Low-cycle fatigue behavior of fiber-laser welded, corrosion-resistant, high-strength low alloy sheet steel
Source abstract
Abstract
Abstract Advanced laser welding techniques such as fiber laser welding are desirable for joining high-strength steels in ground vehicle applications since they can greatly increase productivity. Weld fatigue is a primary design consideration for implementation of laser-welded sheet into ground vehicle structures. However, much of the previous fatigue work on fiber laser welded sheet steel has utilized stress-controlled fatigue testing. Therefore, this paper presents an optimized fiber laser welding procedure for butt welds of high-strength low-alloy steel sheet, and subsequent fully-reversed, strain-controlled low-cycle fatigue testing on weld material. Existing low cycle fatigue models adequately describe fatigue behavior of the laser welds. The results show that weld low cycle fatigue strength is significantly increased relative to base metal due to formation of martensite in the weld caused by rapid cooling inherent to laser welding. Weld fatigue life was shorter than base metal when plastic strains were high, but was close to base metal at lower plastic strains. Fatigue specimens containing weld failed at both base metal and in the weld indicating that there is some competition between weld cyclic fatigue strength and stress concentration effect at the weld fusion zone.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Fatigue and fracture mechanics · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Welding with high power fiber lasers — a preliminary study10.1016/j.matdes.2006.01.009 ↗
2. Characterization of fiber laser welds in X100 pipeline steel10.1016/j.matdes.2008.09.042 ↗
3. Fiber laser-GMA hybrid welding of commercially pure titanium10.1016/j.matdes.2008.04.043 ↗
4. Hybrid fiber laser — arc welding of thick section high strength low alloy steel10.1016/j.matdes.2011.02.002 ↗
5. Comparative study of laser welding in tailor blanks for the automotive industry10.1007/s00170-009-2385-0 ↗
6. Microstructure and fatigue performance of single and multiple linear fiber laser welded DP980 dual-phase steel10.1016/j.msea.2012.05.091 ↗
7. Microstructure and fatigue properties of fiber laser welded dissimilar joints between high strength low alloy and dual-phase steels10.1016/j.matdes.2013.04.076 ↗
8. Effects of concavity on tensile and fatigue properties in fibre laser welding of automotive steels10.1179/1362171813Y.0000000163 ↗
9. A structural stress definition and numerical implementation for fatigue analysis of welded joints10.1016/S0142-1123(01)00055-X ↗
10. Strain-controlled fatigue properties of steels and some simple approximations10.1016/S0142-1123(00)00026-8 ↗
11. Cyclic material properties distribution in laser-welded joints10.1016/j.ijfatigue.2005.07.029 ↗
12. Tensile and fatigue properties of fiber laser welded high strength low alloy and DP980 dual-phase steel joints10.1016/j.matdes.2012.07.017 ↗
13. Microstructure and mechanical properties of fiber laser welded joints of ultrahigh-strength steel 22MnB5 and dual-phase steels10.1557/jmr.2014.273 ↗
14. Development of laser beam welding of advanced high-strength steels10.1007/s00170-015-7701-2 ↗
15. Tensile properties of fiber laser welded joints of high strength low alloy and dual-phase steels at warm and low temperatures10.1016/j.matdes.2013.10.087 ↗
16. Hot cracking in iron base alloys effect of solidification mode
17. ASTM · 2012
18. ASTM · 2011
19. Hutchings · 2005
20. Simmons · 1971
21. Fiber laser welding of dual-phase galvanized sheet steel (DP590): traditional analysis and new quality assessment techniques
22. Grong · 1997
23. A second report on diagrams of microstructure and hardness for heat-affected zones in welds10.1016/0001-6160(84)90176-7 ↗
24. GM · 2002
25. Krauss · 1980
26. Correlation of yield strength and tensile strength with hardness for steels10.1007/s11665-008-9225-5 ↗
27. Residual stress. Part 1 — measurement techniques10.1179/026708301101509980 ↗
28. Residual stress. Part 2 — nature and origins10.1179/026708301101510087 ↗
29. Effects of mean stress on fatigue behaviour of a hardened carbon steel10.1016/0142-1123(91)90248-W ↗
30. Krupp · 2007
31. Campbell · 2008
32. Mean stress effects on low cycle fatigue for a high strength steel10.1111/j.1460-2695.1991.tb00672.x ↗