.201103471 ↗
27. An electrophoretic ink for all-printed reflective electronic displays10.1038/28349 ↗
28. Highly conductive copper nano/microparticles ink via flash light sintering for printed electronics10.1088/0957-4484/25/26/265601 ↗
29. Laser induced forward transfer of Ag nanoparticles ink deposition and characterization10.1016/j.apsusc.2014.01.069 ↗
30. Fabrication of highly conductive and flexible printed electronics by low temperature sintering reactive silver ink10.1016/j.apsusc.2018.07.187 ↗
31. Silver nanoparticle ink technology: State of the art
32. The novel Cu nanoaggregates formed by 5 nm Cu nanoparticles with high sintering performance at low temperature10.1016/j.matlet.2017.12.094 ↗
33. A novel method of synthesizing antioxidative copper nanoparticles for high performance conductive ink10.1007/s10854-017-7195-9 ↗
34. Design of Cu nanoaggregates composed of ultra-small Cu nanoparticles for Cu-Cu thermocompression bonding10.1016/j.jallcom.2018.09.115 ↗
35. Low-temperature and low-pressure Cu–Cu bonding by highly sinterable Cu nanoparticle paste10.1186/s11671-017-2037-5 ↗
36. Room-temperature joining of silver nanoparticles using potassium chloride solution for flexible electrode application10.1021/acs.jpcc.7b10601 ↗
37. Effect of morphology on the electrical resistivity of silver nanostructure films10.1021/acsami.6b12289 ↗
38. Selective laser sintering of laser printed Ag nanoparticle micropatterns at high repetition rates10.3390/ma11112142 ↗
39. Comparison of thermal decomposition and chemical reduction of particle-free silver ink for inkjet printing10.1016/j.tsf.2017.06.010 ↗
40. Facile preparation of stable reactive silver ink for highly conductive and flexible electrodes10.1016/j.apsusc.2018.12.261 ↗
41. Silver oxalate ink with low sintering temperature and good electrical property10.1007/s11664-018-6149-1 ↗
42. Versatile molecular silver ink platform for printed flexible electronics10.1021/acsami.7b02573 ↗
43. A water-soluble ink based on diamine silver(I) carbonate, ammonium formate, and polyols for inkjet printing of conductive patterns10.1002/ejic.201801045 ↗
44. Synthesis of nickel oxide nanoparticles using nickel acetate and poly(vinyl acetate) precursor10.1016/j.mseb.2005.11.021 ↗
45. Synthesis and characterisation of zirconium oxide nanofibers by electrospinning10.1080/15533170500471391 ↗
46. Facile synthesis of high silver content MOD ink by using silver oxalate precursor for inkjet printing applications10.1016/j.tsf.2015.06.001 ↗
47. Gel P (VdF/HFP)/PVAc/lithium hexafluorophosphate composite electrolyte containing nano ZnO filler for lithium ion batteries application: effect of nano filler concentration on structure, thermal stability and transport properties10.1016/j.polymertesting.2016.10.028 ↗
48. Structure, thermal and transport properties of PVAc-LiClO4 solid polymer electrolytes10.1016/j.jpcs.2006.12.001 ↗
49. Accelerated sintering in phase-separating nanostructured alloys10.1038/ncomms7858 ↗