Mechanical Properties of Semi-Regular Lattices
Source abstract
Abstract
The mechanical properties of seven semi-regular lattices were derived analytically for in-plane uniaxial compression and shear. These analytical expressions were then validated using Finite Element simulations. Our analysis showed that one topology is stretching-dominated; two are stretching-dominated in compression but bending-dominated in shear; and four are bending-dominated. To assess their potential, the properties of these seven semi-regular topologies were compared to regular lattices. We found the elastic buckling strength of the stretching-dominated semi-regular tessellation to be 43% higher than a regular triangular lattice. In addition, three of the four bending-dominated semi-regular topologies had a higher elastic modulus than a regular hexagonal lattice. In fact, one of these bending-dominated topologies was 85% stiffer and 11% stronger than a hexagonal lattice. This topology would be ideal for applications requiring a high stiffness and high energy absorption.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Cellular and Composite Structures · Advanced Materials and Mechanics · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. 3D metamaterials10.1038/s42254-018-0018-y ↗
2. Mechanical metamaterials and their engineering applications10.1002/adem.201800864 ↗
3. Mechanical metamaterials at the theoretical limit of isotropic elastic stiffness10.1038/nature21075 ↗
4. 3D plate-lattices: An emerging class of low-density metamaterial exhibiting optimal isotropic stiffness10.1002/adma.201803334 ↗
5. Design of isotropic porous plates for use in hierarchical plate-lattices10.1016/j.matdes.2021.110218 ↗
6. High fracture toughness micro-architectured materials10.1016/j.jmps.2020.104060 ↗
7. Increasing fracture toughness via architected porosity10.1016/j.matdes.2021.109696 ↗
8. Strong and tough bioinspired additive-manufactured dual-phase mechanical metamaterial composites10.1016/j.jmps.2021.104341 ↗
9. Improved mechanical properties and energy absorption of Ti6Al4V laser powder bed fusion lattice structures using curving lattice struts10.1016/j.matdes.2021.110140 ↗
10. Additive-manufactured hierarchical multi-circular lattice structures for energy absorption application10.1016/j.matdes.2021.110116 ↗
11. Mechanical responses of 3d cross-chiral auxetic materials under uniaxial compression10.1016/j.matdes.2019.108226 ↗
12. 3D cellular metamaterials with planar anti-chiral topology10.1016/j.matdes.2018.02.052 ↗
13. Morphological optimization of tensegrity-type metamaterials10.1016/j.compositesb.2016.10.017 ↗
14. Tensegrity metamaterials: toward failure-resistant engineering systems through delocalized deformation10.1002/adma.202005647 ↗
15. On the practicability of pentamode mechanical metamaterials10.1063/1.4709436 ↗
16. Extreme mechanical properties of regular tensegrity unit cells in 3D lattice metamaterials10.3390/ma13214845 ↗
17. Micro-architectured materials: past, present and future10.1098/rspa.2010.0215 ↗
18. Williams · 1979
19. The properties of foams and lattices10.1098/rsta.2005.1678 ↗
20. Foam topology: bending versus stretching dominated architectures10.1016/S1359-6454(00)00379-7 ↗
21. Gibson · 1997
22. Effective mechanical and transport properties of cellular solids10.1016/S0020-7403(97)00031-3 ↗
23. In-plane stiffness and yield strength of periodic metal honeycombs10.1115/1.1646165 ↗
24. The compressive and shear responses of corrugated and diamond lattice materials10.1016/j.ijsolstr.2005.07.045 ↗
25. Uniaxial local buckling strength of periodic lattice composites10.1016/j.matdes.2009.04.034 ↗
26. Tensile response of elastoplastic lattices at finite strain10.1016/j.jmps.2017.02.002 ↗
27. Experimental study of modulus, strength and toughness of 2D triangular lattices10.1016/j.ijsolstr.2018.06.028 ↗
28. Optimal and manufacturable two-dimensional, Kagomé-like cellular solids10.1557/JMR.2002.0021 ↗
29. The damage tolerance of elastic-brittle, two-dimensional isotropic lattices10.1016/j.jmps.2006.08.004 ↗
30. Kagome plate structures for actuation10.1016/S0020-7683(03)00348-2 ↗
31. Actuation of the Kagome Double-Layer Grid. Part 1: Prediction of performance of the perfect structure10.1016/j.jmps.2005.02.011 ↗
32. Stiffness and strength of a semi-regular lattice
33. Analysis of the elastostatic specific stiffness of 2D stretching-dominated lattice materials10.1016/j.mechmat.2010.05.003 ↗
34. A quest for 2D lattice materials for actuation10.1016/j.jmps.2017.05.007 ↗
35. Timoshenko · 1961
36. Bažant · 2010
37. Sufficient symmetry conditions for isotropy of the elastic moduli tensor10.1115/1.3173115 ↗